CNS 2060-1992 Ventilating Fan《通风电扇》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AWS B2 1-1-004-2002 Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Carbon Steel (M-1 Group 1) 18 through 10 Gauge in .pdf

AWS B2 1-1-007-2002 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Galvanized Steel (M-1) 18 through 10 Gauge in the As-Welded Condition with or wi.pdf

AWS B2 1-1-008-2002 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1 P-1 or S-1) 18 through 10 Gauge in the As-Welded Condition wit.pdf

AWS B2 1-1-011-2002 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel (M-1) 10 through 18 Gauge in the As-Welded Condition with or .pdf

AWS B2 1-1-012-2002 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 or S-1 to M-1 P-1 or S-1) 10 through 18 Gauge in the As-.pdf

AWS B2 1-1-016-1994 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 1-1 2 Inch Thick E7018 As-W.pdf

AWS B2 1-1-016-2018 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 Group 1 or 2) 1 8 inch [3 mm] through 1-1 2 inch [38 mm].pdf

AWS B2 1-1-017-1994 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 1-1 2 Inch Thick E6010 As-W.pdf

AWS B2 1-1-017-2018 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 Group 1 or 2) 1 8 inch [3 mm] through 1-1 2 inch [38 mm].pdf