1、ICS 85.040Pulps Preparation of laboratory sheets for physical testingPart 1: Conventional sheet-former method(ISO 5269-1:2005)English version of DIN EN ISO 5269-1Faserstoffe Laborblattbildung fr physikalische Prfungen Teil 1: Konventionelles Blattbildungsver-fahren (ISO 5269-1:2005)A comma is used a
2、s the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 172 Pulp, paper andboard (Secretariat: Germany) to adopt, without alteration, International Standard ISO 5269-1 as a EuropeanStandard.The responsible German body involved in its prepa
3、ration was the Normenausschuss Materialprfung(Materials Testing Standards Committee), Technical Committee Physikalisch-technologische Prfverfahrenfr Papier, Pappe.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:ISO 187 DIN EN 20187ISO 33
4、10-1 DIN ISO 3310-1ISO 5263-1 DIN EN ISO 5263-1ISO 5263-2 DIN EN ISO 5263-2ISO 5263-3 DIN EN ISO 5263-3ISO 5264-2 DIN EN ISO 5264-2ISO 8787 DIN ISO 8787AmendmentsThis standard differs from the October 2000 edition in that it has been editorially revised and the referencesto standards have been updat
5、ed.Previous editionDIN EN ISO 5269-1: 2000-10.DEUTSCHE NORM May 2005DIN EN ISO 5269-1 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standard
6、s (DIN-Normen).English price group 9www.din.dewww.beuth.de9649900Continued overleaf.Document comprises 10 pages.08.05G4G15G70G106G6G5Supersedes October 2000edition.National Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN EN 20187 Paper, board and pulps Sta
7、ndard atmosphere for conditioning and testing andprocedure for monitoring the atmosphere and conditioning of samplesDIN EN ISO 5263-1 Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps(ISO 5263-1:2004)DIN EN ISO 5263-2 Pulps Laboratory wet disintegration Part 2: Disintegrat
8、ion of mechanical pulps at 20 C(ISO 5263-2:2004)DIN EN ISO 5263-3 Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at” 85 C (ISO 5263-3:2004)DIN EN ISO 5264-2 Pulps Laboratory beating Part 2: PFI mill method (ISO 5264-2:2002)DIN ISO 3310-1 Test sieves Technical requirem
9、ents and testing Part 1: Test sieves of metal wire cloth(ISO 3310-1:2000)DIN ISO 8787 Testing of paper and board Determination of capillary rise Klemm method(ISO 8787:1986)Page 2DIN EN EN 5269-1:2005-05English versionICS 85.040Pulps Preparation of laboratory sheets forphysical testingPart 1: Convent
10、ional sheet-former method(ISO 5269-1:2005) 2005. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 5269-1:2005 EFaserstoffe Laborblattbildung frphysikalische Prfungen Teil 1:Konventionelles Blattbildungsver-fahren (ISO 5269-1:2005)
11、This European Standard was approved by CEN on 2004-12-23.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references c
12、oncerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own la
13、nguage and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M
14、alta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN ISO 5269-1February 2005Management Centre: 36, rue de Stassart, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPte
15、s Prparation des feuilles delaboratoire pour essais physiques Partie 1: Mthodes de la formetteconventionnelle (ISO 5269-1:2005)Supersedes EN ISO 5269-1:2000.Page 2EN ISO 5269-1:2005ForewordInternational StandardISO 5269-1:2005 Pulps Preparation of laboratory sheets for physical testing Part 1: Conve
16、ntional sheet-former method,which was prepared by ISO/TC 6 Paper, board and pulps of the International Organization for Standardization,has been adopted by Technical Committee CEN/TC 172 Pulp, paper and board,” the Secretariat of which is heldby DIN, as a European Standard.This European Standard sha
17、ll be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by August 2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countri
18、es are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switz
19、erland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 5269-1:2005 was approved by CEN as a European Standard withoutany modification.23334456667788Page 3EN ISO 5269-1:2005Page 4EN ISO 5269-1:2005Page 5EN ISO 5269-1:2005Page 6EN ISO 5269-1:2005Page 7EN ISO 5269-1:2005Page 8EN ISO 5269-1:2005
