BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf

上传人:feelhesitate105 文档编号:571069 上传时间:2018-12-13 格式:PDF 页数:16 大小:160.53KB
下载 相关 举报
BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf_第1页
第1页 / 共16页
BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf_第2页
第2页 / 共16页
BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf_第3页
第3页 / 共16页
BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf_第4页
第4页 / 共16页
BS EN 13085-2001 Wallcoverings Specification for cork rolls《墙面饰层 软木辊规范》.pdf_第5页
第5页 / 共16页
点击查看更多>>
资源描述

1、BRITISH STANDARD BS EN 13085:2001 Incorporating Corrigendum No.1 Wallcoverings Specification for cork rolls The European Standard EN 13085:2001 has the status of a British Standard ICS 79.100; 91.180 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 13085:2001 This British

2、Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 04-2001 ISBN 0 580 37004 6 National foreword This British Standard is the official Englis

3、h language version of EN 13085:2001. The UK participation in its preparation was entrusted to Technical Committee CW/35, Wallcoverings, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Sta

4、ndards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Stand

5、ard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the res

6、ponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front c

7、over, the EN title page, pages 2 to 13 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 13139 Corr. No. 1 April 2001 Correct EN document inserted.EUROPEANSTANDARD NORMEEUROPENNE

8、 EUROPISCHENORM EN13085 January2001 ICS79.100;91.180 Englishversion WallcoveringsSpecificationforcorkrolls RevtementsmurauxSpcificationpourlesrouleauxen lige WandbekleidungenFestlegungfrKorkrollen ThisEuropeanStandardwasapprovedbyCENon6January2001. CENmembersareboundtocomplywiththeCEN/CENELECInterna

9、lRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialv

10、ersions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germa

11、ny,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyan

12、ymeansreserved worldwideforCENnationalMembers. Ref.No.EN13085:2001EPage2 EN13085:2001 Contents Page Foreword 3 1S c o p e 4 2 Normativereferences 4 3 Termsanddefinitions 4 4 Requirements 5 5 Testmethods 5 6 Evaluationofconformity 7 7 Marking,labellingandpackaging 7 AnnexA(normative)Modifications,for

13、corkproducts,togeneraltestmethodCgiveninEN12149 8 AnnexB(informative)OptionalProperties 9 AnnexC(normative)Factoryproductioncontrolandinitialtypetesting 10 AnnexD(informative)Supplementaryinformation 12 Bibliography 13Page3 EN13085:2001 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitte

14、eCEN/TC99“Wallcoverings“, thesecretariatofwhichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyJuly2001,andconflictingnationalstandardsshall bewithdrawnatthelatestbyJuly2001. AccordingtotheCEN/CENELECInternal

15、Regulations,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg, Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom.Page4 EN13085:20

16、01 1S c o p e ThisEuropeanStandardspecifiestherequirementsofcorkwallcoveringsinrollformtobeused withinbuildings.Thestandardcontainsprovisionsfortheevaluationofconformityoftheproduct.It alsoincludesrequirementsformarking,packagingandlabelling. 2 Normativereferences ThisEuropeanStandardincorporatesbyd

17、atedorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriateplacesinthetextandthe publicationsarelistedhereafter.Fordatedreferencessubsequentamendmentsto,orrevisionsofany ofthesepublicationapplytothisEuropeanStandardonlywhenincorporatedinitbyamendmentor re

18、vision.Forundatedreferencesthelatesteditionofthepublicationreferredtoapplies(including amendments). EN426 ResilientfloorcoveringsDeterminationofwidth,length,straightnessand flatnessofsheetmaterial EN12105 ResilientfloorcoveringsDeterminationofmoisturecontentofagglomerated compositioncork EN12149 Wal

19、lcoveringsinrollformDeterminationofmigrationofheavymetalsand certainotherelements,ofvinylchloridemonomerandofformaldehyde release ISO4708:2000 CompositioncorkGasketmaterialTestmethods ISO7322:2000 CompositioncorkTestmethods ENISO9001 QualitysystemsModelforqualityassuranceindesign,development, produc

20、tion,installationandservicing(ISO9001:1994) ENISO9002 QualitysystemsModelforqualityassuranceinproduction,installationand servicing(ISO9002:1994) 3 Termsanddefinitions ForthepurposesofthisEuropeanStandardthefollowingtermsanddefinitionsapply: 3.1 cork protectivelayerofthecorkoaktree( QuercussuberL. )w

21、hichcanbeperiodicallyremovedfromits trunkandbranchestoprovidetherawmaterialforcorkproducts 3.2 granulatedcork fragmentsofcorkobtainedbygrindingand/ormillingrawormanufacturedcork 3.3 agglomeratedcompositioncork productobtainedfromtheagglutinationofgranulated corkwiththeadditionofabindernotderived fro

22、mcorkcellsPage5 EN13085:2001 3.4 wallcovering product,suppliedeitherinpanelorrollform , forhangingontointernalwallsorceilingsinbuildings bymeansofanadhesivecoveringthewholeoftheinterfacebetweenthewallcoveringandthe support 3.5 corkwallcovering productmainlymadefromcorkoragglomeratedcompositioncork,s

23、uppliedeitherinpanelorroll form,whosemainintendeduseisforindoorapplication 3.6 batch definedquantityofsomecommoditymanufacturedorproducedunderconditionswhichare presumeduniform 3.7 testspecimen partofasamplepreparedforatest 4 Requirements Corkrollsdescribedinthisstandardshallconformtotheappropriater

24、equirementsspecifiedinTable 1,whentestedinaccordancewithmethodsgiventherein. NOTEInformationonadditionalpropertiesisgiveninannexB. 5 Testmethods 5.1 Sampling Thesamplefortestingshallbetakenfromtheavailablematerial,eitherduringtheprocessorfrom thefinalproduct.Testspecimensshallbetakenfromthesampleata

25、minimumdistanceof100mm fromtheedges. Eachtestspecimenshallbesquarelycutandhaveedgesperpendiculartoitssurface andnotshowanycracksorfolds. Theminimumnumberoftestspecimensrequiredtogetonetestresultonaproductpropertyisgiven inTable1. 5.2 Conditioning Testspecimensshallbeconditionedbeforetestingforatleas

26、t12hat(235)C.Incaseofdispute, theyshallbeconditionedbeforetestingat(232)Cand(505)%relativehumidity,foratleast 24h.Beforethedeterminationofthemoisturecontentnoconditioningshallbedone. 5.3 Testing TestsshallbecarriedoutinaccordancewiththestandardsreferredtoinTable1.Thetestresultona productpropertyisth

27、emeanofthemeasuredvaluesonthenumberoftestspecimensgiveninTable 1.Page6 EN13085:2001 Table1Requirements Property Requirements Dimension(or mass)oftest specimens Testmethod Number oftest specimens togetone result Dimensions width length Straightness maximumdeviationfrom nominalvalue 1% nominal toleran

28、ceallowedfrom nominalvalue: 1%pereach5mlength 200mmx w a fullroll fullroll EN426 5 1 1 Overall thickness maximumdeviationfrom nominalvalue:0,3mm 100mmx50mm ISO 7322:2000 5 Tensile strength b 200kPa 100mmx50mm ISO 7322:2000 3 + 3 c Moisture content 7% 100mmx100mm EN12105 3 Flexibility thereshallbenoc

29、racksor failure 150mmx15mm ISO 4708:2000 methodA 3 Formaldehyde released 95mg/kg 50mmx25mm (10gto15g) EN12149 methodC d 3 a Where wisthenominalwidthoftheroll b Applicabletothicknessesnotlessthan2mm c Threetestspecimensshallbetestedinthemanufacturingdirectionandthreeintheperpendiculardirection. d Wit

30、hthemodificationsgiveninannexA.Page7 EN13085:2001 6 Evaluationofconformity Theevaluationofconformityshallbebasedonfactoryproductioncontrolandtestsonsamplestaken atthefactory,followingtheprovisionsgiveninannexCofthisEuropeanStandard. 7 Marking,labellingandpackaging Productsconformingtotherequirements

31、ofthisstandardshallbeclearlyandindeliblymarkedby themanufacturereitheronthepackagingoronanadhesivelabelwiththefollowinginformation : a) thenumberandtheyearofthisstandard,i.e.EN13085:2001; b)nameorsuppliersidentification; c)theproductname andbatchnumber (possiblyincodeform); d)yearofmanufacture(lastt

32、wodigits ); e)thenominaldimensionsofrollsorsheets; f)thecoveredareainsquaremetres; g)awarningthatpackagesshouldbestored/shieldedfromdirectsunlightandatmospheric humidity.Page8 EN13085:2001 AnnexA (normative) Modifications,forcorkproducts,togeneraltestmethodCgiveninEN12149 Forthepurposesofthisstandar

