1、ASD STANDARD NORME ASD ASD NORM prEN 3745-601 Edition P 1 September 2006 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.org ICS: 49.060 Descriptors: ENGLISH VERSION
2、 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density Srie arospatiale Fibres et cbles optiques usage aronautique Mthodes dessais Partie 601 : Densit de fume Luft- und Raumfahrt Faseroptische Leitungen fr Luftfahrzeuge Prfverfahren Teil 601: Rauchdichte This
3、 “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Do
4、main following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agre
5、ement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a nat
6、ional standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 September 2006 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2006 by ASD-STAN prEN 3745-601:20062 Contents Page Fore
7、word . 2 1 Scope 3 2 Normative references 3 3 Method 3 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has
8、 received approval for Publication. prEN 3745-601:20063 1 Scope This test method is intended for use in determining the concentration of specific gas components of smoke released by cable insulation materials. It shall be used together with EN 3745-100. 2 Normative references The following reference
9、d documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3745-100, Aerospace series Fibres and cables, optical, aircraft use T
10、est methods Part 100: General. 1) EN 3475-601, Aerospace series Cables, electrical, aircraft use Test methods Part 601: Smoke density. 2) 3 Method The method is in accordance with EN 3475-601 - Smoke density. 1) In preparation at the date of publication of this standard.2) Published as ASD Prestandard at the date of publication of this standard.
