1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-3:2010Textiles Quantitativechemical analysisPart 3: Mixtures of acetate and certainother fibres (method using acetone) (ISO1833-3:2006)Licensed Copy: Wang Bin, ISO
2、/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-3:2010. It is identical to ISO 1833-3:2006. It supersedes BS4407:1988 which will be withdrawn on publication of t
3、he otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include al
4、l the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72124 3ICS 59.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Str
5、ategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-3 October 2010 ICS 59.060.01 English Version Texti
6、les - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) (ISO 1833-3:2006) Textiles - Analyse chimique quantitative - Partie 3: Mlanges dactate et de certaines autres fibres (mthode lactone) (ISO 1833-3:2006) Textilien - Quantitative chemisch
7、e Analysen - Teil 3: Mischungen aus Acetatfasern und bestimmten anderen Fasern (Aceton-Verfahren) (ISO 1833-3:2006) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi
8、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions
9、(English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bul
10、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FO
11、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-3:2010: ELicensed Copy: Wang Bin, IS
12、O/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010EN ISO 1833-3:2010 (E) 3 Foreword The text of ISO 1833-3:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over
13、 as EN ISO 1833-3:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and co
14、nflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According
15、 to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
16、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-3:2006 has been approved by CEN as a EN ISO 1833-3:2010 without any modification. Licensed Copy: Wang B
17、in, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010ISO 1833-3:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work
18、 of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmen
19、tal, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The ma
20、in task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. At
21、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-3 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833-3 ca
22、ncels and replaces Clause 2 of ISO 1833:1977. ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 18
23、33-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certa
24、in protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method usin
25、g acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acry
26、lic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:
27、28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010ISO 1833-3:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of pol
28、ypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and
29、asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and
30、 cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: Mixture
31、s of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010INTERNATIONAL STANDARD
32、 ISO 1833-3:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibres (method using acetone) 1 Scope This part of ISO 1833 specifies a method, using acetone, to determine the percentage of acetate, after removal of non-fibrous
33、matter, in textiles made of binary mixtures of acetate and wool, animal hair, silk, regenerated protein, cotton (scoured, kiered, or bleached), flax, hemp, jute, abaca, alfa, coir, broom, ramie, cupro, viscose, modal, polyamide, polyester, acrylic and glass fibres. It is not applicable to mixtures c
34、ontaining modacrylic fibres, nor to mixtures containing acetate fibres that have been deacetylated on the surface. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refer
35、ences, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The acetate is dissolved out from a known dry mass of the mixture, with acetone. The residue is collected, wa
36、shed, dried and weighed; its mass, corrected if necessary, is expressed as a percentage of the dry mass of the mixture. The percentage of acetate is found by difference. 4 Reagents Use the reagents described in ISO 1833-1 together with that described in 4.1. 4.1 Acetone, distilling between 55 C and
37、57 C. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010ISO 1833-3:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the apparatus described in ISO 1833-1 together with that described in 5.1. 5.1 Conical flask, minimum capacit
38、y 200 ml, glass-stoppered. 6 Test procedure Follow the general procedure described ISO 1833-1, and then proceed as follows. To the specimen contained in the conical flask, add 100 ml of acetone per gram of specimen, shake the flask, allow it to stand for 30 min at room temperature, and then decant t
39、he liquid through the weighed filter crucible. Repeat the treatment twice more (making three extractions in all), but for periods of 15 min only, so that the total time of treatment in acetone is 1 h. Wash the residue into the filter crucible with acetone, and drain using suction. Refill the crucibl
40、e with acetone and allow it to drain under gravity. Finally, drain the crucible using suction, dry the crucible and residue, then cool and weigh them. 7 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,00. 8 Preci
41、sion On a homogeneous mixture of textile materials, the confidence limits of the results obtained by this method are not greater than 1 for the confidence level of 95 %. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBS EN ISO 1833-3:2010Licensed C
42、opy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST
43、ANDARDS, 25/05/2011 08:28, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated b
44、y Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the lat
45、est amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which
46、can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying sta
47、ndardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In re
48、sponse to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through i
49、ts Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial dis
