1、CAN/CGSB3.32007Supersedes CAN/CGSB-3.3-99Kerosene ICS 75.160.20National Standard of CanadaCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The CANADIAN GENERAL STANDARDS BOARD (CGSB),
2、under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus pr
3、ocess. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed
4、 on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for
5、 this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards a
6、re developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome, sh
7、ould be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in
8、 the CGSB Catalogue, which is published annually and is available without charge upon request. An electronic version, CAT, is also available. More information is available about CGSB products and services at our Web site www.ongc-cgsb.gc.ca.Although the intended primary application of this standard
9、is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardo
10、us. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements p
11、rior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall
12、 not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: Th
13、e Manager Strategic Standardization Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improveme
14、nt of voluntary standardization in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating do
15、mestic and international trade, and furthering international cooperation in the field of standards.A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approv
16、al does not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, p
17、roducers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are enco
18、uraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard.The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Alber
19、t Street Ottawa, Ontario K1P 6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongcpwgsc.gc.ca on the Web www
20、.ongc-cgsb.gc.ca Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL STANDARD OF CANADA CAN/CGSB3.32007Supersedes CAN/CGSB-3.3-99KEROSENENATIONAL STANDARD OF CANADA CAN/CGSB3.142
21、006Prepared by the Approved by the Canadian General Standards Board Standards Council of CanadaPublished July 2007 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services, the Mi
22、nister responsible for the Canadian General Standards Board, (2007). No part of this publication may be reproduced in any form without the prior permission of the publisher.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking p
23、ermitted without license from IHS-,-,-CANADIAN GENERAL STANDARDS BOARDCOMMITTEE ON MIDDLE DISTILLATE FUELS(Voting membership at date of approval)ChairDickout, S. National Defence (User)General Interest CategoryBerthiaume, M.D. Oleotek Inc.Dunn, T.R. ConsultantFadda, N. Certispec Services Inc.Jaaskel
24、ainen, H. ConsultantJacula, T. Maxxam Analytics Inc.King, L.J. Transport CanadaLee, S.W. Natural Resources CanadaMeyer, F.R. Phase TechnologyPickard, A.L. ConsultantTharby, R.D. Tharby Technology, ConsultantsTuringia, M. Amtek Engineering Services Ltd.Webster, G. Advanced Engine Technology Ltd.Wispi
25、nski, D. Alberta Research CouncilProducer CategoryChristiansen, G. Imperial Oil Ltd.Cosentino, J. Afton Chemical Corp.Graul, L. Husky Oil Ltd.Hirtle, S. Baker PetroliteJayaraman, G. Topia Energy Inc.Jobin, J.L. Ultramar Ltd.Kenney, B. Petro-CanadaMacMillan, D. Suncor Energy Products Inc.Malynowsky,
26、E. Innospec Fuel SpecialtiesManuel, M. North AtlanticMitchell, K. Shell Canada ProductsMozdzen, E. Lubrizol Canada Ltd.Norton, K. Biox Corp.Payne, J.P. Infineum Canada Ltd.Porter, S. Canadian Renewable Fuels AssociationRobichaud, S. Irving Oil Ltd.Strong, R. GE Water and Process TechnologiesWardrop,
27、 R. Rothsay RecyclesRegulator CategoryArchambault, R. Gouvernement du QubecUser CategoryKhan, S. Ministry of Transportation, OntarioMcCagg, R. Government of Northwest TerritoriesReny, G. Public Works and Government Services CanadaStewart, A. Government of NunavutStumborg, M. Agriculture and Agri-Foo
28、d CanadaYip, Y.M. Canadian Coast GuardSecretary (Nonmember)Charest, R. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Works and Government Services Canada.CAN/CGSB3.32007Copyright Canadian General Sta
29、ndards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB3.32007 1CAN/CGSB3.32007Supersedes CAN/CGSB-3.3-99CANADIAN GENERAL STANDARDS BOARDKEROSENE1. SCOPE1.1 This standard applies to two types of light petroleum d
30、istillates.1.2 The light petroleum distillates covered by this standard are intended for use in applications as described below.1.2.1 Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN/CSA-B140.9.3, when used in well-ventilated surroundings, and in wick-fed illum
31、inating lamps.1.2.2 Type No. 2-K Kerosene is intended for use in flue-connected stoves and heaters and should not be used in unvented applications.1.3 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This documen
32、t does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.
