DIN EN 61310-2-2008 Safety of machinery - Indication marking and actuation - Part 2 Requirements for marking (IEC 61310-2 2007) German version EN 61310-2 2008《机械安全 指示、标记和驱动 第2部分 标记.pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

BS 4J 10-1991 Specification for pressure-sensitive adhesive water resistant PVC tape《耐水压敏PVC胶粘带规范》.pdf

BS 4J 11-1991 Specification for pressure-sensitive adhesive paper masking tape《压敏胶粘纸带规范》.pdf

BS 4L 54-1986 Specification for tube of 99% aluminium (cold drawn seamless tested hydraulically) (not exceeding 12 mm wall thickness)《99%铝管规范(冷拔 无缝 液压试验)(壁厚不超过12mm)》.pdf

BS 4L 56-1986 Specification for tube of aluminium-21 4% magnesium alloy (temper designation-O) (seamless tested hydraulically) (not exceeding 12 mm wall thickness)《铝-2%镁合金管规范(强度符号-.pdf

BS 4N 100-1-1999 Aircraft oxygen nsystems and nequipment — nPart 1 Design and installation《飞行器供氧系统和设备 设计和安装》.pdf

BS 4N 100-2-1999 Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen《飞行器供氧系统和设备 在有氧气情况下材料的兼容性试验》.pdf

BS 4N 100-3-1999 Aircraft oxygen systems and equipment - Testing of equipment and systems《飞行器供氧系统和设备 设备和系统的试验》.pdf

BS 4N 100-4-1999 Aircraft oxygen systems and equipment Guide to the physiological factors《飞行器供氧系统和设备 生理因素指南》.pdf

BS 4N 100-6-1999 Aircraft oxygen systems and equipment - Guidance and recommendations on the selection of materials for use with oxygen《飞行器供氧系统和设备 选择与氧一起使用的材料的指南和推荐方法》.pdf