1、STD=CGSB 9.47-93-CAN/CGSB-ENGL I L87ib50 0033300 4TL CANADIAN GENERAL STANDARDS BOARD BOND PAPER FOR MAGNETIC INK CHARACTER RECOG“i0N CHEQUE PRINTING CANICGSB-9.47-93 AMENDMENT NO. 1 MODIFICATIF No 1 DecembedDcembre 1998 OFFICE DES NORMES GNRALES DU CANADA PAPIER BOND POUR LIMPRESSION DE CIXkQUES AU
2、 MOYEN DU SYSTME DE LA RECONNAISSANCE DE CARACTRES MAGNETIQUES 3. GENERAL REQUIREIWNTS EXIGENCES GN$RALES 3.6 Stock Pte Change this paragraph to read: Modifier ce paragraphe comme suit: Stock - Unless otherwise specified (par. 7.1), the paper stock shall be free from fluorescent (optical) brightener
3、s, but no paper shall be rejected because it contains a minimal quantity of such material from the use of broke or white water. The paper stock shall normally be free from more than trace amounts (less than 1%) of unbleached or mechanical pulps. The paper stock shall be free from magnetic particles.
4、 No limitation is imposed on the amount of deinked or non-deinked bleached secondary (recycled) fibre, nor on the amount of high-yield pulps present in the stock. Pte - Sauf indication contraire (par. 7.1). la pte papier doit tre exempte dagents de blanchiment fluorescents (optiques). Toutefois, auc
5、un papier ne doit tre refus en raison de la prsence de traces infimes de ces lments provenant de lutilisation de casss de fabrication et deau blanche. La pte papier ne doit normalement contenir de la pte crue ou de la pte mcanique quen quantit minime (moins de 1%). La pte papier doit tre exempte de
6、particules magntiques. Aucune limite quantitative nest impose pour les fibres secondaires (recycles) dsencres ou non, ni pour les ptes grand rendement prsentes dans la pte. 3.7 Moisture Content Teneur en eau Change this paragraph to read: Modifier ce paragraphe comme suit: Moisture Content - This pa
7、per may be used either in air-conditioned pressrooms or in pressrooms lacking relative humidity and temperature controls. Unless otherwise specified (par. 7.1), the paper at time of delivery shall be in equilibrium with a relative humidity of 40 f 5 % at a temperature of 23 f 0.5“C if the paper is t
8、o be used in an offset press, and with a relative humidity of 30 5% at a temperature of 23 f 0.5“C if the paper is for xerographic MICR usage in air-conditionned pressrooms. If specified “for use in non-air- conditionedpressrooms“ (par.7.1). the paper at time of delivery shall be in suitable equilib
9、rium with seasonally prevailing relative humidity and temperature conditions. Teneur en eau - Le prsent papier peut tre utilis dans des imprimeries climatises ou dans des imprimeries o lhumidit relative et la temprature ne sont pas contrles. Sauf indication contraire (par. 7. l), le papier, au momen
10、t de la livraison, doit tre en quilibre avec une atmosphre dont lhumidit relative est de 40 f 5% et ia temprature de 23 f 0.5“C sil est destin tre utilis dans une presse offset, et avec une humidit relative de 30 f 5 % et une temprature de 23 I: 0.5“C sil est utilis pour la xrographie MICR dans des
11、imprimeries climatises. Sil est prcis que le papier doit tre utilis dans des imprimeries non climatises (par. 7.1), il doit tre en quilibre convenable avec les conditions saisonnires dhumidit relative et de temprature qui prdominent au moment de la livraison. Copyright Canadian General Standards Boa
12、rd Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- CGSB CANICGSB- 9.47-93 * W L674650 0023692 220 NATIONAL STANDARD OF CANADA CANICGSB-9.47-93 Supersedes 9-GP-47M Bond Paper for Magnetic Ink Character Recognition Cheque Print
13、ing Canadian General Standards Board Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 9-47-93 J* The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this s
14、tandard has been developed is a government agency within the Federal Department of Supply and Services. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed
15、 of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical. professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such
16、 representatives. The Ministers Advisory Council on CGSB reviews the results of the consensus process. CGSB has been accredited by the Standards Council of Canada as a national standards-writing organization. The standards that it develops and offers as National Standards of Canada conform to the cr
17、iteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB st
18、andards and national standards developed by CGSB are develope in conformance with the policies described in the Policy Manual for the Development and Maintenance of Standards by CGSB. CGSB standards are subject to review and revision at any time, so as to ensure that they keep abreast of technologic
19、al progress. Suggestions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An upto-date listing of CGSB standards, including deta
20、ils on latest issues and amendments, and ordering instructions, will be found in the CGSB Catalogue, which is published annually and is available without charge upon request. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains th
21、e responsibility of the users of the standard to judge its suitability for their particular purpose. Many tests required by CGSB standards are inherently hazardous. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever
22、performed. CGSB takes no position respecting the validity of any patent rights asserted with any item connected with this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility . Further information on
23、 CGSB and its services and standards may be obtained from: The Director Marketing and Corporate Services Branch Canadian General Standards Board Ottawa, Canada KIA 1G6 W L874b50 0023b93 Lb7 W The STANDARDS COUNCIL OF CANADA is the Co-ordinating body of the National Standards System, a federation of
24、independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objectives of the Council are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting th
25、e health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international co-operation in the field of standards. A National Standard of Canada is a standard which has been approved by the Standards Council of Canad
26、a and one which reflects a reasonable agreement among the views of a number of capable individuais whose collective interests provide, to the greatest practicable extent, a balance of representation of producers, users, consumers and others with relevant interests, as may be appropriate to the subje
27、ct in hand. It normally is a standard that is capable of making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to the criteria and procedures established by the Standards Council of Canada. Ap
28、proval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-writing organization. Those who have a need to apply standards are encouraged to use National Standards of Canada whenever practicable. These standards are subject t
29、o periodic review; therefore, users are cautioned to obtain the latest edition from the organization preparing the standard. The responsibility for approving National Standards of Canada rests with the: Standards Council of Canada 45 OConnor Street Suite 1200 Ottawa, Ontario KIP 6N7 - (6nj 941-8704
30、by Fax - (613) 941-8705 by Mail - CGSB Sales Centre Ottawa, Canada KIA 1G6 222 Queen Street Ottawa, Ontario Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CAN/CGSB- 9-47-93 * LB
31、74b50 O023694 OT3 NATIONAL STANDARD OF CANADA CANICGSB-9.47-93 Supersedes 9-GP-47M May 1979 BOND PAPER FOR MAGNETIC INK CHARACTER RECOGNITION CHEQUE PRINTING Prepared by the Approved by the Canadian General Standards Board Na Standards Council of Canada Published September 1993 by the Canadian Gener
32、al Standards Board Ottawa, Canada K1A 1G6 Minister of Supply and Services Canada - 1993 No part of this publication may be reproduced ia any form without the prior permission of the publisher. Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduc
33、tion or networking permitted without license from IHS-,-,- CGSB CANICGSB- 9.47-73 * L874b50 0023675 T3T CANADIAN GENERAL STANDARDS BOARD I COMMITTEE ON PRINTING AND WRITING PAPERS (Membership at date of approval) Joss, R.A. Chairperson Beattie, J. Bird, A.J. Black, M. Blondin, P. Boyes, J. Chollet,
34、J .L. Chute, B. Corcoran, B. Cuibert, B. DaIfen, M.M. Dec, C. Dixon, G.C. Doane, V. Doutre, D. Douviue, L. Dub, P. Fair, D. Gildea, C. Guay, L.M. Handy, J. Hendriks, KB. Laframboise, W.C. LHeureux, L. McCanna, B.W. McLaughlin, D. Michaels, J. Miller, C. Stevenson, I. Stewart, H. Thomas, J. Udy, D.J.
35、 Waddell, B. Wood, W.R. Woodman, N. Armstrong, C. Secretary Consultant Ottawa Board of Education Du Pont Canada Inc. Mirdon Inc. Dollco Printing Provincial Papers, Division of Abitibi Price Consultant Xerox Canada Inc. Canadian Business Forms Association Inter City Papers Ud. Noranda Forest Recycled
36、 Paper Rieger Printing Ink Co. Ud. Crown Paper, Division of Crown Forest Industries Ltd. Tri-Graphic Printing (Ottawa) Ltd. Domtar Fine Papers Ud. Canada Communication Group Roiland Inc. Department of Industry, Science and Technology Weyerhaeuser Canada Ltd. E.B. Eddy Forest Products Ud. Department
37、of Energy, Mines and Resources National Archives of Canada Kruger Inc. Department of National Revenue (Customs and Excise) Repap Enterprises Inc. Ministry of Government Services, Ontario National Library of Canada Barber-Ellis Fine Papers Department of Supply and Services Canadian Pacific Forest Pro
38、ducts Ltd. Department of Public Works, Alberta Tembec Inc. Island Paper Mills Ltd. Canadian Pulp and Paper Association Canada Communication Group Canadian General Standards Board Acknowledgment is made for the French translation of this National Standard of Canada by the Translation Bureau of the De
39、partment of the Secretary of State. CAN/CGSB-9.47-93 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1. 1.1 1.2 2. 2.1 2.1.1 2.1.2 2.1.3 2.2 3. 3.1 3.2 3.3 CGSB CANiCGSB- 9-47-93 * LB
40、74650 0023696 976 m CAN/CGSB-9.47-93 Supersedes 9-GP-47M May 1979 CANADIAN GENERAL STANDARDS BOARD BOND PAPER FOR MAGNETIC INK CHARACTER RECOGNITION CHEQUE PRINTING SCOPE This standard applies to paper for printing cheques using the magnetic ink character recognition (MICR) system, and for lithograp
41、hic printing. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consul
42、t the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. APPLICABLE PUBLICATIONS The following publications are applicable to this standard: Canadian General Standards Board (CGSB) CAN
43、KGSB-9.0 - Methods of Testing Pulp and Paper: No. 5 - Brightness of Pulp, Paper and Paperboard No. 6 - Opacity of Paper No. 7 - Grammage of Paper and Paperboard. Technical Section, Canadian Pulp and Paper Association (CPPA) Standard Testing Methods: D.l - Machine Direction of Paper and Paperboard D.
44、4 - Thickness and Density of Paper and Paperboard D.9 - Internal Tearing Resistance of Paper, Paperboard and Pulp Handsheets Determined with the Appita- D.11 - Wax Test for Surface Strength of Paper D.29P - Sheffield Roughness of Paper and Paperboard. Elmendorf Instrument Canadian Payments Associati
45、on Standards and Specifications for MICR Encoded Documents. Reference to the above publications is to the latest issues unless otherwise specified by the authority applying the standard. The sources of these publications are shown in the Notes section. GENERAL REQUIREMENTS Curl - The paper shall not
46、 have more than a slight curl that can be overcome under normal commercial operating conditions. Surface Condition - The paper shall be free from blemishes, dust, lint and other particles that may adversely affect its conversion or end use. Formation - The formation of the paper shall be close and e
47、ven. 1 Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CGSB CANICGSB- 7-47-93 * 1874650 0023677 802 3.4 3.5 3.6 3.7 3.8 3.9 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 5. 5.1 Watermar
48、k - Unless otherwise specified ar. 7.1), there shall be no watermark. Trim - The paper shall be trimmed four sides with clean, smooth edges. The edges shall be straight and square and free from edge bow. Stock - Unless otherwise specified ar. 7.1), the paper stock shall be free from fluorescent (opt
49、ical) brighteners, but no paper shall be rejected because it contains a minimal quantity of such material from the use of broke or white water. The paper stock shall normally be free from more than trace amounts (less than 1%) of unbleached or mechanical pulps. The paper stock shall be free from magnetic particles and free from the surface-sizing agent polyvinyl alc
