CNS 12271-1994 Method of Test for Chlorinated Rubber Aluminum Tri - Polyphosphate Anticorrosive Primerer《氯化橡胶系三聚磷酸铝防锈底漆检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS S 153-1976 Specification - 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (1230-1430 MPa limiting ruling section 40 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件(1230-143.pdf

BS S 154-1976 Specification - 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (880-1080 MPa limiting ruling section 150 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件规范(880-10.pdf

BS S 156-1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets bars forgings and parts (1320-1520 MPa)《4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件.pdf

BS S 157-1976 Specification - 3% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1180-1380 MPa)《规范 3%镍-铬-钼表面硬化钢方坯、棒材、锻件及零件(1180-1380MPa)》.pdf

BS S 160-1990 Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa limiting ruling section 160 mm) (Cr 18 Ni 10 5 controlled nitrogen conten.pdf

BS S 162-1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock forgings bars and parts (1800 MPa double vaccuum melted)《锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MP.pdf

BS S 163-1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock forgings bars and parts (1900 MPa limiting ruling section 100 mm)《锻坯 锻件 棒材和零件用镍-铬-钼-钒钢规范(190.pdf

BS S 164-2002 1 % Chromium-molybdenum steel billets bars forgings and parts (1150 to 1300 MPa Limiting ruling section 16 mm) (Suitable for welding)《航空航天系列 1%铬-钼钢坯 棒材 锻件和部件(1150至130.pdf

BS S 532-1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening 980 1180 MPa)《铬-镍-铜-钼耐腐蚀钢薄板材和带材规范(沉淀硬化 980 1180.pdf