BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf

上传人:sofeeling205 文档编号:550638 上传时间:2018-12-09 格式:PDF 页数:10 大小:326.94KB
下载 相关 举报
BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf_第1页
第1页 / 共10页
BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf_第2页
第2页 / 共10页
BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf_第3页
第3页 / 共10页
BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf_第4页
第4页 / 共10页
BS EN 3341-2005 Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0 4 mm a 6 mm《铝合金AL-P6061-T4或T42 薄板和带材 0 4 mm≤a≤6 mm》.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g580,4 mm ka k6 mmThe European Standard EN 3341:2005 has the status of a British StandardICS 49.025.20

2、Aluminium alloy AL-P6061-T4 or T42 Sheet and strip BRITISH STANDARD AEROSPACE SERIESBS EN 3341:2005BS EN 3341:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 7 October 2005 BSI 7 October 2005ISBN 0 580 46354 0Cross-referencesThe British S

3、tandards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.T

4、his publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside fron

5、t cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this subcommittee can be obt

6、ained on request to its secretary.enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standard is the official English language version of EN 3341

7、:2005.The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Subcommittee ACE/61/-/24, Light alloys, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European co

8、mmittee any EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3341 June 2005 ICS 49.025.20 English version Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm Srie arospatiale - Alliage daluminium AL-P6061-T4 ou T42 - Tles et bandes - 0,4 mm a 6 mm Luft- und Ra

9、umfahrt - Aluminiumlegierung AL-P6061-T4 oder T42 - Bleche und Bnder - 0,4 mm a 6 mm This European Standard was approved by CEN on 22 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

10、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version

11、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia,

12、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITE

13、E FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3341:2005: E2 Foreword This document (EN 3341:2005) has been prepared by the European Association of Aerospace

14、 Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. Th

15、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest by December 2005. Attention is drawn to the possibility that some o

16、f the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impleme

17、nt this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdo

18、m. EN 3341:20053 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2. 1 Scope This standard specifies the requireme

19、nts relating to: Aluminium alloy AL-P6061- T4 or T42 Sheet and strip 0,4 mm a 6 mm for aerospace application. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references

20、, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4400-2, Aerospace series Aluminium and aluminium alloy wrought products Techn

21、ical specification Part 2: Sheet and strip. 1)EN 4500-2, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys. 1) 1) Published as AECMA Prestandard at the date of publication of this

22、standard. EN 3341:20054 1 Material designation Aluminium alloy AL-P6061- Others Element Si Fe Cu Mn Mg Cr Zn Ti Each Total Al min. 0,40 0,15 0,8 0,04 2 Chemical composition % max. 0,8 0,7 0,40 0,15 1,2 0,35 0,25 0,15 0,05 0,15 Base 3 Method of melting 4.1 Form Sheet and strip 4.2 Method of productio

23、n Rolled 4.3 Limit dimension(s) mm 0,4 a 6 5 Technical specification EN 4400-2 Delivery condition F O H111 T4 6.1 Heat treatment 520 C 540 C / WQ 40 C + = ambient / t 5 d 6.2 Delivery condition code F A a U Use condition T42 T4 7 Heat treatment Delivery condition + 520 C 540 C / WQ 40 C + = ambient

24、/ t 5 d Delivery condition Characteristics 8.1 Test sample(s) See EN 4400-2. 8.2 Test piece(s) See EN 4400-2. 8.3 Heat treatment Delivery condition: O or H111 Use condition: T4 or T42 9 Dimensions concerned mm 0,4 a 3,0 3,0 a 6 0,4 a 0,8 0,8 a 6 10 Thickness of cladding on each face % 11 Direction o

25、f test piece LT LT LT LT12 Temperature C Ambient Ambient Ambient Ambient 13 Proof stress Rp0,2MPa 85 85 110 110 14 Strength RmMPa 150 150 210 210 15 Elongation A % A50mm 16 A50mm 18 A50mm 14 A50mm 16 16 T Reduction of area Z % 17 Hardness 18 Shear strength RcMPa 19 Bending k 1, = 180 1, = 180 20 Imp

26、act strength 21 Temperature 22 Time h 23 Stress aMPa 24 Elongation a % 25 Rupture stress RMPa 26 C Elongation at rupture A % 27 Notes (see line 98) aEN 3341:20055 44 External defects See EN 4400-2. 82 Batch uniformity See EN 4400-2. 5 T4 60 (Typical value) 7Hardness HB 16 per product 24 per batch 95

27、 Marking inspection See EN 4400-2. 96 Dimensional inspection See EN 4400-2. 98 Notes aWhen the delivery condition is H111, this shall be specified on the order and marked on the product, in place of the delivery condition code. 99 Typical use EN 3341:20056 100 Product qualification See EN 4400-2. Qu

28、alification programme to be agreed between manufacturer and purchaser. EN 3341:2005blankBS EN BSI389 Chiswick High RoadLondonW4 4AL3341:2005BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europ

29、e and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products

30、and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI of

31、fers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax:

32、+44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Informat

33、ion on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the

34、Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administ

35、ration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists i

36、n all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any mean

37、s electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1