1、CAN/CGSB-4.2 No. 72.2-M91/ ISO 6741-2:1987Extended April 1997 Reaffirmed November 2012Textile test methodsTextiles Fibres and yarns Determination of commercial mass of consignments Part 2: Methods for obtaining laboratory samples (ISO 6741-2:1987, IDT)(The International Standard ISO 6741-2:1987 is a
2、dopted without modifications (IDT) as a CGSB Standard CAN/CGSB-4.2 No. 72.2-M91/ISO 6741-2:1987 and has been approved as a National Standard of Canada by the Standards Council of Canada.)ICS 59.080.20; 59.060.01National Standard of CanadaInternational Organization for StandardizationThe CANADIAN GEN
3、ERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards co
4、mmittees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. An
5、y given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria a
6、nd procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards
7、and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement,
8、 which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and order
9、ing instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb. Although the intended primary application of this standard is st
10、ated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. T
11、his document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior
12、to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not
13、be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Mana
14、ger Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improvement of voluntary standa
15、rdization in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and internation
16、al trade, and furthering international cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to
17、the technical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators,
18、 users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are encouraged to use NSCs. T
19、hese standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert Street Ottawa, Ont
20、ario K1P 6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.g
21、c.ca/ongc-cgsb NATIONAL STANDARD OF CANADA CAN/CGSB-4.2 No. 72.2-M91/ ISO 6741-2:1987Extended April 1997 Reaffirmed November 2012Textile test methods Textiles Fibres and yarns Determination of commercial mass of consignments Part 2: Methods for obtaining laboratory samples (ISO 6741-2:1987, IDT)(The
22、 International Standard ISO 6741-2:1987 is adopted without modifications (IDT) as a CGSB Standard CAN/CGSB-4.2 No. 72.2-M91/ISO 6741-2:1987 and has been approved as a National Standard of Canada by the Standards Council of Canada.)NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Reviewed by the Approve
23、d by the Canadian General Standards Board Standards Council of CanadaPublished June 1991 by the Canadian General Standards Board Gatineau, Canada K1A 1G6Minister of Supply and Services Canada 1991 No part of this publication may be reproduced in any form without the prior permission of the publisher
24、. COPYRIGHT, ISO 1987. All rights reserved. NOT FOR RESALE. Prepared by the International Organization for StandardizationCETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.CAN/CGSB-4.2No. 72.2-M91/ISO 6741-2:1987 CANADIAN GENERAL STANDARDS BOARDCommittee on Textile Test
25、Methods and Terminology(Voting membership at date of reaffirmation)General Interest CategoryBatcheller, J. University of AlbertaCarrick, D. ConsultantDavie, N. ConsultantLiu, S. University of ManitobaMan, T.M. ConsultantTait, C. National Defence/DSSPMProducer CategoryAdam, C. PGI/Difco Performance F
26、abrics Inc.Bowen, D. DuPont Protection TechnologiesLawson, L. Walls Apparel Canada Inc.Leonard, D. Invista (Canada) Co.Schumann, E. Lincoln Fabrics Ltd.Zukowsky, D. Marv Holland Apparel Ltd.Regulator CategoryAndersson, C. Health CanadaUser CategoryBourget, S. National Defence/QETEHong, T. Exova Grou
27、p Ltd.Izquierdo, V. Textile Technologies CentreLitva (Scalzo), M. Canada Border Services AgencyMacLeod, J. Public Works and Government Services CanadaSirimanna, A. Sears Canada Inc.Tebbs, C. International Drycleaners CongressSecretary (non-voting)Grabowski, M. Canadian General Standards BoardCAN/CGS
28、B-4.2 No. 72.2-M91/ ISO 6741-2:1987 Extended April 1997 Reaffirmed November 2012Preface to the National Standard of CanadaThis National Standard of Canada has been extended and reaffirmed by the CGSB Committee on Textile Test Methods and Terminology. It is identical in content and in layout with Int
29、ernational Standard ISO 6741-2, Textiles Fibres and yarns Determination of commercial mass of consignments Part 2: Methods for obtaining laboratory samples, published 1987-04-15 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The internationa
30、l standard was reviewed by the CGSB committee to determine its suitability for Canadian use. It was agreed to use it in total, without editorial changes.Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever the
31、y appear.Some terminology and conventions are not identical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker rather than the point.The following National Standards of Canada correspond to the ref
32、erenced ISO standards:CANADA ISOCAN/CGSB-4.175 Part 2/ISO 6348 ISO 6348 CAN/CGSB-4.2 No. 72.1/ISO 6741-1 ISO 6741 Part 1The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This document does not purport to address all th
33、e safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any
34、responsibility for any injury or damage that may occur during or as the result of tests, wherever performed.The CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5
35、740.The International Standards may be obtained from IHS Canada, 1 Antares Drive, Suite 200, Ottawa, Ontario K2E 8C4. Telephone 613-237-4250 or 1-800-267-8220. Fax 613-237-4251.iCopyright NoticeThis standard contains information copyright-protected by the International Organization for Standardizati
36、on (ISO) or, where appropriate the International Electrotechnical Commission (IEC). Except as permitted under the Laws of Canada, no extract of the International Standard may be reproduced, stored in any retrieval system or transmitted in any form or by any means, electronic, photocopying, recording
37、 or otherwise, without prior written permission from SCC. Requests for permission to reproduce the International Standard or parts thereof should be addressed to:Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario KlP 6N7 Telephone 613-238-3222COPYRIGHT VIOLATORS WILL BE PROSECUTED TO THE FULL EXTENT OF THE LAW.
