1、A-A-52543 = 9399974 0369457 OT5 I INCH-POUND I A-A-52543 - SUPERSEDING MS53034A 5 November 1963 COMMERCIAL ITEM DESCRIPTION FIFTH WHEEL ASSEMBLY-36 INCH UNIVERSAL, TRUCK-TRACTOR, 45000 LBS. CAPACITY The General Services Administration has authorized the use of this Commercial Item Description (CID)
2、for all federal agencies. 1. S2CP33. This CID covers requirements for a fifth wheel assembly used in coupling a truck-tractor to a trailer. 2. SALIENT CHARACTERISTICS 2.1 Material. The materials shall be in accordance with the manufacturer?s material specifications for fifth wheels. The use of recov
3、ered material made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see 5.4). 2.2 * accordance with figure 1. . The fifth wheel assembly shall be designed and constructed in 1 Beneficial comments, recommendations, additions, deletions clar
4、ifications, etc. and any other data which may improve this document should be sent by letter to: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-EBLUE. Warren, MI 48397-5000. FSC 2510 TRUTIONSTATEMF.NT A. Approved for public release; distribution is unlimited. Provided by IHSNot for
5、ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52543 m 7777774 OLb7Lt58 T31 m A-A-52543 43 I NOTES: 1. Fifth wheel assembly requires use of 3 1.4 inch kingpin as shown in 2. Dimensions are in inches. Unless otherwise specified, tolerances are i .06. 3. This CID is not
6、 intended to limit construction to features other than specified herein, by dimensions, notations, or referenced documents. 4. The use of asterisks (*) indicates that dimensions are covered by international agreement (see 5.5). A-A-52479. FIGURE 1. v. 2 Provided by IHSNot for ResaleNo reproduction o
7、r networking permitted without license from IHS-,-,-A-A-52543 9999974 0369459 978 A-A-52543 e . Identification and markings of the fifth wheel assemblies shall 1. . 2.3 be permanent and legible and shall include, as a minimum, the manufacturers identification code (CAGE), the manufacturers part numb
8、er, and the part identification number (PIN) AA52543-1 (see 5.2). 3. QUALITY ASSURANCE PROVISIONS . 3.1 lhqmmbhty for impcm * . The contractor is responsible for the performance of all inspections (examinations and tests). 3.2 a a e . The contractor shall certify and maintain substantiating evidence
9、 that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producers own drawings, specifications, workmanship . standards, and quality assurance practices. Items with known defects shall not be submitted for Government accept
10、ance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4. PRESFaRVATTON, PACKAGING, PACC. Preservation, packaging, packing, labeling, and marking for the desired le
11、vel shall be as specified in the contract (see 5.2). 5. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 5.1 Addresses for ddamngmw. 5.1.1 Government. Copies of A-A-52479 “Kingpin, Fifth Wheel 3 1/2 Inch” are available from the S
12、tandardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094. 5.2 . Acquisition documents must specify the following: a. Title, number, and date of this CID. b. Issue of the DODISS to be cited in the solicitation. c. PIN number and quantity of fifth wheel assembl
13、ies required. d. Selection of applicable level and packaging requirements. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52543 9999974 0369460 b9T m A-A-52543 5.3 Cross-referen cedaia. Fifth wheel assemblies conforming to this CID are interch
14、angeable/ substitutable with fifth wheel assemblies conforming to MS53034A. 5.4 Re- ts. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. 5.5 subject of international standardization agreement QSTAG 284 and NATO-ST
15、ANAG 4009. When amendment, revision, or cancellation of this CID is proposed that will modify the international agreement concerned, the preparing activity will take appropriate action through international channels, including departmental standardization offices, to change the agreement or make oth
16、er appropriate accommodations. tim. Certain provisions of this CID (see figure 1) are the MILITARY INTERESTS: Custodians: Army - AT Navy - MC Air Force - 99 CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Amy - AT (Project 25 10-01 34) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
