1、October 2014Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 13.040.20!%;:“2249423www.din.deDDIN EN ISO 16000-32Indoor air Part 32: Investigation of buildings for the occurrence of pollutants(ISO 16000-32:2014);English version EN ISO 16000-32:2014,English translation of DIN EN ISO 16000-32:2014-10Innenraumluftverunreinigungen Teil 32: Untersuchung von Gebude
3、n auf Schadstoffe (ISO 16000-32:2014);Englische Fassung EN ISO 16000-32:2014,Englische bersetzung von DIN EN ISO 16000-32:2014-10Air intrieur Partie 32: Investigation sur la prsence de polluants dans les btiments(ISO 16000-32:2014);Version anglaise EN ISO 16000-32:2014,Traduction anglaise de DIN EN
4、ISO 16000-32:2014-10www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 30 pages10.14This standard has been included in the VDI/DIN Handbook on air quality, Volume 5.DIN EN ISO 16000-32:2014-10 2 A comma is used as the decimal marker. Natio
5、nal foreword International technical regulation pertaining to indoor air This document (ISO 16000-32:2014) has been prepared by Technical Committee ISO/TC 146 “Air quality”, Subcommittee SC 6 “Indoor air”, Working Group WG 19 “Investigation of buildings”. The secretariats of ISO/SC 6 and WG 19 are h
6、eld by DIN, Germany. The responsible German body involved in its preparation was the Kommission Reinhaltung der Luft (KRdL) im VDI und DIN-Normenausschuss (Commission on Air Pollution Prevention of VDI and DIN Standards Committee), Section Planung von Innenraumluftmessungen. In the German version of
7、 this document, the term “pollutant” is expressed as Schadstoff instead of (the terminologically correct) unerwnschter Stoff, because this term is commonly accepted and used in Germany. The work on this standard was done in collaboration with the VDI-Gesellschaft Bauen und Gebudetechnik (GBG), Secti
8、on Bautechnik. This document specifies the investigation of buildings for the occurrence of pollutants. Assessment and remediation of buildings are not dealt with in this document. The transportation of dangerous goods and the compliance with health and safety regulations, in particular during remed
9、iation, e.g. exposure to asbestos, is not covered by this standard. You will find several references to the relevant literature in the National Annex. General and substance-specific aspects which should be taken into account before or during measurements, as well as methods for determining individua
10、l substances or substance groups, and microorganisms in indoor air are described in the various parts of ISO 16000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such
11、patent rights. The DIN Standard corresponding to the International Standard referred to in Clause 2 of this standard is as follows: ISO 16000-1 DIN EN ISO 16000-1 National technical regulation pertaining to indoor air General conditions and other aspects to be taken into consideration when planning
12、indoor air measurements are described for individual substances and substance groups in the VDI 4300 series (see also “National Annex NA”). Many of these served as the sole basis for parts of the ISO 16000 series (e.g. ISO 16000-1, ISO 16000-2, ISO 16000-5, ISO 16000-7, ISO 16000-12, ISO 16000-15, I
13、SO 16000-16, ISO 16000-17, ISO 16000-18, ISO 16000-26 and ISO 16000-32). The specific procedures (sampling, analysis) are described in the VDI 4301 series for individual substances and substance groups. Methods which can be used for both indoor and ambient air measurements are described in further V
14、DI Guidelines. The DIN ISO 16000 series and DIN EN ISO 16000 series consist of the following parts, under the general title Indoor air: DIN EN ISO 16000-1, General aspects of sampling strategy DIN EN ISO 16000-2, Sampling strategy for formaldehyde DIN ISO 16000-3, Determination of formaldehyde and o
15、ther carbonyl compounds in indoor air and test chamber air Active sampling method DIN ISO 16000-4, Determination of formaldehyde Diffusive sampling method DIN EN ISO 16000-5, Sampling strategy for volatile organic compounds (VOCs) DIN EN ISO 16000-32:2014-10 3 DIN ISO 16000-6, Determination of volat
16、ile organic compounds in indoor and test chamber air by active sampling on Tenax TAsorbent, thermal desorption and gas chromatography using MS/FID DIN EN ISO 16000-7, Sampling strategy for determination of airborne asbestos fibre concentrations DIN ISO 16000-8, Determination of local mean ages of ai
17、r in buildings for characterizing ventilation condi-tions DIN EN ISO 16000-9, Determination of the emission of volatile organic compounds from building products and furnishing Emission test chamber method DIN EN ISO 16000-10, Determination of the emission of volatile organic compounds from building
