1、Designation: E 2083 05Standard Classification forBuilding Construction Field Requirements, and OfficeOverhead the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of
2、last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This standard covers a classification for field require-ments, office overhead, and profit for use in constructionestimating. This classification is common to all forms ofconstru
3、ction, and its components are an integral part of anyconstruction cost estimate. The classification serves as aconsistent reference for analysis, evaluation, and monitoringduring the feasibility, planning, design, and constructionphases of building. Used in conjunction with UNIFORMAT IIand other ele
4、mental classifications, including ClassificationE 2168, it also ensures consistency in the economic evaluationof construction work across time and from project to project.Through consistency in estimating and cost recording it en-hances reporting at all stages in constructionfrom feasibilityand plan
5、ning through the preparation of working documents,construction, maintenance, rehabilitation, and disposaland isa necessary part of the reporting process described in PracticeE 1804.1.2 This classification applies to all construction work.1.3 This classification is not based on permanent physicalelem
6、ents of construction (as defined and classified in Classifi-cation E 1557). Rather, the classification items are major,non-permanent, cost components common to all constructionwork. They perform the same function and provide for similarneeds regardless of the design, specification, constructionmetho
7、d, or materials used in the physical construction.2. Referenced Documents2.1 ASTM Standards:2E 833 Terminology of Building EconomicsE 1557 Standard Classification for Building Elements andRelated Sitework - UNIFORMAT IIE 1804 Practice for Performing and Reporting Cost Analy-sis During the Design Pha
8、se of the ProjectE 2168 Classification for Allowance, Contingency, and Re-serve Sums in Building Construction3. Terminology3.1 DefinitionsFor definitions of terms used in this clas-sification, refer to Terminology E 833.4. Significance and Use4.1 This classification defines an integral part of any c
9、on-struction estimate and cost record. It classifies the non-permanent portion of construction activity that is essential toallow physical implementation of the required work to takeplace.4.2 Used in conjunction with UNIFORMAT II, this classi-fication provides for consistent and complete estimating
10、ofbuilding construction work, especially during the design phase.The same considerations of consistent use and commonality toall work have been applied here.4.3 This classification is sufficiently generic to allow its usein estimating all forms of construction work and through allstages of planning,
11、 design, use, and disposal. Additionally, it isappropriate for use in both elemental estimates and tradeestimates.5. Basis of Classification5.1 All parts of the built environment are included.5.2 Criteria for the ClassificationThe selected classifica-tion, the items to include within it, and within
12、which parts ofthe classification to include them are based on the followingcriteria:5.2.1 Applies to any construction type and shall not includephysical elements of construction such as those defined inClassification E 1557 and other elemental classifications.5.2.2 Includes only items of a construct
13、ion enabling, man-agement, supervision, jurisdictional, financial, legal, liability,and client requirement nature necessary to the performance ofthe construction work.5.2.3 Includes specifically those items of cost that bycommon understanding and usage are normally borne by ageneral contractor or co
14、nstruction manager, and any other1This classification is under the jurisdiction of ASTM Committee E06 onPerformance of Buildings and is the direct responsibility of Subcommittee E06.81on Building Economics.Current edition approved May 1, 2005. Published May 2005. Originallyapproved in 2000. Last pre
15、vious edition approved in 2000 as E 2083 00.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM I
16、nternational, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.items required by terms of contract and normally specifiedwithin the general requirements and general conditions ofcontract.5.2.4 Includes items with significant influence on cost and ahigh frequency of
17、 occurrence. Categories are defined in orderto provide a framework for cost control. The decision as towhere among the classification elements to include specificitems will ultimately rely on professional judgment as to whereprofessionals in current practice normally look for such items.6. Descripti
18、on of Field Requirements IndividualClassification6.1 Classification of Field RequirementsTable 1 presentsthe classification of field requirements. Comprising threehierarchical levels: Major Group Classification for Level 1,Group Classification for Level 2, and Individual Classificationsfor Level 3.6
19、.2 The following lists show what items are included in therecommended classification at Level 3. Note that the listings ofinclusions are not intended to be an exhaustive listing. Rather,they provide a general outline of what to expect in thisindividual element consistent with the selection criteria
20、out-lined in 5.2.6.3 Field Requirements (X 10)6.3.1 Bonds, Permits, Fees, and Insurances (X 10005)Includes:6.3.1.1 building permit,6.3.1.2 fire district permit,6.3.1.3 miscellaneous permits: street use, curb cuts, side-walk use, parking meter use,6.3.1.4 utility connections: water, storm sewer, sani
21、tarysewer, electric, gas, fire protection, others,6.3.1.5 bonds: bid bond, performance bond, payment bond,lien bond, maintenance bond, retainage bond, special bonds,6.3.1.6 insurance: public liability, builders risk, all-risk,hold harmless.Excludes:6.3.1.7 Permanent work included elsewhere within th
22、ephysical elements of construction.6.3.2 Field/Site Set-Up and Accommodation (X 1010)Includes:6.3.2.1 Access to site: temporary roads, storage, lay downand parking areas, traffic control,6.3.2.2 Site setup: move in and out, mobilization, set-up,construction signs,6.3.2.3 Site accommodations(1) tempo
23、rary buildings: offices, storage sheds, first aid,lunch room,(2) temporary labor camp: dormitories, kitchens, laundry,store, entertainment, temporary toilets and sanitary facilities,lighting, power, heating, ventilation and cooling,(3) telephone, facsimile, and data: service and monthlycharges,(4) c
24、ommunication system: service and monthly charges,(5) computer and copy equipment: purchase, rental, usage,and maintenance,(6) stationery, copy/printing cost,(7) office and first aid supplies.Excludes:6.3.2.4 Protection, barricades, enclosures (See 6.3.5 Safetyand Protection (X 1025)6.3.3 Management,
25、 Supervision and Field Engineering (X1015)Includes:TABLE 1 Classification of Field Requirements, and Office Overhead and Profit, with Alpha-Numerical DesignationsLevel 1Major Group ClassificationLevel 2Group ClassificationLevel 3Individual ClassificationX Field Requirements and Overhead classificati
26、on; construction ele-ment; construction estimating; construction field requirements;cost control; cost estimating; cost planning; elemental estimate;elemental format; general accounts; general conditions; generalrequirements; overhead; profit; trade estimate; UNIFORMATIIASTM International takes no p
27、osition respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsib
28、ility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to
29、ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the addre
30、ss shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).E2083054
