1、January 2017 English price group 24No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.020.35!%_24“2601517www.din.de
2、DIN EN 14140LPG equipment and accessories Transportable refillable welded steel cylinders for LPG Alternative design and construction;English version EN 14140:2014 + AC:2015,English translation of DIN EN 14140:2017-01FlssiggasGerte und Ausrstungsteile Ortsbewegliche, wiederbefllbare, geschweite Flas
3、chen aus Stahl fr Flssiggas (LPG) Alternative Gestaltung und Konstruktion;Englische Fassung EN 14140:2014 + AC:2015,Englische bersetzung von DIN EN 14140:2017-01quipements pour GPL et leurs accessoires Bouteilles en acier soud transportables et rechargeables pour gaz de ptrole liqufi (GPL) Autres so
4、lutions en matire de conception et construction;Version anglaise EN 14140:2014 + AC:2015,Traduction anglaise de DIN EN 14140:2017-01SupersedesDIN EN 14140:201503www.beuth.deDocument comprises 61 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considere
5、d authoritative.02.17 DIN EN 14140:2017-01 2 A comma is used as the decimal marker. National foreword This document (EN 14140:2014+AC:2015) has been prepared by CEN/TC 286 “Liquefied Petroleum Gas equipment and accessories” (Secretariat: NSAI, Ireland). The responsible German body involved in its pr
6、eparation was DIN-Normenausschuss Druckgasanlagen (DIN Standards Committee Pressurized Gas Installations), Working Committee NA 016-00-06 AA Flssiggas-Gerte und Ausrstung; Spiegelausschuss zu CEN/TC 286. Amendments This standard differs from DIN EN 14140:2007-03 as follows: a) the standard has been
7、restructured; b) requirements for hot air balloon cylinders have been added; c) the terminology has been updated; d) requirements for over-moulded cylinders have been added; e) Annex D “Environmental checklist” has been added. Based on EN 14140:2014/AC:2015, the following corrections has been made t
8、o DIN EN 14140:2015-05: Subclause 5.3.1 has been amended: in Subclause 5.3.1, the existing text has been replaced by the following text: “The shape of ends shall be such that the following conditions are fulfilled: for torispherical ends R D ; r 0,1 D ; h 4b (see Figure 1); for semi-ellipsoidal ends
9、 H 0,192 D ; h 4b (see Figure 1).” The amendment is marked in the text. The start and finish of text introduced or altered is indicated in the text by tags null null. Previous editions DIN EN 14140: 2003-11, 2007-03, 2015-03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14140 December 2014 +A
10、C May 2015 ICS 23.020.30 Supersedes EN 14140:2003+A1:2006English Version LPG equipment and accessories Transportable refillable welded steel cylinders for LPG Alternative design and construction quipements pour GPL et leurs accessoires Bouteilles en acier soud transportables et rechargeables pour ga
11、z de ptrole liqufi (GPL) Autres solutions en matire de conception et construction Flssiggas-Gerte und Ausrstungsteile Ortsbewegliche, wiederbefllbare, geschweite Flaschen aus Stahl fr Flssiggas (LPG) Alternative Gestaltung und Konstruktion EN 14140:2014 was approved by CEN on 2014-08-09 and Corrigen
12、dum AC:2015 was approved on 2015-05-13. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such
13、 national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own
14、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr
15、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN
16、G CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14140:2014 + AC:2015 EEN 14140:2014 + AC:2015 (E) 2 Contents Page European foreword .4 Introduction .5 1 Scope
17、6 2 Normative references 6 3 Terms, definitions and symbols .7 3.1 Terms and definitions .7 3.2 Symbols 9 4 Materials .9 5 Design 10 5.1 General requirements . 10 5.2 Calculation of cylindrical shell wall thickness 11 5.3 Design of torispherical and semi-ellipsoidal ends concave to pressure 11 5.4 E
18、nds of other shapes . 15 5.5 Minimum wall thickness . 15 5.6 Design of openings. 15 5.7 Valve protection 16 5.8 Non-pressure containing attachments welded to the cylinder 16 5.9 Resistance against external corrosion . 16 5.10 Over-moulded cylinders . 16 5.11 Hot air balloon cylinders 17 6 Constructi
19、on and workmanship 17 6.1 General . 17 6.2 Environment 17 6.3 Welding qualification 17 6.4 Plates and pressed parts . 18 6.5 Welded joints . 18 6.6 Tolerances . 19 6.6.1 Out-of-roundness 19 6.6.2 Straightness 19 6.6.3 Verticality . 19 6.7 Closure of openings . 20 6.8 Heat treatment . 20 7 Tests and
20、examinations . 20 7.1 General . 20 7.2 Types of test and evaluation of test results . 21 7.3 Test specimens and related tests and examinations 22 7.3.1 All cylinders . 22 7.3.2 Two-piece cylinders . 22 7.3.3 Three-piece cylinders . 23 7.3.4 Bung welds 24 7.3.5 Tensile test 24 7.3.6 Bend test 25 7.3.
21、7 Resistance to external corrosion 28 7.4 NDT . 31 7.4.1 Radiographic examination . 31 7.4.2 Macro examination . 33 DIN EN 14140:2017-01 3 7.4.3 Visual examination of the surface of the weld . 33 7.5 Prototype and production batch testing . 33 7.5.1 Burst test under pressure. 33 7.5.2 Fatigue test 3
22、4 7.5.3 Cylinder body integrity impact tests (not required for hot air balloon cylinders) 35 7.5.4 Drop tests (all cylinders except hot air balloon cylinders) . 39 7.5.5 Drop tests (hot air balloon cylinders only) . 40 8 Technical requirements for type approval 41 8.1 General . 41 8.2 Extent of test
23、ing 41 8.3 Design type variations 42 8.3.1 General . 42 8.3.2 Two piece cylinders 42 8.3.3 Three piece cylinders 42 9 Initial inspection and tests . 43 9.1 Tests and examinations applicable to all cylinders . 43 9.2 Radiographic examination 43 9.3 Macro examination 44 9.4 Examination of bung welding
24、 44 9.5 Examination of welding of non-pressure containing attachments 44 9.5.1 Macro examinations 44 9.5.2 Weld penetration requirement . 44 9.6 Unacceptable imperfections in radiographic or macro examination . 44 9.7 Production pressure test 44 9.7.1 Procedure . 44 9.7.2 Requirements . 45 9.8 Produ
25、ction batch testing (Mechanical / Burst tests) . 45 9.8.1 Production batch . 45 9.8.2 Inspection lots . 45 9.8.3 Rate of sampling 45 9.8.4 Verification of conformance with type approval 47 9.9 Failure to meet mechanical and burst test requirements . 48 9.9.1 General . 48 9.9.2 Mechanical . 48 9.9.3
26、Burst . 48 9.9.4 Production batch retest 48 9.9.5 Resubmission of production batch . 48 9.9.6 Additional checks 49 9.10 Production adhesion test for over-moulded cylinders 49 9.11 Production water absorption test for over-moulded cylinders 49 10 Marking . 50 11 Documentation 51 12 Certification 51 A
27、nnex A (normative) Additional manufacturers markings . 52 Annex B (informative) Over-moulded cylinder . 53 Annex C (informative) Hot Air Balloon Cylinders 55 C.1 Description . 55 Annex D (informative) Environmental checklist. 57 Bibliography 59 EN 14140:2014 + AC:2015 (E) DIN EN 14140:2017-01 4 Euro
28、pean foreword This document (EN 14140:2014) has been prepared by Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories“, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identica
29、l text or by endorsement, at the latest by June 2015 and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsibl
30、e for identifying any or all such patent rights. This document supersedes EN 14140:2003+A1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard has been submitted for reference into: the RID 11;
31、and the technical annexes of the ADR 12. NOTE These regulations take precedence over any clause of this European Standard. It is emphasised that RID/ADR/ADN are being revised regularly at intervals of two years which may lead to temporary non-compliances with the clauses of this European Standard. T
32、he major changes to this revision include: restructure of standard; the addition of requirements for hot air balloon cylinders; an update on the terminology; the addition of requirements for over-moulded cylinders; the addition of the environmental checklist, Annex D. According to the CEN-CENELEC In
33、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
34、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 14140:2014 + AC:2015 (E) DIN EN 14140:2017-01 5 Introduction This European Standard calls for the use of substances
35、 and procedures that may be injurious to health and/or the environment if adequate precautions are not taken. It refers only to technical suitability: it does not absolve the user from their legal obligations at any stage. It has been assumed in the drafting of this European Standard that the execut
