1、nIL-C-23070B (1) m 7999906 2014517 bOT m MIL-C-23070B AMENDMENT 1 13 November 1995 MILITARY SPECIFICATION CLOTH, LAMINATED, AND TAPE, COATED CLOTH POLYISOPFCENE, NATURAL OR SYNTHETIC, RUBBER ON NYLON This amendment forms a part of MIL-C-23070B, dated 30 August 1972, and is approved for use by all De
2、partments and Agencies of the Department of Defense. PAGE 2 2.1 Under Specifications, Military, line 1, delete “MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. After paragraph 2.1, add the following paragraph: 2.2 Non-Government uublications. The following document forms a
3、 part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of the documents not listed in the DoDISS are the issues
4、of the documents cited in the solicitation (see 6.2). ANSUASQC 21.4 - Sampling Procedures and Tables for Inspection by Attributes (Application for copies should be addressed to American National Standards Insti- tute, 1430 Broadway, New York, NY 10018-3308). PAGE 4 3.3 Color, Delete paragraph in its
5、 entirety and substitute the following: “3.3 Color. The color of the finished laminated cloth and the coated tape shall be as specified by the pro- curing activity and shall conform to applicable color chips in FED-STD-595 (see 4.5.4 and 6.2). The procuring activity will select color chip 32246, Lus
6、terless Orange; color chip 35042, Lusterless Blue; or color chip 33538, Lusterless Yellow for the straight ply side of the laminated cloth unless otherwise specified (see 6.2 (c). The color on the opposite side of the laminated cloth shall be identical to the color selected for the straight ply side
7、. The uncured gum coating on the tape shall not be pigmented.“ AMSC N/A 1 of2 FSC 8305 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-23070B AMENDMENT 1 PAGE 9 3
8、.10 Workmanship, line 4, Delete, “The occurrence of defects shall not exceed the speci- fied acceptable quality levels specified herein.“ PAGE 10 4.3 Insaection, line 2, delete “MIL-STD-105“ and substitute “ANSUASQC 21.4“. PAGE 11 4.3.2.1 Yard-by-vard examination of laminated cloth, line 6, delete,
9、“The acceptable quality level (AQL) for this examination shall be 4.0 defects per 100 units (yards).“ Line 8, delete “MIL-STD-105“, and substitute “ANSUASQC Z1.4“. 4.3.2.2 Examination of coated cloth tape, line 2, delete MIL-STD-105“, and substitute “ANSUASQC Z1.4“. Line 3, delete, “the acceptable q
10、uality level shall be 1 .O defects per units (yards).“ PAGE 19 6.2 Ordering data, line 5, delete, “(c) Color required (see 3.3)., and substitute, (c) Color required on straight ply side, and if different, the color required on the bias ply side (3.3).“ Add to end of paragraph, “(j) Issue of DoDISS t
11、o be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.2)“. Custodians Air Force - 99 Navy - AS Army - GL Preparing Activity: DLA - CT Project No. 8305-0594 Review activities Air Force - 31,32,45,82 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