18、products and furnishing Emission test cell method DIN EN ISO 16000-11, Determination of the emission of volatile organic compounds from building products and furnishing Sampling, storage of samples and preparation of test specimens DIN EN ISO 16000-12, Sampling strategy for polychlorinated biphenyls
19、 (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) DIN ISO 16000-13, Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PC
20、DDs/PCDFs) Collection on sorbent-backed filters DIN ISO 16000-14, Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) Extraction, clean-up and analysis by high-resolution gas chromatography/mas
21、s spectrometry DIN EN ISO 16000-15, Sampling strategy for nitrogen dioxide (NO2) DIN ISO 16000-16, Detection and enumeration of moulds Sampling by filtration DIN ISO 16000-17, Detection and enumeration of moulds Culture-based method DIN ISO 16000-18, Detection and enumeration of moulds Sampling by i
22、mpaction DIN EN ISO 16000-19, Sampling strategy for moulds DIN ISO 16000-20, Detection and enumeration of moulds Determination of total spore count DIN ISO 16000-21, Detection and enumeration of moulds Sampling from materials DIN ISO 16000-23, Performance test for evaluating the reduction of formald
23、ehyde concentrations by sorptive building materials DIN ISO 16000-24, Performance test for evaluating the reduction of volatile organic compounds and carbonyl compounds without formaldehyde concentrations by sorptive building materials DIN ISO 16000-25, Determination of the emission of semi-volatile
24、 organic compounds by building products Micro-chamber method DIN EN ISO 16000-26, Sampling strategy for carbon dioxide (CO2) DIN ISO 16000-27, Standard method for the quantitative analysis of asbestos fibres in settled dust DIN ISO 16000-28, Determination of odour emissions from building products us
25、ing test chambers DIN ISO 16000-29, Test methods for VOC detectors DIN ISO 16000-30, Sensory testing of indoor air DIN ISO 16000-31, Measurement of flame retardants and plasticizers based on organophosphorus compounds Phosphoric acid ester DIN ISO 16000-32, Investigation of constructions on pollutan
26、ts and other injurious factors Inspections The following part is planned: DIN ISO 16000-22, Detection and enumeration of moulds Molecular methods DIN EN ISO 16000-32:2014-10 4 National Annex NA (informative) Bibliography DIN EN ISO 5492, Sensory analysis Vocabulary DIN EN ISO 8589, Sensory analysis
27、General guidance for the design of test rooms DIN 50014, Climates and their technical application Standard atmospheres DIN EN ISO 8199, Water quality General guidance on the enumeration of microorganisms by culture DIN EN ISO 9169, Air quality Definition and determination of performance characterist
28、ics of an automatic measuring system DIN ISO 12219-1, Indoor air of road vehicles Part 1: Whole vehicle test chamber Specification and method for the determination of volatile organic compounds in cabin interiors DIN ISO 12219-2, Indoor air of road vehicles Part 2: Screening method for the determina
29、tion of the emissions of volatile organic compounds from vehicle interior parts and materials Bag method DIN ISO 12219-3, Indoor air of road vehicles Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials Micro-scale ch
30、amber method DIN ISO 12219-4, Indoor air of road vehicles Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials Small chamber method DIN ISO 12219-5, Indoor air of road vehicles Part 5: Screening method for the determi
31、nation of the emissions of volatile organic compounds from vehicle interior parts and materials Static chamber method DIN ISO 12884, Ambient air Determination of total (gas and particle phase) polycyclic aromatic hydro-carbons Collection on sorbent-backed filters with gas chromatographic/mass spectr
32、ometric analysis DIN V ENV 13005, Guide to the expression of uncertainty in measurement DIN EN 14412, Indoor air quality Diffusive samplers for the determination of concentrations of gases and vapours Guide for selection, use and maintenance DIN EN ISO 16017-1, Indoor, ambient and workplace air Samp
33、ling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 1: Pumped sampling DIN EN ISO 16017-2, Indoor, ambient and workplace air Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatog
34、raphy Part 2: Diffusive sampling DIN ISO 16362, Ambient air Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography DIN EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories DIN 18007:2000-05, Demolition w
