1、AMSC N/A FSC 5935 MIL-DTL-641/5E 18 October 2013 SUPERSEDING MIL-J-641/5D 03 July 1973 DETAIL SPECIFICATION SHEET JACKS, TELEPHONE TYPES JJ-033 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described he
2、rein shall consist of this specification sheet and MIL-DTL-641. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Jacks may be multiple mounted on a panel, with a 1.125 inch minimum distance allowed from center-to-center in a circular direction. 4. Design o
3、f locating lug is optional. FIGURE 1. Dimensions and configuration. Inches mm Inches mm Inches mm .002 0.05 .062 1.57 .531 13.49 .005 0.13 .093 2.36 .625 15.88 .010 0.25 .094 2.39 .728 18.49 .015 0.38 .210 5.33 .781 19.84 .016 0.41 .281 7.14 .977 24.82 .020 0.51 .375 9.53 1.047 26.59 .047 1.19 .500
4、12.70 1.125 28.58 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-641/5E 2 REQUIREMENTS: Dimensions and configuration: See figure 1. Insertion and withdraw forces shall be as follows. Insertion force - 6 pounds (maximum). Withdraw
5、force - 1.5 pounds (minimum). - 5 pounds (maximum). Spring life test is applicable. Test plug TP68, in accordance with MIL-DTL-641, shall be used. Terminals shall be of the solder-lug type. Configuration and design are optional. The Part or Identifying Number (PIN) consists of the letter M, the basi
6、c specification number, the specification sheet number, and a number for jack type. (see table I) M 641 /5 - 1 Type designation Specification sheet number Specification number M prefix PIN example: M641/5-1 indicates type JJ-033 telephone jack. TABLE I. PIN. Marginal notations are not used in this r
7、evision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-641. Dash number Type Connection Mounting Switching action upon insertion of plug 1 JJ-033 Tip, ring, and sleeve Bushing None Provided by IHSNot for
8、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-641/5E 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy EC Air Force 85 (Project 5935-2013-031) DLA - CC Review activities: Army AR, AT, CR4, MI Navy AS, MC, OS, SH Air Force 11, 19, 99 NOT
9、E: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
