1、BRITISH STANDARDBS EN 3375-006:2006Aerospace series Cable, electrical, for digital data transmission Part 006: Single braid 78 Ohms Type XM Product standardThe European Standard EN 3375-006:2006 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g5
2、4g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 3375-006:2006This British Standard was published under the aut
3、hority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978 0 580 50089 3National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3375-006:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aero
4、space avionic electrical and fibre optic technology, to Panel ACE/6/-/2, Aerospace Cables.A list of organizations represented on ACE/6/-/2 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
5、s correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN
6、 3375-006December 2006ICS 49.060English VersionAerospace series - Cable, electrical, for digital data transmission- Part 006: Single braid - 78 Ohms - Type XM - Product standardSrie arospatiale - Cbles lectriques pour transmissionde donnes numriques - Partie 006 : Simple tresse - 78Ohms - Type XM -
7、Norme de produitLuft- und Raumfahrt - Elektrische Leitungen frDigitaldatenbertragungen - Teil 006: Einzel geschirmt - 78Ohms - Type XM - ProduktnormThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t
8、he conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in t
9、hree official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Aus
10、tria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR ST
11、ANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-006:2006: ELicensed Copy: Wang Bin, na, Thu Apr
12、 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics.4 5 Tests6 6 Quality assurance9 7 Identification and marking (according to EN 3375-002 and TR 6058) 9 8 Packaging .10 9 Technical
13、specification .10 EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3 Foreword This document (EN 3375-006:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and v
14、otes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard,
15、 either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/o
16、r CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
17、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 G
18、MT+00:00 2007, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the required characteristics of single braid, 78 Ohms, size 24 electrical cable type XM, intended for digital data transmissions. Main electrical characteristics are given in 4.3. It shall be used together with EN 3375-001 an
19、d EN 3375-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Ae
20、rospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2084, Aerospace series Cables, electric, single-core, general purpose, with conductors in copper or copper alloy Technical specification. EN 2235, Aerospace series Single and multicore electrical cables, scre
21、ened and jacketed Technical specification. EN 3375-001, Aerospace series Cable, electrical, for digital data transmission Technical specification.1) EN 3375-002, Aerospace series Cable, electrical, for digital data transmission General. 1)EN 3475-100*, Aerospace series Cables, electrical, aircraft u
22、se Test methods Part 100: General. EN 9133, Aerospace series Quality management systems Qualification Procedure for aerospace standard parts. TR 6058, Aerospace series Cable code and identification list. 2)3 Terms and definitions For the purposes of this standard, the terms and definitions given in
23、EN 3475-100 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. *And all parts quoted in this standard. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of this standard. EN 33
24、75-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI5 Key c Two cores size 24 Nickel plated copper alloy d Insulation of elements: Fluorocarbon (colour: see 7.5) e Braid screening, overlap 65 % minimum, nickel-plated copper strands (strands = 0,08 mm
25、) f First tape: polyimide g Polyimide without external coating (colour: see 7.5) Figure 1 Table 1 Core (AECMA EN 2083) Insulator Sheath external Mass diameter diameter diameter Composition min. max. min. max. max. max. N mm mm mm mm g/m19 0,12 0,55 0,62 1,13 1,33 3,10 15 4.2 General characteristics
26、(according to EN 2235 and EN 3475-100) Operating temperature . : 55 C to 200 C (ambient + heating) ENXM2423451EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI6 Minimum static bend radius . : R = 25 mm Resistance to environment: Resistant to
27、fluids : as per EN 3475-411 Non flammable . : as per EN 3475-407 Twisting pitch ranging between 8 and 16 times the external diameter of the dual-conductor assembly. 4.3 Electrical characteristics Impedance : (78 7) from 1 MHz to 200 MHz Capacitance : 64 pF/m 10 % Attenuation maximum . : 0,035 dB/m a
28、t 1 MHz 0,15 dB/m at 10 MHz For information: maximum voltage rating 250 V AC 5 Tests According to EN 3375-001 and EN 3475-100. See Table 2. Table 2 Carried out on EN 3475- Designation of the test Component aCable 201 Visual examination Applicable Applicable 202 Mass Not applicable Applicable 15 kg/k
29、m 203 Dimensions Applicable Applicable 301 Ohmic resistance per unit length Not applicable Applicable 117 /km maximum 302 Voltage proof test Not applicable Applicable Elements: 1 500 V AC Jacket: Dry: 1 000 V AC Immersion: 500 V AC 303 Insulation resistance Not applicable Applicable 1 500 M km at 20
30、 C 304 Surface resistance Applicable Applicable 1 250 M.mm 305 Overload resistance Not applicable Not applicable continued EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI7 Table 2 (continued) Carried out on EN 3475- Designation of the test
31、Component aCable 306 Continuity of conductors Applicable Applicable 307 Corona extinction voltage Not applicable Not applicable 401 Accelerated ageing Not applicable Applicable T = operating Temperature 30 C 168 h Mandrel 50 mm Load = 0,7 daN 402 Shrinkage and delamination Applicable T C = (200 5) C
32、0,8 mm max. Applicable T C = (200 5) C 2 mm max. 403 Delamination and blocking Not applicable Applicable T C = 200 C Mandrel 50 mm 404 Thermal shock Applicable T C = (200 5) C0,8 mm max. Applicable T C = (200 5) C 2 mm max. 405 Bending at ambient temperature Not applicable Applicable Load = 0,7 daN
33、Mandrel 50 mm 406 Cold bend test Not applicable Applicable Load = 0,7 daN Mandrel 50 mm 407 Flammability Not applicable Applicable Load = 1 daN 408 Fire resistance Not applicable Not applicable 409 Air-excluded ageing Not applicable Not applicable 410 Thermal endurance Not applicable Not applicable
34、411 Resistance to fluids Not applicable Applicable 412 Humidity resistance Not applicable Not applicable 413 Wrap back test Not applicable Not applicable 414 Differential scanning calorimeter (DSC test) Not applicable Not applicable 415 Rapid change of temperature Not applicable Not applicable 416 T
35、hermal stability Not applicable Not applicable 417 Fire resistance inside harness Not applicable Not applicable 418 Conductor thermal endurance Not applicable Not applicable 501 Dynamic cut-through Not applicable Applicable at 23 C: 1,0 daN at 200 C: 0,5 daN continued EN 3375-006:2006Licensed Copy:
36、Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI8 Table 2 (continued) Carried out on EN 3475- Designation of the test Component a Cable 502 Notch propagation Not applicable Applicable Notch = 0,05 mm Mandrel 50 mm 503 Scrape abrasion Not applicable Applicable F = 1 daN 50
37、4 Torsion Not applicable Not applicable 505 Tensile test on conductors and strands Applicable Not applicable 506 Plating continuity Applicable Applicable 507 Adherence of plating Applicable Applicable 508 Plating thickness Applicable Applicable 509 Solderability Not applicable Not applicable 510 Ten
38、sile strength and elongation of extruded insulation, sheath and jacket material Not applicable Not applicable 511 Cable-to-cable abrasion Not applicable Not applicable 512 Flexure endurance Not applicable Not applicable 513 Deformation resistance (Installation with plastic cable ties) Not applicable
39、 Not applicable 514 Porosity of copper cladding Not applicable Not applicable 601 Smoke density Not applicable Applicable 602 Toxicity Not applicable Applicable 603 Resistance to wet arc tracking Not applicable Not applicable 604 Resistance to dry arc propagation Not applicable Not applicable 605 We
40、t short circuit test Not applicable Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 0,25 daN Applicable 702 Screen pushback capability Not applicable Applicable 703 Permanence of manufacturers marking Not applicable Applicable 704 Flexibility Not applicable N
41、ot applicable 705 Contrast measurement Not applicable Not applicable 706 Laser markability Not applicable Not applicable 801 Capacitance per unit length Not applicable Mutual capacitance See 4.3. 802 Capacitance unbalance Not applicable Applicable 5 % 803 Capacitance variation Not applicable Not app
42、licable 804 Velocity of propagation Not applicable Not applicable continued EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSI9 Table 2 (concluded) Carried out on EN 3475- Designation of the test Component a Cable 805 Characteristic impedance
43、Not applicable Applicable Differential impedance See 4.3. 806 Attenuation Not applicable Applicable See 4.3. 807 Transfer impedance Not applicable Not applicable 808 Cross-talk Not applicable Not applicable 809 Resistance unbalance (DC) Not applicable Not applicable 810 Structural return loss Not ap
44、plicable Not applicable 811 Unbalance attenuation Not applicable Not applicable aSamples from finished cable. 6 Quality assurance See EN 9133. 7 Identification and marking (according to EN 3375-002 and TR 6058) 7.1 Designation EXAMPLE Description block ELECTRICAL CABLE Identity block EN3375-006D02 R
45、eference of this standard Nature of braid (D: Nickel plated copper) Jacket marking code (see Table 3) 7.2 Short designation See Table 3. Table 3 Braid code Jacket code Short designation D none XM 24 D 01 XM R 24 D 02 XM B 24 EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00
46、2007, Uncontrolled Copy, (c) BSI10 7.3 Marking EXAMPLE EN XM R 24 FRF 05 7.4 Colour of the marking on the jacket Code “none“: Green or Black (standard); Code 01: Red (main line); Code 02: Blue (branch line). 7.5 Colour of components Cores: 1 red + 1 light blue; Jacket: natural. 8 Packaging See EN 33
47、75-001. 9 Technical specification See EN 2084. See EN 2235. See EN 3375-001. EN 3375-006:2006Licensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Thu Apr 05 06:44:20 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 3375-006:2006B
48、SI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are upd
49、ated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front
