1、 CAN/CGSB-4.2 No. 73.1-M91 ISO 2647:1973, IDT Extended April 1997 Reaffirmed October 2013 International Organization for Standardization National Standard of Canada ICS 59.060.10 ISO 1973. CGSB 2013. All rights reserved. Unauthorized reproduction is strictly prohibited. Textile test methods Textiles
2、 Tear properties of fabrics Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000, IDT) Textile test methods Wool Determination of percentage of medullated fibres by the projection microscope (ISO 2647:1973, IDT) The CANADIAN GENERAL STANDARDS BOARD (CGSB)
3、, under whose auspices this standard has been developed, is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The stand
4、ards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensu
5、s of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by
6、 the Standards Council of Canada. In addition to standards it publishes as National Standards of Canada, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are dev
7、eloped in conformance with the policies described in the CGSB Policy and Procedures Manual for the Development and Maintenance of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard wi
8、thin five years of the date of publication. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing o
9、f CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue at our Web site www.tpsgc-pwgsc.gc.ca/ ongc-cgsb along with more information about CGSB products and services. Although the intended primary application of this standard is
10、stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous.
11、 This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prio
12、r to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall no
13、t be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Ma
14、nager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The Standards Council of Canada (SCC) is the coordinating body of the Canadian standardization network, which is composed of people and organizations involved in the development, promotion and implementation of standa
15、rds. Through the collaborative efforts of Canadian standardization network members, standardization is helping to advance the social and economic well-being of Canada and to safeguard the health and safety of Canadians. The networks efforts are overseen by SCC. The principal objectives of SCC are to
16、 foster and promote voluntary standardization as a means of advancing the national economy, supporting sustainable development, benefiting the health, safety and welfare of workers and the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering in
17、ternational cooperation in relation to standardization. An important facet of the Canadian standards development system is the use of the following principles: consensus; equal access and effective participation by concerned interests; respect for diverse interests and identification of those who sh
18、ould be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by interested parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration a
19、s the initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the
20、responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, a
21、s may be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest
22、 edition from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests with: Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7, CANADA How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mai
23、l CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb NATIONAL STANDARD OF CANADA CAN/CGSB-4.2 No. 73.1-M91 ISO 2647:1973, IDT Extended April 1997 Re
24、affirmed October 2013 Textile test methods Wool Determination of percentage of medullated fibres by the projection microscope (ISO 2647:1973, IDT) CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISE. Published June 1991 by the Canadian General Standards Board Gatineau, Ca
25、nada K1A 1G6 Minister of Supply and Services Canada 1991 No part of this publication may be reproduced in any form without the prior permission of the publisher. Prepared by the International Organization for Standardization Reviewed by the Canadian General Standards Board Approved by the CAN/CGSB-4
26、.2 No. 73.1-M91 ISO 2647:1973, IDT CGSB 2013 All rights reserved CANADIAN GENERAL STANDARDS BOARD Committee on Textile Test Methods and Terminology (Voting membership at date of reaffirmation) General interest category Batcheller, J. University of Alberta Carrick, D. Consultant Davie, N. Consultant
27、Liu, S. University of Manitoba Man, T.M. Consultant Tait, C. National Defence/DSSPM Producer category Adam, C. Tencate Protective Fabrics Canada Boivin, D. E.I. DuPont Co. Lawson, L. Davey Textile Solutions Leblanc, J.-M. Marv Holland Apparel Ltd. Schumann, E. Lincoln Fabrics Ltd. Taylor, V. Invista
28、 (Canada) Co. Regulator category Andersson, C. Health Canada User category Bourget, S. National Defence/QETE DEntremont, E. Royal Canadian Mounted Police Izquierdo, V. Textile Technologies Centre Kohli, G. Sears Canada Inc. Larsen, A.-L. Exova Group Ltd. Litva, M. Canada Border Services Agency MacLe
29、od, J. Public Works and Government Services Canada Tebbs, C. International Drycleaners Congress Secretary (non-voting) Grabowski, M. Canadian General Standards Board CGSB 2013 All rights reserved i CAN/CGSB-4.2 No. 73.1-M91 ISO 2647:1973, IDT Extended April 1997 Reaffirmed October 2013 Preface to th
30、e National Standard of Canada This National Standard of Canada has been extended and reaffirmed by the CGSB Committee on Textile Test Methods and Terminology and has been approved as a National Standard of Canada by the Standards Council of Canada. It is identical in content and in layout with Inter
31、national Standard ISO 2647, Wool Determination of percentage of medullated fibres by the projection microscope, published 1973-04-01 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee
32、 to determine its suitability for Canadian use. It was agreed to use it in total, without editorial changes. Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever they appear. The following National Standards o
33、f Canada correspond to the referenced ISO standards: CANADA ISO CAN/CGSB-4.2 No. 48 ISO 137 ISO 137 CAN/CGSB-4.2 No. 2 ISO 139 The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This method does not purport to address a
34、ll the safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. The CGSB National Standards of C
35、anada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb. The International Standards may be obtained from IHS G
36、lobal Canada Ltd., 200-1331 MacLeod Trail SE, Calgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800-267-8220, fax 613-237-4251, Web site .Copyright Notice The Canadian adoption of this International Standard as a National Standard of Canada contains information copyright protected by the Canadia
37、n General Standards Board. All rights reserved. No part of this National Standard of Canada may be reproduced in any form without the prior permission of the Canadian General Standards Board. ISO material is reprinted with permission. Requests for permission to reproduce this National Standard of Canada or parts thereof should be addressed to: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 Copyright violators will be prosecuted to the full extent of the law.
