CSN 63 1502-1988 Tyre testing Instruction for the preparation of tyres for laboratory tests《轮胎测试 实验室测试用的轮胎制备说明》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 22 1190-1984 Drills with reinforced shank Technical requirements《加强直柄钻头 技术要求》.pdf

CSN 22 1191-1974 Drills with reinforced parallel shank《带特大号模柄的直柄钻头》.pdf

CSN 22 1192-1974 Left-hand drills with reinforced parallel shank《带特大号模柄的左手直柄钻头》.pdf

CSN 22 1302-1987 Sintered carbide screw drills Technical requirements《熔结硬质合金钻头 技术要求》.pdf

CSN 22 1310-1987 Sintered carbide screw drills with parallel shank Short series Basic dimensions《带圆柱形柄的短型熔结硬质合金钻头 基本尺寸》.pdf

CSN 22 1311-1987 Sintered carbide screw drills with parallel shank Medium series Basic dimensions《带圆柱形柄的短型熔结硬质合金钻头 基本尺寸》.pdf

CSN 22 1320-1955 Drills with cylindrical shank and with sintered carbide cutting tips《钻头与圆柱柄和硬质合金板刀刃板》.pdf

CSN 22 1330-1955 Drills with conical shank and sintered carbide cutting tip《圆锥柄 硬质合金板刀刃板》.pdf

CSN 22 1371-1955 Machine reamers with conical shank and sintered carbide cutting tip《带圆锥柄的铰刀机和硬质合金板刀刃板》.pdf