CNS 3604-1988 Double (Unsymmetrical) Angle Milling Cutters《不等角铣刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 10116-1975 Refrigerating equipment OIL PANS Basic parameters《制冷设备 油底盘 基本参数 》.pdf

STAS 10117-1975 Refrigerating equipment OIL SEPARATORS Basic parameters《制冷设备 油分离器 基本参数 》.pdf

STAS 10118-1981 AIRCRAFT PRESSURE REFFUELLING CONNECTION Dimensions《飞机压力加油 连接尺寸 》.pdf

STAS 10119-1981 HIGH PRESSURE AIR CHARGING VALVES FOR AIRGRAFTS Dimensions《航空器尺寸的高压空气阀 》.pdf

STAS 10120-1975 SYSTEM OF CONE TOLERANCES FOR CONES WITH RATE OF TAPER 1 3 TO 1 500 AND LENGTHS FROM 6 TO 630 mm《圆锥率为1：3到1：500，长度由6至630mm的圆锥公差系统 》.pdf

STAS 10121-1975 CONCRETE PUMPS WITH HIDRAULIC DRIVE Basic parameters《带液压传动的混凝土泵 基本参数 》.pdf

STAS 10122-1975 WOOL Determination of alkali content《羊毛 碱含量的测定 》.pdf

STAS 10123 1-1984 Metal Welding CLASSIFICATION AND SYMBOLI- ZATION OF FLUXES FOR WELDING OF CARBON AND LOW ALLOYED STEELS《金属焊接 焊接碳和低合金钢熔剂的分类与符号化 》.pdf

STAS 10123 2-1984 Metal welding CLASSIFICATION AND SYMBOLI- SATION OF COUPLES WIRE-FLUX FOR WELDING OF CARBON AND LOW ALLOYED STEELS《金属焊接 焊接碳和低合金钢成对熔剂的分类与符号表示 》.pdf