33、2. REFERENCED PUBLICATIONS2.1 The following publications are referenced in this standard: 2.1.1 Canadian General Standards Board (CGSB)CAN/CGSB-3.0 Methods of Testing Petroleum and Associated Products:No. 16.0 Sulphur in Diesel Fuel and Similar Middle Distillates by Energy Dispersive X-Ray Fluoresce
34、nce Spectrometry (EDXRF).2.1.2 Canadian Standards Association (CSA)CAN/CSA-B140.9.3 Portable Kerosine-Fired Heaters.2.1.3 ASTM InternationalAnnual Book of ASTM Standards (Appendix A).2.2 A dated reference in this standard is to the issue specified. An undated reference in this standard is to the lat
35、est issue, unless otherwise specified by the authority applying this standard. The sources are given in the Notes section.3. CLASSIFICATION3.1 The kerosene shall be supplied in the following types, as specified (par. 7.1.1):3.1.1 TypesType No. 1-K Type No. 2-K.Copyright Canadian General Standards Bo
36、ard Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 CAN/CGSB3.320074. GENERAL REQUIREMENTS4.1 The kerosene shall be a blend of hydrocarbons and shall be visually clear, free from undissolved water (par. 7.2.5), sediment and
37、suspended matter under the temperature and conditions of custody transfer (par. 7.2.4).4.2 Type No. 1-K kerosene shall not be dyed (par. 1.2.1, 5.5 and 7.2.2).4.3 See Appendix B for regulations that apply to kerosene.5. DETAILED REQUIREMENTS5.1 The kerosene shall comply with the specified limiting v
38、alues. The specified limiting values shall not be changed. This precludes any allowances for the test method precision and for adding or subtracting digits.5.1.1 For purposes of determining conformance with the specified limiting values, an observed value or a calculated value shall be rounded off “
39、to the nearest unit” in the last right-hand digit used in expressing the specified limiting value, in accordance with the rounding-off method of ASTM E 29. There are two exceptions (par. 5.13 and 5.14).5.1.2 Where test values differ between two parties, a resolution shall be in accordance with ASTM
40、D 3244 in order to determine conformance with the specified limiting values, with the criticality of the limits fixed at p = 0.5.Specified Limiting ValuesTest MethodMin. Max. ASTM15.2 Sulphur, % by mass D 1266D 2622a. Type No. 1-K Kerosene 0.04 D 4294D 54532b. Type No. 2-K Kerosene 0.30 D 7039 orCAN
41、/CGSB-3.0No. 16.05.3 Mercaptan sulphur, % by mass D 3227 (par. 5.11 and 7.1.2 )Type No 1-K Kerosene 0.003 5.4 Low-temperature flow properties, one of the following: (par. 5.12)a. Cloud point, C -40 D 25002or D 5773orb. Freezing point, C -40 D 2386 orD 597221 Unless otherwise noted.2 Referee method t
42、o be used in the event of a dispute.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB3.32007 3Specified Limiting ValuesTest MethodMin. Max. ASTM15.5 Colour (Saybolt) D 1562or (
43、par. 4.2 and 7.2.2) D 6045a. Type No. 1-K Kerosene +20 b. Type No. 2-K Kerosene3Report 5.6 Copper strip corrosion, 3 h at 50C No. 1 D 1305.7 Distillation, end point, C 300.0 D 86 (par. 5.13)5.8 Flash point, C 38.0 D 562or D 3828 (par. 5.14)5.9 Smoke point, mm 19.0 D 1322 (par. 5.15)5.10 Electrical c
44、onductivity, at point, 25 D 2624 time and temperature of delivery to purchaser, pS/m (par. 7.2.1)5.11 Mercaptan Sulphur The mercaptan sulphur determination may be waived (par. 7.1.2) if the fuel is considered negative (“sweet”) in accordance with ASTM D 4952.5.12 LowTemperature Flow Properties The k
45、erosene may be tested according to cloud point or freezing point. ASTM D 2500 shall be the referee test method for determining low-temperature flow properties.5.13 Distillation The test values shall be reported to the nearest 0.5C for manual distillation and 0.1C for automated distillation in accord
46、ance with ASTM D 86. In the event of a dispute, the automated test method shall be used as the referee test method.5.14 Flash Point The test values shall be reported to the nearest 0.5C in accordance with ASTM D 56 or D 3828, Method B. In the event of a dispute, ASTM D 56 shall be the referee test m
47、ethod.5.15 Smoke Point A comparison of ASTM D 187 and ASTM D 1322 has shown that the minimum limit of 19.0 mm specified by ASTM D 1322 is equivalent to the 16 hour requirement using ASTM D 187, as required in ASTM D 3699.6. INSPECTION6.1 Sampling 6.1.1 Sample equipment and procedures shall be design
48、ed and used to obtain representative samples of a product. Sample lines, hose volumes, etc. should be adequately flushed prior to taking a sample. Procedures shall be in accordance with ASTM D 4057, D 4177 or D 5854.6.1.2 Sample volume shall be consistent with the requirement of the testing laborato
49、ry or the authority having jurisdiction or both. Unless otherwise specified (par. 7.1.2), or the amount required is not known, a sample of at least 3 L shall be collected.3 Colour shall be determined before the addition of a dye.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproductio
