CSN 72 1800 Za-1990 《修订a 4 1990捷克国家标准721800 陶瓷制品 技术要求》.pdf

相关资源

JIS A5207-2005 卫生陶瓷制品.pdf

JC T 897-2002 抗菌陶瓷制品抗菌性能.pdf

HJBZ 21-1998 低铅陶瓷制品.pdf

JC T 2022-2010 贵金属熔炼用氧化锆陶瓷制品.pdf

SJ 20389-1993 电子和电气设备用氧化铍陶瓷制品规范.pdf

GB T 3295-1996 陶瓷制品45°镜向光泽度试验方法.pdf

SN T 2794-2011 陶瓷制品微波炉耐热稳定性检测方法.pdf

SN T 3722-2013 进出口陶瓷制品放射性安全控制规范.pdf

JC T 897-2014 抗菌陶瓷制品抗菌性能.pdf

GB 12651-1990 与食物接触的陶瓷制品铅、镉溶出量允许极限.pdf

猜你喜欢

ASTM F2327-2008 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《水中油检测和监测用空中远程感应系统的选择用标准指南》.pdf

ASTM F2327-2015 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《用于监测和监视水上油的机载遥感系统选择的标准指南》.pdf

ASTM F2328-2005 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《淬火和回火的螺纹钢螺栓、螺母和螺柱的脱碳和渗碳性测定的标准试.pdf

ASTM F2328-2005(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《测定硬化和回火螺纹钢螺栓 螺钉和螺柱螺栓的脱碳和.pdf

ASTM F2328-2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328-2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328M-2007 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs [Metric]《淬火和回火的螺纹钢螺栓、螺钉和螺柱的脱碳.pdf

ASTM F2328M-2007(2013) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs (Metric)《测定公制淬火与回火螺纹钢螺栓.pdf

ASTM F2328M-2007(2014) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs &40 Metric&41 《测定公制41淬火.pdf