33、dthetestmethodCreferredtoinEN12149,shallbemodifiedfor corkproducts,inaccordancewiththefollowing,therestofthestandardremainingunchanged: 1S c o p e TestmethodCinEN12149alsoappliestocorkwallcoveringsinrollform. 6.5 Standardsolutions Useatleastfivesolutionsandablank.Theconcentrationofthesestandardsshal

34、lbesuchthatthey willallowtheinterpolationofresultsandthereadingofthevaluesforthetestspecimensatthe middleofthecalibrationcurve. ExamplesofstandardsolutionsappropriateforcorkproductsaregiveninTable1: Table1Examplesofstandardsolutions Volumeof standardB(ml) Volumeofwater (ml) Formaldehyde Content ( g/

35、ml) 0 5 10 20 50 100 100 95 90 80 50 0 0 0,75 1,50 3,00 7,50 15,00 6.6 Apparatus 6.6.9 Balance, accuratetoread0,1milligramPage9 EN13085:2001 AnnexB (informative) OptionalProperties B.1 General Themanufacturermaychoosetogiveadditionalinformationconcerningotherproductproperties thanthosegiveninTable1o

36、fthisstandard. Thisinformationshouldbegivenaslimitvaluesobtainedbycarryingouttestsinaccordancewith thetestmethodsreferredtobelow. B.2 Apparentdensity TheapparentdensityofcorkwallcoveringsinrollsshouldbedeterminedinaccordancewithEN672 onfivetestspecimenswithdimensions100mmx100mm.Thevaluesshouldbegive

37、ninthe manufacturerstechnicaldatasheet. B.3 Acousticproperties Ifproductsarerequiredforairbornesound insulation,theyshouldbetestedinaccordancewithEN ISO1403.Theweightedsoundreductionindex, R w ,shouldbederivedaccordingtoENISO7171 andshouldbedeclaredbythemanufacturerindecibels. B.4 Thermalproperties

38、Duetotheirnaturalproperties,corkwallcoveringscontributetoreducingenergyconsumption.To evaluateitscontributiontothethermalperformanceofthewalls,theproductshouldbetestedfor thermalresistance(R)orthermalconductivity( )inaccordancewithprEN12667:2000andthe valuedeclaredbythemanufacturerinm . K/WorW/(m .

39、K).Page10 EN13085:2001 AnnexC (normative) Factoryproductioncontrolandinitialtypetesting C.1 General FactoryProductionControl(FPC)meansthepermanentinternalcontrolofproductionexercisedby themanufacturer.Itsimplementationshallbeachievedbycontrolsonrawandconstituentmaterials, onprocessesandmanufacturing

40、equipmentandonfinishedproductsandbymakinguseofthe resultsthusobtained. Factoryproductioncontrolshallbeoperatedaccordingtoadocumentedsystemwhichshallbelaid downinaqualitymanual.Themanufacturersdocumentationshallberelevanttotheproductionand processcontrolused. FPCshallbebasedon: a)controlofrawmaterial

41、, b)processcontrol, c)testingofproducts, d)calibrationplan, e)traceability. WheretheproductionunithasaqualitymanagementsystemaccordingtoENISO9001orENISO 9002andmadespecifictotherequirementsofthisstandard,thisisdeemedtosatisfythegeneral requirementsofFPC. C.2 Controlofrawmaterial Themanufacturershall

42、ensurethatrawandotherconstituentmaterialsconformtotherequirements specifiedbyhim.Indeterminingchecksrequired,considerationshallbegiventothecontrol exercisedbythesupplierandthedocumentedevidenceofthisconformity. C.3 Processcontrol InordertomanufactureproductswhichconformtothisEuropeanStandard,themanu

43、facturershall controlhisprocessandperforminspectionandtestsasdescribedinhisproductioncontrolsystem documentation. C.4 Testingofproducts C.4.1 DirectTesting Whenintroducingaproductwhichistobemanufacturedagainstthisstandard,themanufacturer shallcarryoutinitialtypetesting(ITT)fortheproductinordertoensu

44、reproductconformity.ITT shallberepeatedonchangesormodificationsofproductionifthesearelikelytoaffectconformityof theproductswiththisstandard. Themanufacturershallregularlytestthefinishedproducts.Thesetestsshallbecarriedoutaccording tothemethodsspecifiedinclause5ofthisstandardor,incaseofindirecttesting,

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1