1、ICS 25.160.30Wassergekhlte Sekundranschlusskabel fr das Widerstands-schweien Teil 1: Abmessungen und Anforderungen frZweileiter-Anschlusskabel (ISO 8205-1 : 2002)European Standard EN ISO 8205-1 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standa
2、rd has been published in accordance with a decision taken by CEN/TC 121 to adopt, withoutalteration, International Standard ISO 8205-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Schweitechnik(Welding Standards Committee), Technical Committe
3、es Widerstandsschweieinrichtungen.AmendmentsThis standard differs from the February 1997 edition as follows:a) The scope has been extended to cover cables with a cross-sectional area of150 mm2and a length of 1500 mm.b) Colour coding is no longer specified.c) Some editorial amendments have been made.
4、Previous editionsDIN 44772-1: 1980-01; DIN EN ISO 8205-1: 1997-02.Ref. No. DIN EN ISO 8205-1 : 2003-07English price group 07 Sales No. 110711.03DEUTSCHE NORM July 2003EN ISO 8205-1Continued overleaf.EN comprises 7 pages. No part of this standard may be reproduced without the prior permission ofDIN D
5、eutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Water-cooled secondary connection cables forresistance weldingPart 1: Dimensions and requirements for double-conductor connection cables(ISO 8205-1 :
6、 2002)English version of DIN EN ISO 8205-1Supersedes February 1997 edition.English versionICS 25.160.30Descriptors:Water-cooled secondary connection cables forresistance weldingPart 1: Dimensions and requirements for double-conductor connection cables(ISO 8205-1 : 2002) 2002. CEN All rights of explo
7、itation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 8205-1 : 2002 EWassergekhlte Sekundranschluss-kabel fr das Widerstandsschweien Teil 1: Abmessungen und Anforderun-gen fr Zweileiter-Anschlusskabel(ISO 8205-1 : 2002)This European Standard was approved by
8、CEN on 2002-06-24.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may
9、be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management C
10、entre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden,Switzerland, and the United K
11、ingdom.EN ISO 8205-1August 2002Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Cbles secondaires refroidis par eaupour le soudage par rsistance Partie 1: Dimensions et exigencespour cbles deux co
12、nducteurs(ISO 8205-1 : 2002)Supersedes EN ISO 8205-1 : 1996.Page 2EN ISO 8205-1 : 2002ForewordInternational StandardISO 8205-1 : 2002 Water-cooled secondary connection cables for resistance welding Part 1: Dimensionsand requirements for double-conductor connection cables,which was prepared by ISO/TC
13、 44 Welding and allied processes of the International Organization forStandardization, has been adopted by Technical Committee CEN/TC 121 Welding, the Secretariat of which isheld by DS, as a European Standard.This European Standard shall be given the status of a national standard, either by publicat
14、ion of an identical textor by endorsement, and conflicting national standards withdrawn, by February 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgi
15、um, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 8205-1 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 8205-1 : 2002Page 4EN ISO 8205-1 : 2002Page 5EN ISO 8205-1 : 2002Page 6EN ISO 8205-1 : 2002Page 7EN ISO 8205-1 : 2002
