1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10512:2012Prevailing torque type hexagon r e g u l a r n u t s ( w i t h n o n - m e t a l l i c insert) with metric fine pitch thread Property classes 6, 8 and 10 Copy
2、right European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10512:2012. It supersede
3、s BS EN ISO 10512:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovis
4、ions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77987 9ICS 21.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published u
5、nder the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from I
6、HS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10512 December 2012 ICS 21.060.20 Supersedes EN ISO 10512:1997English Version Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) crous hex
7、agonaux normaux autofreins ( anneau non mtallique) filetage mtrique pas fin - Classes de qualit 6, 8 et 10 (ISO 10512:2012) Sechskantmuttern mit Klemmteil (mit nichtmetallischem Einsatz), Typ 1, mit metrischem Feingewinde - Festigkeitsklassen 6, 8 und 10 (ISO 10512:2012) This European Standard was a
8、pproved by CEN on 3 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati
9、onal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own langu
10、age and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
11、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man
12、agement Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10512:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reprodu
13、ction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012EN ISO 10512:2012 (E) 3 Foreword This document (EN ISO 10512:2012) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is
14、 held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility tha
15、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10512:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizat
16、ions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt
17、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10512:2012 has been approved by CEN as a EN ISO 10512:2012 without any modification. Copyright European Committee for Standardization P
18、rovided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012ISO 10512:2012(E) ISO 2012 All rights reserved iiiContents PageForeword iv1 Scope 12 Normative references .13 Dimensions .14 Requirements and reference Internat
19、ional Standards 35 Designation . 3Bibliography . 4Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012ISO 10512:2012(E)ForewordISO (the International Organization
20、 for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has
21、the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.Interna
22、tional Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication
23、 as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.I
24、SO 10512 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.This second edition cancels and replaces the first edition (ISO 10512:1997), of which it constitutes a minor revision.iv ISO 2012 All rights reservedCopyright European Committe
25、e for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012INTERNATIONAL STANDARD ISO 10512:2012(E)Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thr
26、ead Property classes 6, 8 and 101 ScopeThis International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for sizes
27、 D up to and including 16 mm and product grade B for sizes D above 16 mm, and with property classes 6, 8 and 10.If other specifications are required, they can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 and ISO 4759-1.NOTE 1 The dim
28、ensions of the nuts correspond to those given in ISO 8673 plus prevailing torque feature.NOTE 2 As there is an insufficient nut height due to the fine pitch thread, there is a higher probability of nut thread stripping. Hence, high nuts according to ISO 7041 are preferably used.2 Normative reference
29、sThe following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and d
30、escriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 724, ISO general-purpose metric screw threads Basic dimensionsISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and f
31、ine pitch threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium qualityISO 2320, Prevailing torque type steel nuts Mechanical and performance propertiesISO 3269, Fasteners Acceptance inspectionISO 4
32、042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and CISO 6157-2, Fasteners Surface discontinuities Part 2: NutsISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10683, Fasteners Non-electr
33、olytically applied zinc flake coatings3 DimensionsSee Figure 1 and Table 1.Symbols and descriptions of dimensions are specified in ISO 225. ISO 2012 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking
34、 permitted without license from IHS-,-,-BS EN ISO 10512:2012ISO 10512:2012(E)aPrevailing torque element; shape at the discretion of the manufacturer.b = 15 to 30.c = 90 to 120.Figure 1Table 1 DimensionsDimensions in millimetresThread (D Pa)M81M101M101,25M121,25M121,5(M141,5)bM161,5M201,5M242M302M362
35、damax. 8,75 10,80 13 15,10 17,30 21,60 25,90 32,40 38,90min. 8,00 10,00 12,00 14,00 16,00 20,00 24,00 30,00 36,00dwmin. 11,63 14,63 16,63 19,64 22,49 27,70 33,25 42,75 51,11e min. 14,38 17,77 20,03 23,36 26,75 32,95 39,55 50,85 60,79hmax. 9,50 11,90 14,90 17,00 19,10 22,80 27,10 32,60 38,90min 8,92
36、11,20 14,20 15,90 17,80 20,70 25,00 30,10 36,40m min 6,44 8,04 10,37 12,10 14,10 16,90 20,20 24,30 29,40mwmin. 5,15 6,43 8,30 9,68 11,28 13,52 16,16 19,44 23,52smax. 13,00 16,00 18,00 21,00 24,00 30,00 36,00 46,00 55,00min. 12,73 15,73 17,73 20,67 23,67 29,16 35,00 45,00 53,80aP is the pitch of the
37、thread.bThe size in parentheses should be avoided, if possible.2 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012ISO 10512:2012(E)
38、4 Requirements and reference International StandardsSee Table 2.Table 2 Requirements and reference International StandardsMaterial Nut body SteelInsert For example, polyamideGeneral requirements International Standard ISO 8992Thread Tolerance class 6HInternational Standards ISO 261, ISO 724, ISO 965
39、-2Mechanical and performance propertiesProperty class 6, 8, 10aInternational Standards ISO 898-2, ISO 2320Tolerance Product grade For D 16 mm: AFor D 16 mm: BInternational Standard ISO 4759-1Finish CoatingAs processedRequirements for electroplating are specified in ISO 4042.Requirements for non-elec
40、trolytically applied zinc flake coatings are specified in ISO 10683.Additional requirements or other finishes or coatings shall be agreed between the supplier and the purchaser.Surface integrity Limits for surface discontinuities are specified in ISO 6157-2.Acceptability Acceptance inspection is spe
41、cified in ISO 3269.aFor D 16 mm property class 10 is not specified.5 DesignationEXAMPLE A prevailing torque type regular hexagon nut with non-metallic insert, fine pitch thread M12 1,5 and property class 8 is designated as follows:Prevailing torque type hexagon regular nut ISO 10512 - M12 1,5 - 8 IS
42、O 2012 All rights reserved 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012ISO 10512:2012(E)Bibliography1 ISO 8673, Hexagon regular nuts (style 1) with metri
43、c fine pitch thread Product grades A and B4 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10512:2012Copyright European Committee for Stand
44、ardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking perm
45、itted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing
46、 British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.Brit
47、ish Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amend
48、ments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify
