CSN 42 5805-1987 Heads made of plates Technical delivery terms《金属板制作的盖子 技术交货条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 8040-2001 en_6291 Optics and optical instruments - Microscopes - Dimensions of tube slide and tube slot connections《光学和光学仪器.显微镜.镜筒导板和镜筒槽连接件尺寸》.pdf

BS ISO 8051-2016 en_5555 Long shank taps with nominal diameters from M3 to M10 Full-diameter shank taps with recess《标称直径从M3至M10的长柄丝锥.带凹槽的直径柄丝锥》.pdf

BS ISO 8058-1999 en_1067 Air cargo Insulated containers Thermal efficiency requirements《航空货运.隔热集装箱.热效率要求》.pdf

BS ISO 8066-2-2001 en_5633 Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a《汽车空调器用橡胶和塑料软管及软管配件.规格.制冷剂134a》.pdf

BS ISO 8068-2006 en_2868 Lubricants industrial oils and related products (class L) - Family T (turbines) - Specification for lubricating oils for turbines《润滑剂、工业润滑油和相关产品(L类)T族(涡轮).涡轮机用润滑油规范 》.pdf

BS ISO 812-2017 en_8011 Rubber vulcanized or thermoplastic Determination of low-temperature brittleness《硫化和热塑性橡胶.低温脆性的测定》.pdf

BS ISO 813-2016 en_5519 Rubber vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 peel method《硫化橡胶或热塑性橡胶.刚性体粘合强度测定.90 ℃剥离法》.pdf

BS ISO 814-2017 en_9506 Rubber vulcanized or thermoplastic Determination of adhesion to metal Two-plate method《硫化橡胶或热塑性橡胶.金属附着力的测定.双板法》.pdf

BS ISO 815-1-2014 en_7949 Rubber vulcanized or thermoplastic Determination of compression set At ambient or elevated temperatures《硫化橡胶和热塑性橡胶.压缩形变的测定.室温和更高温度》.pdf