BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf

上传人:dealItalian200 文档编号:588358 上传时间:2018-12-15 格式:PDF 页数:38 大小:3.09MB
下载 相关 举报
BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf_第1页
第1页 / 共38页
BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf_第2页
第2页 / 共38页
BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf_第3页
第3页 / 共38页
BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf_第4页
第4页 / 共38页
BS ISO IEC 19752-2017 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-functio.pdf_第5页
第5页 / 共38页
亲,该文档总共38页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BS ISO/IEC 19752:2017Information technology Office equipment Method for the determinationof toner cartridge yieldfor monochromaticelectrophotographic printersand multi-function devices thatcontain printer componentsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS I

2、SO/IEC 19752:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC 19752:2017.The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges.A list of organizations represented on this committee can be obtained

3、 on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 89820 4 ICS 37.100.10 Compliance with

4、a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO/IEC 19752:2017Information techno

5、logy Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer componentsTechnologies de linformation Mthode pour la dtermination du rendement des cartouches de toner pour les imprimantes lect

6、rophotographiques monochromatiques et pour les dispositifs multifonctionnels qui contiennent des composants dimprimantesINTERNATIONAL STANDARDISO/IEC19752Reference numberISO/IEC 19752:2017(E)Second edition2017-01 ISO/IEC 2017BS ISO/IEC 19752:2017ii ISO/IEC 2017 All rights reservedCOPYRIGHT PROTECTED

7、 DOCUMENT ISO/IEC 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

8、 written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 1975

9、2:2017(E)BS ISO/IEC 19752:2017ISO/IEC 19752:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Test parameters and conditions . 24.1 Set-up 24.2 Sample size . 34.3 Print mode 34.4 Print environment 34.5 Paper 44.6 Maintenance 44.7 Test file . 44.8 End of

10、life . 55 Test methodology 55.1 Testing procedure . 55.2 Procedure for handling a defective cartridge or printer . 65.2.1 General 65.2.2 Defective cartridge . 65.2.3 Defective printer 66 Determination of the declared yield value and declaration . 66.1 Determination of the declared yield value 66.2 T

11、est data reporting 76.3 Declaration of the yield 7Annex A (informative) Examples of fade 8Annex B (informative) Process flowchart and examples 10Annex C (normative) Standard test page 14Annex D (normative) Sample reporting form 21Annex E (informative) Comparison of yield for two printing systems .24

12、Bibliography .26 ISO/IEC 2017 All rights reserved iiiContents PageBS ISO/IEC 19752:2017ISO/IEC 19752:2017(E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bod

13、ies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other

14、international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and those intended for

15、 its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ d

16、irectives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document wil

17、l be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expre

18、ssions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.The committee responsible for this document is ISO/IEC JTC 1, Infor

19、mation technology, SC 28, Office equipment.This second edition cancels and replaces the first edition (ISO/IEC 19752:2004), which has been technically revised.It also incorporates the Technical Corrigendum ISO/IEC 19752:2004/Cor 1:2012.iv ISO/IEC 2017 All rights reservedBS ISO/IEC 19752:2017ISO/IEC

20、19752:2017(E)IntroductionThe purpose of this document is to provide a process for determining the page yield for toner cartridges for monochromatic print systems using a standard office consumer type test page. In the case where a cartridge can be used in multiple printer models, only one yield test

21、 is performed as long as the difference between printer models does not impact yield.NOTE 1 A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In this case, only one yield test is required as long as there are no differences in the cartridges othe

22、r than market identifiers.This document prescribes the following: the test method that manufacturers use to determine cartridge yield; the method for determination of declared yield values from the test results; the appropriate method of describing the yield of cartridges in documentation supplied t

23、o the consumer by the manufacturer.The end of life is judged with either of the two phenomena, “image fade” caused by toner depletion of the cartridge in the printing system or “automatic printing stop” by the toner out detection function.NOTE 2 A comparison of yield for two printing systems is show

24、n in Annex E. ISO/IEC 2017 All rights reserved vBS ISO/IEC 19752:2017BS ISO/IEC 19752:2017Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components1 ScopeThis

25、 document is limited to the evaluation of toner cartridge page yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic print systems. This document could also be applied to the printer component of any

26、multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components).This document is only intended for the measurement of toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.NOTE 1 Applicatio

27、n of this document for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle-type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This document is intended fo

28、r equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document.NOTE 2 An all-in-one cartridge is a cartridge that includes at least a toner containment pa

29、rt, a photoreceptor part and a developer part (see ISO/IEC 29142-1).2 Normative referencesThere are no normative references in this document.3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in st

30、andardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp3.1fadephenomenon whereby a noticeable reduction in density uniformity across the page occursNote 1 to entry: In this te

