1、 AS/NZS CISPR 15:2006 CISPR 15:2005 Australian/New Zealand Standard Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment AS/NZS CISPR 15:2006Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007AS/NZS CISPR 15:2006
2、 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee TE-003, Electromagnetic Interferences. It was approved on behalf of the Council of Standards Australia on 10 April 2006 and on behalf of the Council of Standards New Zealand on 19 May 2006. This Standard was publis
3、hed on 2 June 2006. The following are represented on Committee TE-003: Australian Broadcasting Corporation Australian Chamber of Commerce and Industry Australian Communications and Media Authority Australian Electrical and Electronic Manufacturers Association Australian Information Industry Associat
4、ion Consumer Electronics Supplier Association Electrical Compliance Testing Association Engineers Australia Free TV Australia Ministry of Economic Development, New Zealand National Measurement Institute SingTel Optus Society of Automotive Engineers, Australasia Telstra Corporation University of West
5、ern Australia Wireless Institute Australia Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be i
6、ssued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about joint Australian/New Zealand Standards can be found
7、 by visiting the Standards Web Shop at .au or Standards New Zealand web site at www.standards.co.nz and looking up the relevant Standard in the on-line catalogue. Alternatively, both organizations publish an annual printed Catalogue with full details of all current Standards. For more frequent listi
8、ngs or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organization. We also welcome suggestions for improvement in ou
9、r Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia or Standards New Zealand at the address shown on the back cover. This Standard was issued in draft for
10、m for comment as DR 06045. Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007AS/NZS CISPR 15:2006 Australian/New Zealand StandardLimits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Originated as AS/NZS 4051:199
11、2. Previous edition AS/NZS CISPR 15:2002. Second edition 2006. COPYRIGHT Standards Australia/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or byany means, electronic or mechanical, including photocopying, without the writtenpermission of
12、the publisher. Jointly published by Standards Australia, GPO Box 476, Sydney, NSW 2001 and StandardsNew Zealand, Private Bag 2439, Wellington 6020 ISBN 0 7337 7461 X Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007iiPREFACE This Standard was prepared by the Joint Standard
13、s Australia/Standards New Zealand Committee TE-003, Electromagnetic Interferences to supersede AS/NZS CISPR 15:2002, as one of a series of Standards intended to facilitate control of electromagnetic interference and the compatibility of electrical and electronic equipment. This Standard is identical
14、 with, and has been reproduced from CISPR 15:2005, Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. The objective of this Standard is to specify the limits and methods of test for the measurement of radio disturbance characteristics
15、 of electrical lighting and similar equipment. The frequency range covered is 9 kHz to 400 GHz. As this Standard is reproduced from an International Standard, the following applies: (a) Its number does not appear on each page of text and its identity is shown only on the cover and title page. (b) In
16、 the source text this International Standard should read this Australian/New Zealand Standard. (c) A full point should be substituted for a comma when referring to a decimal marker. (d) Any French text on figures should be ignored. References to International Standards should be replaced by referenc
17、es to Australian or Australian/New Zealand Standards, as follows: Reference to International Standard Australian/New Zealand Standard IEC AS/NZS 60050 International Electrotechnical Vocabulary (IEV) 60050.161 Chapter 161: Electromagnetic compatibility 60155 Glow-starters for fluorescent lamps 60598
18、Luminaires 60598 LuminairesGeneral requirements and tests 60598-1 Part 1: General requirements and tests 60598.1 Part 1: General requirements and tests CISPR AS/NZS CISPR 11 Industrial, scientific and medical (ISM) radio-frequency equipmentElectromagnetic disturbance characteristicsLimits and method
19、s of measurement 11 Industrial, scientific and medical (ISM) radio-frequency equipmentElectromagnetic disturbance characteristicsLimits and methods of measurement 16 Specification for radio disturbance and immunity measuring apparatus and methods 16 Specification for radio disturbance and immunity m
20、easuring apparatus and methodsAccessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007iiiCISPR AS/NZS CISPR 16-1-1 Part 1-1: Radio disturbance and immunity measuring apparatusMeasuring apparatus16.1.1 Part 1.1: Radio disturbance and immunity measuring apparatusMeasuring apparatus
21、 16-1-2 Part 1-2: Radio disturbance and immunity measuring apparatusAncillary equipment Conducted disturbances 16.1.2 Part 1.2: Radio disturbance and immunity measuring apparatusAncillary equipmentConducted disturbances 16-1-4 Part 1-4: Radio disturbance and immunity measuring apparatusAncillary equ
22、ipmentRadiated disturbances 16.1.4 Part 1.4: Radio disturbance and immunity measuring apparatusAncillary equipmentRadiated disturbances 16-2-1 Part 2-1: Methods of measurement of disturbances and immunityConducted disturbance measurements 16.2.1 Part 2.1: Methods of measurement of disturbances and i
23、mmunityConducted disturbance measurements 22 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement 22 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement The term normative has been used in this Standard to d
24、efine the application of the annex to which it applies. A normative annex is an integral part of a Standard. Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007ivCONTENTS Page CISPR 15 IEC:2005 3 CONTENTS FOREWORD.9 1 Scope.1 2 Normative references2 3 Terms and definitions .
