1、 AMSC N/A FSC 8465 A-A-59898 August 7, 2012 COMMERCIAL ITEM DESCRIPTION ASCENDER, MECHANCIAL REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requiremen
2、ts for a kit that replaces a complete set (Type I and II) of mechanical ascenders that are issued in the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The Ascender, Mechanical Single Pack will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the fol
3、lowing items in the following quantities as listed in Table I: TABLE I. List of items in kit 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number
4、/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specification (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountain
5、eering Federation Standards, where applicable. Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of thi
6、s address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name Commercial Item Description # Type Quantity Ascender, Mechanical A-A-59841 I 1 Ascender, Mechanical A-A-59841 II 1 METRIC Provided by IHSNot for Re
7、saleNo reproduction or networking permitted without license from IHS-,-,-A-A-59898 2 3.4 Materials. Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Ascender, Mechanical Single Pack shall conform to the quality of product established
8、by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Ascender, Mechanical Single Pack shall have no unexpected material
9、 or component failures during a continuous one-year cycle. The Ascender, Mechanical Single Pack shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requ
10、irements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Ascender, Mechanical, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the
11、 printing for the identification label: ASCENDER, MECHANCIAL REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the prod
12、uct d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more tha
13、n one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. R
14、ecycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product
15、conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59898 3 standards, and quality a
16、ssurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Exa
17、mine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall b
18、e as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelph
19、ia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial
20、 Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I, to determine the required items for the replacement ki
21、t that corresponds to A-A-59834, Anchor, Rock, Chock, listed below: NSNs TYPE 8465-01-579-3239 I 8465-01-579-3245 II Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59898 4 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACT
22、IVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-008 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
