1、Designation: D633 11 (Reapproved 2016)Standard Volume Correction Table forRoad Tar1This standard is issued under the fixed designation D633; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in par
2、entheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.1. Scope1.1 This table (Table 1) has been prepared by the NationalInstitut
3、e of Standards and Technology to meet a demand fromthe tar industry for a short and convenient table for reducingvolumes of road tar to the basis of 60F (15.6C) when extremeaccuracy is not required. The table shows the volume occupiedat 60F (15.6C) by a quantity of material occupying unitvolume at t
4、he indicated temperature.1.2 UnitsThe values stated in inch-pound units are to beregarded as the standard. The values given in2. Referenced Documents2.1 ASTM Standards:2D490 Specification for Road Tar3. Significance and Use3.1 Tars change in volume with changes in temperature.They are loaded or tran
5、sferred at widely varying temperatures.Volume correction factors are used to adjust bulk volumesmeasured at those temperatures with corresponding volumes ata base temperature of either 60F or 15.6C for the purposes ofcustody transfer and accounting operations.3.2 Correction factors as provided in th
6、is table have provento be sufficiently accurate for the intended purposes.3.3 The coefficient of expansion for Specification D490Type RT-12 at 60F (15.6C) per degree F is 0.00030.1This standard is under the jurisdiction of ASTM Committee D04 on Road andPaving Materials and is the direct responsibili
7、ty of Subcommittee D04.43 onSpecifications and Test for Tar and Tar Products.Current edition approved July 1, 2016. Published August 2016. Originallyapproved in 1941. Last previous edition approved in 2011 as D633 11. DOI:10.1520/D0633-11R16.2For referenced ASTM standards, visit the ASTM website, ww
8、w.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1TABLE
9、1VolumeCorrectionTableforTarLegend:t=observedtemperatureindegreesFahrenheit;tc=observedtemperatureindegreesCelcius;M=multiplierforreducingvolumestothebasisof60(15.6C)ttcMttcMttcMttcMttcMttcMttcMttcM017.781.0183351.671.00767021.110.997010540.560.986714060.000.976617579.440.965721098.8909589245118.330
10、.9474117.221.0180362.221.00737121.670.996710641.110.986414160.560.976317680.000.966421199.440.9567246118.890.9471216.671.0177372.781.00707222.220.996410741.670.986114261.110.976017780.560.9661212100.000.9564247119.440.9469316.111.0174383.331.00677322.780.996110842.220.985814361.670.975717881.110.965
11、8213100.560.9561248120.000.9466415.561.0171393.891.00647423.330.995810942.780.985514462.220.975417981.670.9655214101.110.9558249120.560.9463515.001.0168404.441.00607523.890.995511043.330.985214562.780.975118082.220.9553215101.670.9556614.441.0165415.001.00577624.440.995211143.890.984914663.330.97481
12、8182.780.9650216102.220.9553713.891.0162425.561.00547725.000.994911244.440.984614763.890.974618283.330.9647217102.780.9550813.331.0158436.111.00517825.560.994611345.000.984314864.440.974318383.890.9644218103.330.9547912.781.0155446.671.00487926.110.994311445.560.984114965.000.974018484.440.964121910
13、3.890.95451012.221.0152457.221.00458026.670.994011546.110.983815065.560.973718585.000.9639220104.440.95421111.671.0149467.781.00428127.220.993711646.670.983515166.110.973418685.560.9636221105.000.95391211.111.0146478.331.00398227.780.993411747.220.983215266.870.973118786.110.9633222105.560.95371310.
14、561.0143488.891.00368328.330.993111847.780.982915367.220.972918886.670.9630223106.110.95341410.001.0140499.441.00338428.890.992911948.330.982615467.780.972618987.220.9627224106.670.9531159.441.01375010.001.00308529.440.992612048.890.982315568.330.972319087.780.9625225107.220.9528168.891.01345110.581
15、.00278630.000.992312149.440.982015668.890.972019188.330.9622226107.780.9526178.331.01315211.111.00248730.560.992012250.000.981715769.440.971719288.890.9619227108.330.9523187.781.01285311.671.00218831.110.991712350.580.981515870.000.971419389.440.9616228108.890.9520197.221.01255412.221.00188931.670.9
16、91412451.110.981215970.560.971219490.000.9614229109.440.9517206.671.01215512.781.00159032.220.991112551.670.980916071.110.970919590.560.9611230110.000.9515216.111.01185613.331.00129132.780.990812652.220.980616171.670.970619691.110.9608231110.560.9512225.561.01155713.891.00099233.330.990512752.780.98
17、0316272.220.970319791.670.9605232111.110.9509235.001.01125814.441.00069333.890.990212853.330.980016372.780.970019892.220.9602233111.670.9507244.441.01095915.001.00039434.440.989912953.890.979716473.330.969719992.760.9600234112.220.9504253.891.01066015.561.00009535.000.989613054.440.979416573.890.969
18、520093.330.9597235112.780.9501263.331.01036116.110.99979635.560.989313155.000.979116674.440.969220193.890.9594236113.330.9498272.781.01006216.670.99949736.110.989013255.560.978916775.000.968920294.440.9591237113.890.9496282.221.00976317.220.99919836.670.988713356.110.978616875.560.968620395.000.9589
19、238114.440.9493291.671.00946417.780.99889937.220.988413456.670.978316976.110.968320495.560.9586239115.000.9490301.111.00916518.330.998510037.780.988113557.220.978017076.670.968120596.110.9583240115.560.9488310.561.00886618.890.998210138.330.987813657.780.977717177.220.967820696.670.9580241116.110.94
20、853201.00856719.440.997910238.890.987613758.330.977417277.780.967520797.220.9578242116.670.9482330.561.00826820.000.997610339.440.987313858.890.977117378.330.967220897.780.9575243117.220.9480341.111.00796920.560.997310440.000.987013959.440.976817478.890.966920998.330.9572244117.780.9477D633 11 (2016
21、)2ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, a
22、re entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional stand
23、ardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Commi
24、ttee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 11 (2016)3
