CNS 5000-1984 Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to Coarse and Fine Pitches-Manufacturing Tolerances on the Threaded Portion《螺丝攻磨制螺纹公差（用于4H至8H及.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4999-103-2004 General requirements for rotating electrical machines - Specification for symbols《旋转电机的一般要求 符号规范》.pdf

BS 4999-140-1987 General requirements for rotating electrical machines - Specification for voltage regulation and parallel operation of a c synchronous generators《旋转电机一般要求 第140部分 交.pdf

BS 4999-145-1987 General requirements for rotating electrical machines - Specification for winding terminations《旋转电机一般要求 第145部分 绕组出线端规范》.pdf

BS 4999-147-1988 General requirements for rotating electrical machines - Specification for dimensions of brushes and brush-holders for electrical machinery《旋转电机的一般要求 电机电刷及刷握的尺寸规范》.pdf

BS 4A 100-2003 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa《航空航天系列 抗拉强度不超过1249MPa的螺栓和空转螺母的一般要求规范》.pdf

BS 4A 111-1993 Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks《具有紧公差杆的镀隔钢螺栓规范(统一六角形和统一螺纹)》.pdf

BS 4A 112-1992 Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)《镀隔钢抗剪螺栓规范(统一六角形和统一螺纹)》.pdf

BS 4A 116-2012 Steel pan head bolts (Unified threads) cadmium plated for aircraft《航空器用镀镉钢制平头螺栓(统一螺纹)》.pdf

BS 4A 169-2002 Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft《飞行器用铝合金螺栓(统一六角形和统一螺纹)》.pdf