1、MIL-C-35065J 83 W 777770b O433228 7 W . MIL-C-15065 J 16 February 1990 SUPERSEDING MIL-C- 15065H 29 December 1986 MILITARY SPECIFICATION COAT FRONTS This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This document covers coat fron
2、t interlinings for coats and overcoats. 9; 1.2 Classification. The coat fronts shall be of sizes as specified in 3.4.2 and 6.2 and of the following types (see 6.2): Type I - For Coa?s, Mens, Tropical and Serge, Polyester/Wool, Army Green 344 (Army) Type II - Deleted Type III - (Army) Type IV - For C
3、oats, Womens Wool and Polyester/Wool (Army) Type VI - For Coat, Mans, Polyester/Wool (Navy); Coat, Mans, For Overcoat, Mans, Army Green 44, with Removable Liner Wool, Winter (Navy) Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving thi
4、s document should be addressed to: U.S. Army Natick Research, Development, and Engineering Center, Natick, MA 01760-5014 by using the self- addressed Standardization Document .Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8315 DISTRIBUTION STATE
5、MENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesMIL -C - 1 5 O 6 5 J Type VI1 - For niform, Mans, Aviation Working (Green) (Single Breasted) (Navy) Type VI11 - Deleted Type IX - For Coat, Mans Service, Polyester/Wool, Green (with Belt) (MC) Ty
6、pe x - For Coat, Mans Service, Winter, Wool, Green; and Coat, Mans, Wool, Serge, Green (with Belt) (MC) Type XI - For Coat, Mans, Wool Gabardine, Blue Dress (MC) Type XII - For Overcoat, Mants, Wool, Serge, Green; or Gabardine, Blue (MC) Type XII1 - For Coats, Womens, Wool, Serge, Green 2207, and Wo
7、ol, Elastique, Dark Blue 2309; and Coat, Womans, Wool, Gabardine, Blue (MC) Type XIV - For Overcoat, Mans (Officers Type) (Navy) Type XV - For Coat, Womans, Polyester/Wool, Green 2241 (MC) Type XVI - For Coat, Womans, Blue Dress (Navy) Type XVII - For Coat, Mans, Polyester/Wool, Serge (CG) Type XVII
8、I - For Coat, Mens, Tropical and Serge, Polyester/Wool, Army Green 344, Fusible (Army) Type XIX - For Overcoat, Mans, Enlisted (Navy) Type XX - For Overcoat, Womans, Enlisted (Navy) Type XXI - Coat, Womans, Dress (CG) Type XXII - Topcoat, Mans, Polyester, Elastique (CG) Type XXIII - Overcoat, Mans,
9、Reefer (CG) Type XXIV - Uniform, Woman s , Aviation, Working, Green (Navy) Type XXV - For Coat, Womans, Classic Design, Polyester/Wool, AG-344, Fusible (Army) 2 Licensed by Information Handling ServicestlLL-C-15065J 3 9799906 OL113230 5 W _ MIL-C-15065 J 2. APPLICABLE DOCUMENTS 2.1 Government docume
10、nts. 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Speci
11、fications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDE RAL A-A-203 - Paper, Kraft, Untreated C-F-206 - Felt Sheet: Cloth, Felt, Wool, Pressed V-T-276 - Thread, Cotton CCC-C-458 - Cloth, Flannel, Cotton DDD-L -20 - Label: For Clothing, Equipa
12、ge, and Tentage, PPP-B-636 - Boxes, Shipping, Fiberboard (General Use) MILITARY MIL-C-297 - Cloth, Interlining, Cotton or Synthetic Warp, MIL-C-4371 8 - Cloth, Polyester; Polyester and Cotton; and Spun Hair-Wool or Rayon Filling Polyester and Rayon, for Pockets STANDARDS FEDERAL FED-STD-191 FED-STD-
13、75 1 MILITARY MIL 4TD- 105 MIL -STD- 12 9 MIL -STD- 1 4 7 MIL -ST D-7 3 1 - Textile Test Methods - Stitches, Seams, and Stitchings - Sampling Procedures and Tables for Inspection - Marking for Shipment and Storage - Palletized Unit Loads - Quality of Wood Members for Containers and Pallets by Attrib
14、utes (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, Bldg-4D, 700 Robbins Avenue, Philadelphia, PA 1911-5094). 3 Licensed by Information Handling ServicesMIL-C-L5065J 83 7977706 OYL323L
15、7 M MIL -C- 15065 J 2.1.2 Other Government docwnents,.drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. are those cited in the solicitation. Unless otherwise specified, the issues CODE OF FEDE
16、RAL REGULATIONS Title 9 - Animal and Animal Products Part 95 - Sanitary Control of Animal By-Products (The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. W
17、hen indicated, reprints of certain regulations may be obtained from the Federal agency responsible for issuance thereof. * 2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents whi
18、ch are DoD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 3951 .- Stan
19、dard Practice for Commercial Packaging (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) THE COLOR ASSOCIATIOM OF THE UNITED STATES Standard Color Card of America Department of Defense Standard Color Card fo
