1、Earth-moving machinery SafetyPart 12: Requirements for cable excavatorsBS ISO 2047412:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Earth-moving machinery Safety Part 12: Requirements for cable excavatorsEngins de terrassement Scurit Partie 12: Exigenc
2、es applicables aux pelles cbleINTERNATIONAL STANDARDISO20474-12Second edition2017-07Reference numberISO 20474-12:2017(E)National forewordThis British Standard is the UK implementation of ISO 2047412:2017.The UK participation in its preparation was entrusted to Technical Committee B/513/1, Earth movi
3、ng machinery (International).A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution
4、 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 81831 8ICS 53.100Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigend
5、a issued since publicationDate Text affected BRITISH STANDARDBS ISO 2047412:2017 ISO 2017Earth-moving machinery Safety Part 12: Requirements for cable excavatorsEngins de terrassement Scurit Partie 12: Exigences applicables aux pelles cbleINTERNATIONAL STANDARDISO20474-12Second edition2017-07Referen
6、ce numberISO 20474-12:2017(E)BS ISO 2047412:2017ISO 20474-12:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
7、 means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH
8、-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 2047412:2017ISO 20474-12:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this
9、publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the
10、country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 20474-12:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety requireme
11、nts and protective measures . 34.1 General . 34.2 Operators station . 34.2.1 General 34.2.2 Roll-over protective structures (ROPS) 34.2.3 Operators protective guard . 34.3 Operators controls and indicators 34.3.1 Controls for driving and steering 34.3.2 Warning indicator . 34.4 Steering 34.5 Swing b
12、rakes . 44.6 Lift system . 44.6.1 Force-controlled operation (lifting, lowering) . 44.6.2 Free-fall operation 44.6.3 Switchover . 44.6.4 Boom 44.6.5 Ropes 44.6.6 Rope drum, rope pulley 54.7 Limiting devices . 54.7.1 Load moment limiting device . 54.7.2 Lift limiting switch . 54.7.3 Limit switch for
13、the boom hoist system 54.8 Calculation of the lift capacity 54.8.1 Calculation method 54.8.2 Rated load table for object-handling application 64.9 Safety-related parts of the control system 64.10 Stability 64.10.1 General 64.10.2 Stability in different applications 64.10.3 Dragline bucket . 74.10.4
14、Grab and front shovel. 74.10.5 Object-handling applications 74.11 Cable excavator with electrical power source . 75 Verification of safety requirements and protective measures . 76 Information for use 7Annex A (normative) Requirements for cable excavator swing brakes . 9Annex B (informative) Illustr
15、ations12Bibliography .15 ISO 2017 All rights reserved iiiContents PageBS ISO 2047412:2017ISO 20474-12:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is n
16、ormally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part i
17、n the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular
18、the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this
19、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .i
20、so .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as info
21、rmation about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics
22、and general requirements.This second edition cancels and replaces the first edition (ISO 20474-12:2008), which has been technically revised with the following changes: normative references have been updated; references to national and regional provisions in the withdrawn ISO/TS 20474-14 have been de
23、leted; new safety requirements and protective measures have been added, including requirements for the operators protective guard.It is intended to be used in conjunction with ISO 20474-1.A list of all parts in the ISO 20474 series, published under the general title, Earth-moving machinery Safety, c
24、an be found on the ISO website.iv ISO 2017 All rights reservedBS ISO 2047412:2017ISO 20474-12:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally
25、carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wo
26、rk. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the diff
27、erent approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document
28、 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/
29、 patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information
30、about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .htmlThis document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics and gene
31、ral requirements.This second edition cancels and replaces the first edition (ISO 20474-12:2008), which has been technically revised with the following changes: normative references have been updated; references to national and regional provisions in the withdrawn ISO/TS 20474-14 have been deleted; n
32、ew safety requirements and protective measures have been added, including requirements for the operators protective guard.It is intended to be used in conjunction with ISO 20474-1.A list of all parts in the ISO 20474 series, published under the general title, Earth-moving machinery Safety, can be fo
33、und on the ISO website.iv ISO 2017 All rights reserved ISO 20474-12:2017(E)IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.W
34、hen requirements of this type-C standard are different from those which are stated in type-A or B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type
35、-C standard.ISO 20474 provides acceptable safety requirements for earth-moving machinery. This standard does not necessarily provide requirements to meet all national and regional regulatory provisions, e.g. Japan does not allow object handling with earth-moving machinery. ISO 2017 All rights reserv
36、ed vBS ISO 2047412:2017BS ISO 2047412:2017Earth-moving machinery Safety Part 12: Requirements for cable excavators1 ScopeThis document gives the safety requirements specific to cable excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general
37、 safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474-1.This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machi
38、nery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during
39、 commissioning, operation and maintenance.It is applicable only to the machine itself if the cable excavator is intended for use in combination with other equipment or attachments such as drill rigs and those for pile driving or extracting and moving (e.g. rail-track, walking legs, pontoon, ship equ
40、ipment or stationary undercarriages). It does not deal with the specific hazards relevant to such additional equipment or attachments.This document is not applicable to machines manufactured before the date of its publication.2 Normative referencesThe following documents are referred to in the text
41、in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4310, Cranes Test code and proceduresISO 5010,
42、 Earth-moving machinery Rubber-tyred machines Steering requirementsISO 6165, Earth-moving machinery Basic types Identification and terms and definitionsISO 6014, Earth-moving machinery Determination of ground speedISO 7546, Earth-moving machinery Loader and front loading excavator buckets Volumetric
43、 ratingsISO 10262:1998, Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guardsISO 15219, Earth-moving machinery Cable excavators Terminology and commercial specificationsIEC 60204-32, Safety of machinery Electrical equipment of machin
44、es Part 32: Requirements for hoisting machinesISO 20474-1:2017, Earth-moving machinery Safety Part 1: General requirementsEN 791:1995, Drill rigs SafetyINTERNATIONAL STANDARD ISO 20474-12:2017(E) ISO 2017 All rights reserved 1BS ISO 2047412:2017ISO 20474-12:2017(E)3 Terms and definitionsFor the purp
45、oses of this document, the terms and definitions given in ISO 20474-1, ISO 15219, and the following, apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp IEC Electropedia: a
46、vailable at h t t p :/ www .electropedia .org/ 3.1cable excavatorexcavator having a wire-rope-operated upper structure designed primarily for excavation with a dragline bucket, front shovel or grab, used for compacting material with a compaction plate, for demolition work by hook or ball, and for ma
47、terial handling with special equipment (3.3) and attachments (3.2)Note 1 to entry: See Annex B for illustrations.Note 2 to entry: For the definition of excavator, see ISO 6165 or ISO 20474-5.SOURCE: ISO 6165:2012, 4.4.3, modified By adding Notes 1 and 2.3.2boom hoist systemboom system comprising low
48、er, intermediate and head sections, and A-frame and boom hoist winch systems3.3lift systemmain winch system used for earth-moving, demolition, compaction and object-handling (e.g. with hook assembly) applications3.4swingrotation of the upper structure of an excavator in relation to a fixed reference
49、 frame on the ground3.5working swing revolution speedturntable-swing speed, reached in a 180 revolution of the upper structure, with maximum rotation command input starting from a still positionNote 1 to entry: It is expressed in revolutions per minute (r/min).3.6deceleration swing angleangle measured in degrees of swing while the swing motion is decelerated from working swing revolution speed to a complete stop3.7swing torquetorque which propels the upper st