25、2 4 Limits .3 4.1 Frequency ranges3 4.2 Insertion loss.3 4.3 Disturbance voltages .3 4.4 Radiated electromagnetic disturbances4 5 Application of the limits.5 5.1 General .5 5.2 Indoor luminaires.5 5.3 Independent auxiliaries exclusively for use with lighting equipment.6 5.4 Self-ballasted lamps 8 5.
26、5 Outdoor lighting appliances8 5.6 UV and IR radiation appliances9 5.7 Transport lighting.10 5.8 Neon and other advertising signs .11 5.9 Self-contained emergency lighting luminaires.11 5.10 Replaceable starters for fluorescent lamps.11 6 Operating conditions for lighting equipment.12 6.1 General .1
27、2 6.2 Lighting equipment 12 6.3 Supply voltage and frequency 12 6.4 Ambient conditions 12 6.5 Lamps .12 6.6 Replaceable starters13 7 Method of insertion loss measurement 13 7.1 Circuits for the measurement of insertion loss13 7.2 Measuring arrangement and procedure14 7.3 Luminaire 14 7.4 Measurement
28、 procedure 15 8 Method of measurement of disturbance voltages.16 8.1 Measuring arrangement and procedure16 8.2 Indoor and outdoor luminaires17 8.3 Independent light regulating devices 18 8.4 Independent transformers and convertors for incandescent lamps18 8.5 Independent ballasts for fluorescent and
29、 other discharge lamps .19 8.6 Self-ballasted lamps and semi-luminaires 19 8.7 UV and IR radiation appliances20 8.8 Self-contained emergency lighting luminaires.20 8.9 Independent starters and igniters for fluorescent and other discharge lamps 20 Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL
30、SUPERVIS on 05 Apr 2007vPage CISPR 15 IEC:2005 5 9 Method of measurement of radiated electromagnetic disturbances 20 9.1 Measuring arrangement and procedure20 9.2 Indoor and outdoor luminaires21 9.3 Independent convertors for incandescent lamps.21 9.4 Independent ballasts for fluorescent and other d
31、ischarge lamps .21 9.5 Self-ballasted lamps and semi-luminaires 21 9.6 UV and IR radiation appliances21 9.7 Self-contained emergency lighting luminaires.21 10 Interpretation of CISPR radio disturbance limits 21 10.1 Significance of a CISPR limit .21 10.2 Tests.22 10.3 Statistical method of evaluatio
32、n22 10.4 Banning of sales23 Annex A (normative) Electrical and constructional requirements for the low-capacitance balance-to-unbalance transformer36 Figure 1 Insertion loss measurement on linear and U-type fluorescent lamp luminaires.24 Figure 2 Insertion loss measurement on circular fluorescent la
33、mp luminaires25 Figure 3 Insertion loss measurement on luminaires for single-capped fluorescent lamps with integrated starter .26 Figure 4a Configuration of linear and U-type dummy lamps.27 Figure 4b Configuration of circular dummy lamps28 Figure 4c Dummy lamp for 15 mm fluorescent lamps .29 Figure
34、4d Dummy lamp for 15 mm single-capped fluorescent lamps .30 Figure 4e Dummy lamp for single-capped fluorescent lamps, linear-shaped, twin tube, tube diameter 12 mm.31 Figure 4f Dummy lamp for single-capped fluorescent lamps, linear-shaped, quad tube, diameter 12 mm.32 Figure 5 Measuring arrangements
35、 for an independent light regulating device, transformer or convertor33 Figure 6 Measuring arrangements for measuring a luminaire (Figure 6a), an independent ballast (Figure 6b) and a self-ballasted lamp (Figure 6c) .34 Figure 7 Conical metal housing for self-ballasted fluorescent lamps35 Figure A.1
36、 Isolation test configuration.37 Figure A.2a Balance-to-unbalance transformer circuit.38 Figure A.2b Details of transformer core construction.39 Figure A.2c Details of transformer core construction.39 Figure A.2d Construction of transformer .40 Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SU
37、PERVIS on 05 Apr 2007viPage CISPR 15 IEC:2005 7 Table 1 Minimum values of insertion loss3 Table 2a Disturbance voltage limits at mains terminals .3 Table 2b Disturbance voltage limits at load terminals4 Table 2c Disturbance voltage limits at control terminals 4 Table 3 Radiated electromagnetic distu
38、rbance limits.5 Table 4 Sample size and corresponding k factor in a non-central t-distribution 22 Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 20071AUSTRALIAN/NEW ZEALAND STANDARD Limits and methods of measurement of radio disturbance characteristics of electrical lighting
39、 and similar equipment CISPR 15 IEC:2005 13 LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT 1 Scope This standard applies to the emission (radiated and conducted) of radiofrequency disturbances from: all lighting equipment with a pr
40、imary function of generating and/or distributing light intended for illumination purposes, and intended either for connection to the low voltage electricity supply or for battery operation; the lighting part of multi-function equipment where one of the primary functions of this is illumination; inde
41、pendent auxiliaries exclusively for use with lighting equipment; UV and IR radiation equipment; neon advertising signs; street/flood lighting intended for outdoor use; transport lighting (installed in buses and trains). Excluded from the scope of this standard are: lighting equipment operating in th
42、e ISM frequency bands (as defined in Resolution 63 (1979) of the ITU Radio Regulation); lighting equipment for aircraft and airports; apparatus for which the electromagnetic compatibility requirements in the radio-frequency range are explicitly formulated in other IEC or CISPR standards. NOTE Exampl
43、es are: built-in lighting devices in other equipment, for example scale illumination or neon devices; photocopiers; slide projectors; lighting equipment for road vehicles. The frequency range covered is 9 kHz to 400 GHz. Multi-function equipment which is subjected simultaneously to different clauses
44、 of this standard and/or other standards shall meet the provisions of each clause/standard with the relevant functions in operation. The limits in this standard have been determined on a probabilistic basis to keep the suppression of disturbances within economically reasonable limits while still ach
45、ieving an adequate level of radio protection and electromagnetic compatibility. In exceptional cases, additional provisions may be required. Accessed by ISONET - CHINA STATE BUREAU OF TECHNICAL SUPERVIS on 05 Apr 2007CISPR 15 IEC:2005 15 2 Normative references The following referenced documents are
46、indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050(161):1990, International Electrotechnical Vocabulary (IEV) Chapter 161: Electr
47、omagnetic compatibility IEC 60155:1993, Glow-starters for fluorescent lamps IEC 60598-1:2003, Luminaires Part 1: General requirements and tests CISPR 11:2003, Industrial, scientific and medical (ISM) radio-frequency equipment Electro-magnetic disturbance characteristics Limits and methods of measure
48、ment CISPR 16-1-1:2003, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus Measuring apparatus CISPR 16-1-2:2003, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radi
49、o disturbance and immunity measuring apparatus Ancillary equipment Conducted disturbances CISPR 16-1-4:2003, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment - Radiated disturbances CISPR 16-2-1:2003, Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods
