1、BRITISH STANDARD BS7313-1.3: 1990 ISO8549-3: 1989 Prosthetics and orthotics Part1: Terminology Section1.3 Glossary of terms relating to external orthosesBS7313-1.3:1990 This British Standard, having been prepared under the directionof the Health Care Standards Policy Committee, waspublished under th
2、e authorityof the Board of BSI andcomes into effect on 29June1990 BSI08-1999 The following BSI references relate to the work on this standard: Committee reference HCC/9 Draft for comment86/55509DC ISBN 0 580 18503 6 Committees responsible for this British Standard The preparation of this British Sta
3、ndard was entrusted by the Health Care Standards Policy Committee (HCC/-) to Technical Committee HCC/9, upon which the following bodies were represented: British Institute of Surgical Technologists British Investment Casting Trade Association British Limbless Ex-Service Mens Association British Medi
4、cal Association British Narrow Fabrics Association British Orthopaedic Association British Retailers Association British Surgical Trades Association Chartered Society of Physiotherapy College of Occupational Therapists Consumer Policy Committee of BSI Department of Health Disablement Services Author
5、ity International Society for Prosthetics and Orthotics (United Kingdom National Society) Knitting Industries Federation Ltd. Malaysian Rubber Producers Research Association Man-made Fibres Producers Committee Ministry of Defence National Association of Medical and Surgical Appliance Officers Nation
6、al Centre for Training and Education in Prosthetics and Orthotics Opportunities for the Disabled Orthotic and Prosthetic Training and Education Council (OPTEC) Royal College of Nursing and National Council for Nurses of the UnitedKingdom Royal College of Physicians and Surgeons of Glasgow Royal Coll
7、ege of Surgeons of Edinburgh Royal College of Surgeons of England SATRA Footwear Technology Centre Scottish Home and Health Department Scottish Office Society of Chiropodists Surgical Appliance Manufacturers Association Vascular Surgical Society of GB Amendments issued since publication Amd. No. Dat
8、e CommentsBS7313-1.3:1990 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Terms, abbreviations and definitions 1 3 Alphabetical list of abbreviations in English 3 Alphabetical indexes English 4 French 5 Publication referred to Inside back coverB
9、S7313-1.3:1990 ii BSI 08-1999 National foreword This Section of BS7313 has been prepared under the direction of the Health Care Standards Policy Committee. It is identical with ISO8549-3:1989 “Prosthetics and orthotics Vocabulary Part3: Terms relating to external orthoses” published by the Internati
10、onal Organization for Standardization (ISO). Other Parts and Sections of BS7313 include: Section1.1: Glossary of general terms relating to external limb prostheses and external orthoses; Section1.2: Glossary of terms relating to external limb prostheses and wearers of external limb prostheses; Part2
11、: Method of describing limb deficiencies present at birth; Part3: Method of describing lower limb amputation stumps 1) ; Part4: Method of describing upper limb amputation stumps 1) . A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards
12、 are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to6, an inside back cover and a back cover. This standard
13、has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. 1) In preparation. Cross-reference International Standard Corresponding British Standard ISO8549-1:1989 BS7313: Prosthetics and orthotics Section1.
14、1:1990 Glossary of general terms relating to external limb prostheses and external orthoses (Identical)BS7313-1.3:1990 BSI 08-1999 1BS7313-1.3:1990 2 BSI 08-1999BS7313-1.3:1990 BSI 08-1999 3BS7313-1.3:1990 4 BSI 08-1999BS7313-1.3:1990 BSI 08-1999 56 blankBS7313-1.3:1990 BSI 08-1999 Publication refer
15、red to See national foreword.BS7313-1.3: 1990 ISO8549-3: 1989 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is
16、incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if a
17、nyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS w
18、hich ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, i
19、t is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Export
20、ers Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discou
21、nts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization
22、 bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the
23、free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
