1、s d 3 7 -/- MIL-G-51374 (EA) AMENDMENT 1 3 April 1987 1 MILITARY SPECIFICATION GRENADE, HAND, RED SMOKE, RS, M48 This amendment forms a part of MILG-51374(EA), dated . 15 November 1374, and is approved for use within the Chemical Research, Development and Engineering Center, Department of the Army a
2、nd is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 2.1: Under “SPECIFICATIONS“ “FEDERAL“ : 3elete “Flat“ from “QQ-S-781 - Strapping, Steel, Flat and Seals. Delete “TT-TJ-572 - Wood Preservative, Water Repellent .If Under “SPEC thlICATIONS“ “MILITARY If : Del
3、ete “MIL-8-2427 - Boxes , Ammunition Packing; Wood, Nailed.“ Add “MIL-B-46506 - Boxes , Amraimition Packing Wood, Wirebound. “ PAGE 6 Change “Preparation for delivery (Section 5) .“ to “Packaging (section 5) .If Add to the list of defects II108 Strapping missing or incorrect“ 4.4.4.2, line 5: Delete
4、 “function, . . . onto ai and substitute “function, the tape over the grenade enission port shall be removed, the grenade armed and thrown at least 50 feet onto a“. AMSC N/A FSC 1330 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. J Page I of 2 . Provided by IHSNot
5、for ResaleNo reproduction or networking permitted without license from IHS-,-,-. _ MIL-G-51374 (1) 13 9999706 0333787 1 MIL-G-51374 ( EA) AMENDMENT 1 PAGE 7 5: Delete “PRETARATION FOR DELIVERY“ and substitute “PACKAGING“. 5.1, line 1: Delete “Packaging, level A.“ and substitute “Preservation, level
6、A.“ 5.2:. Line 2: After “box“ add I, Grade Ayf1. Lines 5-9: Delete “Prior to loading, . . in MIL-B-2427.“ Lines 11-13: Delete the last two sentences in their entirety and substi- The 1-)+6506 tute “The PPP-ELO and PPP-621 boxes shall be closed and strapped in accor- dance with the appendix of the ap
7、plicable box specification. boxes shall be-strapped using 5/8 by 0.020 inch strapping, class 1, type I, finish A or finish B, grade 2; and seals type D, style I or IV, class R, finish B,grade 2 conforming to &Q-S-781. Straps shall be applied straight, at right- angles to the edges of the box, and un
8、der sufficient tension to firmly grip the edges of the face board material. at the closing edges of the box are twisted or looged. as near as practicabe, but not more than 3 inches from each end edge of the box.“ Strapping shall be applied before the wires Straps shall be placed PAGE 8 Add new parag
9、raph 6.7 as follows : “6.7 International interest. Certain provisions of this specification are the subject of international standardization agreement ABCA - Army Quadripar- tite Standardization Agreement - 319. When amendment, revision, or cancella- tion of this specification is proposed vhich will
10、 modify the international wreement concerned , the preparing activity will take appropriate act ion through international standardization channels including departmental stan- dardization offices to change the agreement or mke other appropriate accommodations .“ Custodian : Preparing activity: Am - EA Project No. 1330-A305 ! 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-