35、orks Concepts, procedures, fields of application DIN 18299:2010-04, German construction contract procedures (VOB) Part C: General technical specifications in construction contracts (ATV) General rules applying to all types of construction work DIN EN ISO 16000-32:2014-10 5 BGR 128:2006-02, Kontamini
36、erte Bereiche (Contaminated areas) German employers liability insurance association regulation 128 (working in contaminated areas) VDI 2464 Part 1, Ambient air measurement Indoor air measurement Measurement of polychlorinated biphenyls (PCBs) GC/MS method for PCB 28, 52, 101, 138, 153, 180 VDI 2464
37、Part 2, Ambient air measurement Indoor air measurement Measurement of polychlorinated biphenyls (PCBs) HR-GC/HR-MS method for coplanar PCBs VDI 2464 Part 3, Ambient air measurement Indoor air measurement Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/M
38、S VDI 3484 Part 1, Gaseous ambient air measurements Indoor-air pollution measurements Test gases measurements Measurement of the formaldehyde concentration with the sulfite pararosaniline method VDI 3484 Part 2, Gaseous ambient air measurements Indoor-air pollution measurements Measurement of the fo
39、rmaldehyde concentration with the acetylacetone method VDI 3492:2011-12 (Draft), Indoor air measurement Ambient air measurement Measurement of inorganic fibrous particles Scanning electron microscopy method VDI 3498 Part 1, Ambient air measurement Indoor air measurement Measurement of polychlorinate
40、d dibenzo-p-dioxins and dibenzofurans Method using large filters VDI 3498 Part 2, Ambient air measurement Indoor air measurement Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans Method using small filters VDI 4252 Part 2, Measurement of airborne microorganisms and viruses in ambien
41、t air Active sampling of bioaerosols Separation of airborne mould on gelatine/polycarbonate filters VDI 4253 Part 2, Measurement of airborne microorganisms and viruses in ambient air Culture based method for the determination of the concentration of mould in air Indirect method after sampling with g
42、elatine/polycarbonate filters VDI 4300 Part 1, Indoor-air pollution measurement General aspects of measurement strategy VDI 4300 Part 2, Indoor-air pollution measurement Measurement strategy for polycyclic aromatic hydro-carbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibe
43、nzofurans (PCDFs) and polychlorinated biphenyls (PCBs) VDI 4300 Part 4, Indoor-air pollution measurement Measurement strategy for pentachlorophenol (PCP) and -hexachlorocyclohexane (lindane) in indoor air VDI 4300 Part 5, Indoor-air pollution measurement Measurement strategy for nitrogen dioxide (NO
44、2) VDI 4300 Part 6, Measurement of indoor-air pollution Measurement strategy for volatile organic compounds (VOCs) VDI 4300 Part 7, Indoor-air pollution measurement Measurement of indoor air change rate VDI 4300 Part 8, Measurement of indoor-air pollution Sampling of house dust VDI 4300 Part 9, Meas
45、urement of indoor-air pollution Measurement strategy for carbon dioxide (CO2) VDI 4300 Part 10, Measurement of indoor-air pollution Measurement strategies for determination of mould fungi in indoor environment VDI 4300 Part 11, Measurement of indoor-air pollution Measurement strategies for determina
46、tion of air-borne particles in indoor environment Particles with equivalent diameter 2,5 m VDI 4301 Part 1, Indoor-air pollution measurement Determination of the concentration of nitrogen dioxide Manual photometric method (Saltzman) DIN EN ISO 16000-32:2014-10 6 VDI 4301 Part 2, Indoor-air pollution
47、 measurement Measurement of pentachlorophenol (PCP) and -hexachlorocyclohexane (lindane) GC/MS-method VDI 4301 Part 3, Measurement of indoor-air pollution Measurement of pentachlorophenol (PCP) and -hexachlorocyclohexane (lindane) GC/ECD method VDI 4301 Part 4, Measurement of indoor-air pollution Me
48、asurement of pyrethroids and piperonyl butoxide in air, house dust and solvent wipe samples VDI 4301 Part 5, Measurement of indoor-air pollution Measurement of flame retardants and plasticizers based on phosphor organic compounds Phosphoric acid ester VDI 4301 Part 6, Measurement of indoor-air pollu
49、tion Measurement of phthalates with GC/MS The following VDI Guidelines are under preparation: VDI 4301 Part 7, Measurement of indoor-air pollution Measurement of carboxylic acids VDI 2464 Part 4, Ambient air measurement Indoor air measurement Measurement of persistent, semi-volatile organic halogen compounds TRGS 519:2007-03, A