36、ion of its provisions is entrusted to appropriately qualified and experienced people. This European Standard permits the use of new and higher strength steels and has the potential for cylinders to have a wall thickness thinner than the minimum wall thickness related to diameter, when compared with
37、cylinders in accordance with EN 1442. These changes in technology are justified by requiring a series of performance tests, including impact testing, to demonstrate the adequacy of the calculated pressure thickness for service and transport considerations Reference should also be made to EN 1439 and
38、 EN 1440, which requires the cylinder manufacturer to perform additional tests to determine the rejection limits for in-service damage and to include these limits in the documentation for the cylinder. Protection of the environment is a key political issue in Europe and elsewhere around the world. P
39、rotection of the environment in this document is understood in a very broad sense. The phrase is used, for example, in relation to the total life-cycle aspects of a product on the environment, including expenditure of energy, and during all phases of its existence, from mining of raw materials, to f
40、abrication, packaging, distribution, use, scrapping, recycling of materials, etc. Annex D comprises an environmental checklist which highlights the clauses of this European Standard that address environmental aspects. It is recommended that manufacturers develop an environmental management policy. F
41、or guidance see EN ISO 14000 series, 6, 7 and 8. Provisions need to be restricted to a general guidance. Limit values are specified in national laws. All pressures are gauged unless otherwise stated. NOTE This European Standard requires measurement of material properties, dimensions and pressures. A
42、ll such measurements are subject to a degree of uncertainty due to tolerances in measuring equipment etc. It may be beneficial to refer to the leaflet “measurement uncertainty leaflet“ SP INFO 2000 27 14. EN 14140:2014 + AC:2015 (E) DIN EN 14140:2017-01 6 1 Scope This European Standard specifies the
43、 minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 C to +65 C. It allows alternative design and cons
44、truction methods to those required in EN 1442, including coated cylinders, over-moulded cylinders and cylinders for hot air balloons. This European Standard applies only to pressure receptacles with a circular cross-section. This European Standard does not include the equipping of the cylinders with
45、 valves and other service equipment. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the ref
46、erenced document (including any amendments) applies. EN 1439, LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling EN 10028-7, Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10120, Steel sheet and strip for welded gas
47、 cylinders EN 10204:2004, Metallic products - Types of inspection documents EN 10272, Stainless steel bars for pressure purposes EN 14717, Welding and allied processes - Environmental check list EN 14894, LPG equipment and accessories - Cylinder and drum marking EN ISO 643, Steels - Micrographic det
48、ermination of the apparent grain size (ISO 643) EN ISO 2409:2013, Paints and varnishes - Cross-cut test (ISO 2409:2013) EN ISO 2812-2, Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2) EN ISO 3231:1997, Paints and varnishes - Determination of
49、 resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) EN ISO 4136, Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136) EN ISO 4624, Paints and varnishes - Pull-off test for adhesion (ISO 4624) EN ISO 5173, Destructive tests on welds in metallic materials - Bend tests (ISO 5173) EN ISO 6520-1, Welding and allied processes - Classification of geometric imper