20、r Sewing Threads (Color cards may be available from the Color Association of the United States, 10016-0927. 343 Lexington Avenue, New York, NY available from the Color Association, individual color samples may be obtained from the contracting activity or as directed by the contracting activity.) If
21、color cards are not (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conf
22、lict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, ,however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 4 Licensed by Information Handling ServicesMIL-C-LSObSJ 83
23、 m 7779706 0433232 9 _ m MIL -C- 150 65 J 3. REQUIREMENTS * 3.1 First article. When specified (see 6.21, a sample shall be subjected to first article inspection (see 6.3) in accordance with 4.3. 3.2 Samples. Samples, when furnished, are solely for guidance and information to the contractor (see 6.4)
24、. appear in the sample, in which case this specification shall govern. Variation from this specification may 303 Material. It is encouraged that recycled material be used when practical as long as it meets the requirements of this specification. * 3.3.1 Basic material. The materials for coat fronts
25、shall be cotton warp and spun hair-wool filling interlining cloth conforming to MIL-C-297 in the types and classes indicated below. For types IV and VI1 coat fronts, the material shall conform to class 1 (natural). option for type IV coat front, the material shall conform to class 2 (dyed For all ot
26、her type coat fronts, and as an black). Coat front types I, IX, xv, XVI IV III, VI, VII, x, XI, XII, XVII, XIX, xx, XXI, XXII 0 XXIV Floating chest piece type XVIII Cloth (type and class from MIL-C-297) Type III, class 2 Type III, class 1 or class 2 XIII, XIV, XXIII, xxv Type I, class 2 Type III, cl
27、ass 1 Type I, class 1 and 2 * 3.3.2 Haircloth. The material for the shoulder pieces (types IV, VI, VII, XIV, XVII, XVIII and XXII), chest pieces and reinforcement piece for top front corners (type XI shall be 2-ply cotton warp and natural horsehair filling cloth, undyed, having not less than 60 ends
28、 and 40 picks per inch, weighing not less than 4.5 ounces per square yard, and containing no sizing (see 4.4.1.1). An alternate for types VI, XVIII, XIX, and XXI shoulder piece may include fabric having warp yarns made from 100 percent cotton, from 100 percent polyester, from any combination of poly
29、ester and cotton, or from 45 to 100 percent polyester with the remaining percentage rayon. The filling yarns of the alternate fabric shall be made from 100 percent nylon mono-filament. The fabric shall contain not less than 50 ends and 42 picks per inch, and shall weigh not less than 5.6 ounces per
30、square yard (see 4.4.1.1). The stiffness of the nylon filling shall be 0.060 to 0.14 load pound (see 4.4.1.1). The horsehair shall meet current Quarantine Laws and pertinent regulations of the U.S. Department of Agriculture as set forth in the Code of Federal Regulations (see 2.1.2). 5 Licensed by I
31、nformation Handling Services- _. . MIL-C-L5065J 83 W 7777706 Oq33233 O MIL -C-15065 J * 3.3.3 Polyester and cotton cloth. The material for the components listed in table I shall be polyester and cotton cloth undyed or in colors as indicated, conforming to class 1 of MIL-C-43718. TABLE I. Polyester a
32、nd cotton cloth components X Component Types) III, IV, VI, XVI, XVII XII1 I VII, and XN and XXI XI XII and XV Stays: (undyed or black) (undyed ) Chest piece bottom covering: (undyed) Top front corner reinforcement covering : (undyed) X - - X - - - x- X X X * 3.3.4 Padding. The padding for chest (typ
33、es I, III, VI, IX, X, XI, XII, XIII, XV, XVII, XVIII, and XXII) shall be either felt or flannel. for chest (types VII, XIV, XIX, XX, XXI, XXIV, and XXV) and for shoulder (types IV and XVI) shall be felt. The padding 3.3.4.1 - Felt. The felt shall be pressed wool conforming to type III (roll- felt),
34、classification 11A2 of C-F-206. 3.3.4.2 Flannel. The flannel shall be unbleached, double-napped, conforming to type II, class 1 of CCC-C-458. 3.3.5 Labels. Each coat front shall have an identification label (applicable only when coat fronts are purchaseddirectly by the Government) and a size label c
35、onforming to DDD-L-20. shall apply. The fastness to drycleaning requirements of DDD-L-20 3.3.5.1 Identification label. The identification label shall be applied directly above the size label and shall conform to type IV, class 1, except that the characters of the inscription shall be not less than l