31、st, fade is defined as a noticeably lighter, 3 mm or greater, gap located in the text or boxes around the periphery of the test page. The determination of the change in lightness is to be made referenced to the 100th page printed for each cartridge in testing. For examples of fade, see Annex A.3.2sh

32、ake procedurespecified method to carry out shaking of a cartridge according to the user manualNote 1 to entry: If a shake procedure is used in testing, it will be noted in the report.INTERNATIONAL STANDARD ISO/IEC 19752:2017(E) ISO/IEC 2017 All rights reserved 1BS ISO/IEC 19752:2017ISO/IEC 19752:201

33、7(E)3.3toner lowsignal generated by the printer when it has been detected that the amount of toner is such that a toner change will be required soonNote 1 to entry: It does not indicate that the system is out of toner.3.4toner outsignal generated by the printer when the toner in the system is deplet

34、ed and the printer is incapable of reliable printing without user interventionNote 1 to entry: For the purpose of this test, the toner out signal will only be used if it causes the printer to stop printing and requires toner replacement to continue printing.3.5end of lifewhen the printer declares “t

35、oner out” (3.4) or when fade (3.1) is observedNote 1 to entry: For more information about the exact requirements for judging end of life, see 4.8.3.6individual page yieldnumber of “standard page file” pages printed between cartridge installation and end of life (3.5)Note 1 to entry: For replenishmen

36、t systems, the individual page yield is determined by counting the number of “standard page file” pages printed between prescribed quasi-end of life conditions (defined in 4.5).3.7declared page yieldvalue at or below the lower 90 % confidence bound as prescribed in 6.14 Test parameters and condition

37、s4.1 Set-upPlace the printer on a horizontal surface and set-up the printer according to the installation guide provided in the printer users manual. Use the most recent printer driver available from the manufacturer. The driver version will be specified on the test report. Cartridge installation sh

38、all be completed following the instructions in the cartridge installation guide. If there is a contradiction between the printer and cartridge manuals for the cartridge installation, the cartridge manual will take precedence except if changes are recommended for printer or driver settings.If the car

39、tridge used in testing is a toner replenishment or toner bottle type, then one complete toner cartridge will be used in each printer before the start of the test. The pages printed to deplete this priming cartridge do not have to be recorded and printing can be conducted at any environment. This pri

40、ming cartridge is used to bring the printing system to a set toner level condition.All image and print quality modifiers shall be at their factory pre-set configuration for the printer and default installed condition for the driver. If the printer and driver differ, then the driver defaults shall be

41、 used. Any user selectable toner conservation modes shall be disabled during testing.For printers that default to duplex printing, the default shall be overridden and the printer shall be set to simplex for yield testing.If the printer under test uses an internal PDF interpreter, it is okay to use i

42、t as long as the printer defaults are set to not substitute fonts. If the internal interpreter is used, this shall be noted on the report.To assure that the test page is rendered correctly, any page size modifiers such as “Fit to Page”, “Page Centring” and font substitution shall be turned off. To f

43、urther ensure that font substitution does not 2 ISO/IEC 2017 All rights reservedBS ISO/IEC 19752:2017ISO/IEC 19752:2017(E)occur, fonts shall be downloaded as TrueType fonts if the driver provides that option. If the option exists, rendering of graphics shall be performed by the printer, not the appl

44、ication software or operating system. The file shall be printed using the fonts embedded in the file and shall be rendered on the page in a size corresponding to the dimensions in the test page description. Page placement modifiers, such as page centring, may be used to place the image properly on t

45、he page. If there is a question about rendering settings affecting the yield, the setting shall be noted in the report.NOTE The application software (i.e. Adobe ReaderTM1), printer driver and printer may have page size modifier functions, such as “Fit to Page”. Make sure that all of these functions

46、are disabled.4.2 Sample sizeA combination of at least three cartridges shall be run on a combination of at least three printers (for a minimum of nine cartridges and three printers). This is the minimum number of engines and cartridges that shall be used for testing. When feasible, it is recommended

47、 that additional engines and cartridges be used in testing. When testing additional engines and cartridges above the minimum, an effort should be made to test equal number of cartridges on each engine. For example, if an additional engine is to be tested then the minimum number of cartridges to be t

48、ested would be 12 (3 cartridges 4 engines). When testing cartridges for a released product, it is recommended that cartridges and printers are procured from various sources, or selected from different production lots. The printers and cartridges shall be within their useful life as stated in their u

49、sers manual.It is recommended that an additional cartridge be procured to allow for the possibility of cartridge failure during testing.4.3 Print modeFor reporting cartridge yield, the test shall be run in semi-continuous print mode simplex printing. The actual print speed will be semi-continuous because of printing being interrupted for paper replenishment, etc. Every attempt should be made to have printing be continuous from the start of a cartridge to the end of cartridge life. If the printer is powered down at the end of day duri

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1