1、BRITISH STANDARD AEROSPACE SERIES BS EN 3841-511:2004 Circuit breakers Test methods Part 511: Combined test: temperature, altitude and vibration The European Standard EN 3841-511:2004 has the status of a British Standard ICS 49.060 BS EN 3841-511:2004 This British Standard was published under the au
2、thority of the Standards Policy and Strategy Committee on 24 February 2005 BSI 24 February 2005 ISBN 0 580 45547 5 National foreword This British Standard is the official English language version of EN 3841-511:2004. The UK participation in its preparation was entrusted by Technical Committee ACE/6,
3、 Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/5, Circuit breakers, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement internati
4、onal or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport
5、to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on
6、 the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. Th
7、e BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3841511 December2004 ICS49.060 Englishversion AerospaceseriesCircuitbreakersTestmethodsPart511: Co
8、mbinedtest:temperature,altitudeandvibration SriearospatialeDisjoncteursMthodesdessais Partie511:Essaicombin:temprature,altitudeet vibrations LuftundRaumfahrtSchutzschalterPrfverfahrenTeil 511:KombinierterVersuch:Temperatur,Hheund Schwingung ThisEuropeanStandardwasapprovedbyCENon10September2004. CENm
9、embersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENm
10、ember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria
11、,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATIO
12、N EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3841511:2004:EEN 3841-511:2004 (E) 2 Contents Page 1 Scope 4 2 Normative references 4 3 Method 4 EN 3841-511:2004 (E) 3
13、Foreword This document (EN 3841-511:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associati
14、ons and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shal
15、l be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, H
16、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 3841-511:2004 (E) 4 1 Scope This standard specifies a method for a combined test of temperature, altitude and vibration
17、of circuit breakers. It shall be used together with EN 3841-100. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume
18、nt (including any amendments) applies. EN 3841-100, Aerospace series Circuit breakers Test methods Part 100: General EN 3841-506, Aerospace series Circuit breakers Test methods Part 506: Vibration performance 3 Method 3.1 Mounting The circuit breakers shall be mounted in a test chamber on the vibrat
19、or according to 4.2 and 4.3 in EN 3841-100. The means of mounting shall be designed so as to transmit vibrations over the whole frequency range without absorption or natural resonance. An example of an apparatus is given in Figure 1. The electrical connection shall be made with the cables of the sec
20、tions specified in EN 3841-100, Table 1. The connection cables shall be attached to the vibration support approximately 100 mm from the terminals. The circuit breakers and the cables shall be mounted with the torque indicated in the product standard. EN 3841-511:2004 (E) 5 Key 1 Acceleration control
21、 6 Circuit breaker test chamber 2 Temperature control 7 Circuit breaker 3 Pressure generator and control 8 Circuit breaker support 4 Electrical cables 9 Temperature test chamber (fixed) 5 Flexible seal 10 Vibrator Figure 1 3.2 Procedure The circuit breakers shall be subjected to a load in accordance
22、 with the values specified in the technical specification, until thermal stabilization. The temperature and the pressure in the circuit breakers test chamber shall be stabilized, and maintained at the values specified in the technical specification. NOTE The temperature shall be measured at the lowe
23、r and the upper level of the test chamber, and the difference shall be 10 C maximum. The tolerance for pressure shall be 3 %. The circuit breakers shall be subjected to the vibration test according to 3.2 in EN 3841-506, at the values specified in the technical specification. 3.3 Requirement Require
24、ments in accordance with technical specification and product standard. BS EN 3841-511:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and a
25、t the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and
26、services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offer
27、s members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +
28、44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Informa
29、tion on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact th
30、e Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Admin
31、istration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyri
32、ght subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form
33、or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