36、/4 inch in height. 6 Licensed by Information Handling ServicesMIL-C-LS065J 83 777770b 0433234 2 W MIL 4- 15065 J -. 3.3.5.2 Size label. The size label shall be applied to the bottom end of each left and right front and shall conform to type IV, class 2, except that the O characters of the inscriptio
37、n shall be not less than 3/8 inch or more than 5/8 inch in height. followed by S for short, R for regular and L for long. In addition, each coat front shall be labeled to indicate the left front and the right front by preceding the size designation with the letters LT for left and RT for right as sh
38、own in the following examples: The size label shall include the numerical designation LT 38R RT 38R 3.3.6 Thread. The thread for seaming and stitching the fronts shall be cotton, soft finish, type IA1 or type IA2, shade White AH, C.A. 66050, ticket No. 50 or 70, 2-ply, conforming to V-T-276. 3.4 Pat
39、terns. * 3.4.1 Pattern parts. The component parts of the fronts shall be cut from specified materials in accordance with pattern parts indicated in table II. TABLE II. List of pattern parts Component Pattern nomenclature Cut parts O Basic material Felt OF flannel Basic material Type 1 Right front Le
40、ft front Chest piece Wedge piece (shoulder dart) Chest padding Type III Front Chest pie ce Wedge piece (shoulder dart) Felt or flannel Chest padding Basic material r Type IV Front Side front 7 2 2 2 2 2 2 2 Licensed by Information Handling Services- c- MIL-C-35065J 3 7777706 ClLi33235 Li MIL-C-15065
41、 J TABLE II. List of pattern parts (contd) Component Pattern nomenclature Cut parts Felt Haircloth Basic material Felt or flannel Haircloth (or alternate for type VI see 3.3.2) Basic material Felt Hai rolo th Basic material Hair cloth Felt or flannel Type IV (contd) Front shoulder piece Shoulder pad
42、ding 2 2 Shoulder piece 2 Types VI, XVII, XXII, and XXIII Front 2 Chest piece 2 Wedge piece (shoulder dart) 2 Chest padding (type XXIII flannel only) 2 Shoulder piece 2 Types VI1 and XIV Front 2 Side front 2 Front chest 2 Side chest 2 Reinforcement piece 2 Chest padding 2 Shoulder piece 2 Types IX a
43、nd X Front Chest piece Wedge piece (shoulder) Shoulder piece Che s t padding 2 2 4 2 2 8 Licensed by Information Handling ServicesMIL-C-15065J 83 m b Oq3323b b W MIL-C- 15065 J TABLE II. List of pattern parts (contd) Component Pattern nomenclature Cut parts Basic material Hai rcloth Felt or flannel
44、Polyester and cotton cloth Basic material Polyester and cotton cloth Felt or flannel Basic material Basic material Felt Type XI Right front Left front Right chest piece Left chest piece Top front corner reinforcement Right chest padding Left chest padding Top front corner reinforcement and Chest pie
45、ce bottom edge covering Dart stay chest piece front covering Type XII Right front Left front Chest piece Shoulder dart stay Neck dart stay Chest padding Types XII1 and XV Front Side front Type XVI Front Side front Shoulder. padding 1 1 1 1 2 1 1 2 2 2 1 1 2 2 2 2 2 2 2 2 2 Haircloth Shoulder piece 2
46、 9 Licensed by Information Handling ServicesMIL-C-LSObSJ 3 777770b OqL3237 = MIL-C- 15065 J TABLE II. List .of pattern parts (contd) Component Pat tern nomenclature Cut parts Type XVIII Basic material Chest piece Felt or flannel Chest padding Haircloth (or alternate Shoulder piece Shoulder reinforce
47、ment piece Type XIX see 3.3.2) Basic material Front Chest piece Felt Chest padding 2 2 2 Haircloth (or alternate Shoulder piece see 3.3.2) Type XX Basic material Front Felt Chest padding Type XXI Basic material Front Felt Chest piece Haircloth (or alternate Shoulder piece see 3.3.2) .Type XXIV Basic
48、 material Felt Front Chest piece Chest padding TO 2 2 2 2 2 2 Licensed by Information Handling ServicesMIL -C- 15065 J TABLE II. List of pattern parts (contd) Component Pattern nomenclature Cut parts Type XXV Basic material Chest piece interlining Shoulder wedge Shoulder piece interlining 2 2 2 ,Fel
49、t Shoulder piece 2 3.4.2 Sizes. The coat fronts shall conform to the sizes specified in the applicable end item specification or procurement document and shall be fabricated in accordance with the standard patterns applicable thereto. 3.4.3 Coat fronts purchased by an end item manufacturer. When coat fronts are purchased by an end item manufacturer as a component of an end item, standard patterns of the coat fronts will be furnished by the Government (see 6.2). working patterns. The working patterns shall be identical to the Government
