CNS 8796-1982 Method of Test for A C Electromagnetic Switches《交流电磁开关检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 18229-2000 CAD工程制图规则.pdf

GB T 18230.1-2000 栓接结构用大六角头螺栓 螺纹长度按GB T 3106 C级 8.8和10.9级.pdf

GB T 18230.2-2000 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8 和 10.9级.pdf

GB T 18230.3-2000 栓接结构用大六角螺母 B级 8和10级.pdf

GB T 18230.4-2000 栓接结构用1型大六角螺母 B级 10级.pdf

GB T 18230.5-2000 栓接结构用平垫圈 淬火并回火.pdf

GB T 18230.6-2000 栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级.pdf

GB T 18230.7-2000 栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸) A级 9级.pdf

GB T 18231-2000 信息技术 低层安全模型.pdf