CSN ON 13 7031-1963 《保险阀门 Jt 6》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C186-2017 Standard Test Method for Heat of Hydration of Hydraulic Cement《水硬性水泥水合热的标准试验方法》.pdf

ASTM C1860-2018 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension《用直接拉伸法测量硅酸盐水泥基石膏抗拉强度或粘结强度的标准试验方法》.pdf

ASTM C1861-2017 Standard Specification for Lathing and Furring Accessories and Fasteners for Interior and Exterior Portland Cement-Based Plaster《室内外硅酸盐水泥基灰泥用板条和衬条附件与紧固件的标准规格》.pdf

ASTM C1861-2018 Standard Specification for Lathing and Furring Accessories and Fasteners for Interior and Exterior Portland Cement-Based Plaster《内外硅酸盐水泥基灰泥用板条和毛皮附件及紧固件的标准规范》.pdf

ASTM C1862-2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures《室温和高温下高级陶瓷管件端塞接头名义连接强度的标准试验方法》.pdf

ASTM C1863-2018 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct .pdf

ASTM C1864-2017 Standard Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer《用便携式太阳光反射计测定定向反射材料的太阳反射率的标准试验方法》.pdf

ASTM C1868-2018 Standard Practice for Ceramographic Preparation of UO2 and Mixed Oxide (U Pu)O2 Pellets for Microstructural Analysis《微观结构分析用UO2和混合氧化物(U Pu)O2芯块的磁相制备的标准实施规程》.pdf

ASTM C1869-2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites.pdf