1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, THREADED COUPLING, CRIMP SOCKET CONTACT), (SERIES III, CLASSES A, G, K, M, N, R, S, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department o
2、f Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Classes A, G, K, M, R, T, W and Z. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/82E 19 August 2009 SUPERSEDING MIL-C-83723/82D 30 June 1992 Provided by IHSNot f
3、or ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 2 FIGURE 1. Classes A, G, K, M, R, T, W and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 3 NOTES: 1. Dimensions are in
4、 inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indicator line shall be color coded red. 5. Rear accessory interchangeabilit
5、y dimensions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 will not mate with MIL-DTL-26500 connectors. 7. See table I for contact cavities requiring this dimension. 8. Phantomed configuration optional. 9. The centerline of indicated projection must be located on vertical centerline 2.
6、Inches mm Inches mm Inches mm Inches mm Inches mm .005 0.08 .154 3.91 .530 13.46 .881 22.37 1.235 31.37 .010 0.25 .160 4.06 .535 13.59 .896 22.76 1.237 31.42 .015 0.38 .195 4.95 .558 14.17 .901 22.89 1.240 31.50 .025 0.64 .206 5.22 .562 14.27 .906 23.01 1.250 31.75 .035 0.89 .209 5.31 .580 14.70 .93
7、6 23.77 1.252 31.80 .061 1.55 .210 5.33 .594 15.09 .937 23.80 1.257 31.93 .063 1.60 .263 6.68 .627 15.93 .969 24.61 1.312 33.32 .071 1.80 .265 6.73 .685 17.40 .985 25.02 1.320 33.53 .072 1.83 .281 7.14 .696 17.68 .987 25.07 1.340 34.04 .076 1.93 .290 7.37 .700 17.78 1.002 25.45 1.343 34.11 .078 1.98
8、 .340 8.64 .705 17.19 1.007 25.58 1.358 34.49 .084 2.13 .388 9.86 .708 17.98 1.031 26.19 1.362 34.59 .089 2.26 .394 10.01 .719 18.26 1.062 26.97 1.375 34.92 .092 2.34 .413 10.49 .728 18.49 1.108 28.14 1.377 34.98 .096 2.44 .418 10.62 .754 19.15 1.110 28.19 1.382 35.10 .100 2.54 .424 10.77 .769 19.53
9、 1.112 28.24 1.437 36.50 .107 2.72 .433 11.00 .772 19.61 1.125 28.58 1.483 37.67 .114 2.90 .480 12.19 .774 19.66 1.127 28.63 1.562 39.67 .125 3.18 .490 12.45 .806 20.47 1.132 28.75 1.703 43.26 .145 3.68 .515 13.08 .812 20.62 1.156 29.63 .146 3.71 .518 13.16 .860 21.84 1.187 30.15 .150 3.81 .519 13.1
10、8 .875 22.22 1.233 31.32 FIGURE 1. Classes A, G, K, M, R, T, W and Z - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 4 FIGURE 2. Classes N and S. Provided by IHSNot for ResaleNo reproduction or networking permitted with
11、out license from IHS-,-,-MIL-DTL-83723/82E 5 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indi
12、cator line shall be color coded red. 5. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 will not mate with MIL-DTL-26500 connectors. 7. See table I for contact cavities requiring this dimension. 8. Phantomed configuration optional. 9. The cente
13、rline of indicated projection must be located on vertical centerline 2. Inches mm Inches mm Inches mm Inches mm Inches mm .005 0.08 .154 3.91 .530 13.46 .881 22.37 1.235 31.37 .010 0.25 .160 4.06 .535 13.59 .896 22.76 1.237 31.42 .015 0.38 .195 4.95 .558 14.17 .901 22.89 1.240 31.50 .025 0.64 .206 5
14、22 .562 14.27 .906 23.01 1.250 31.75 .035 0.89 .209 5.31 .580 14.70 .936 23.77 1.252 31.80 .061 1.55 .210 5.33 .594 15.09 .937 23.80 1.257 31.93 .063 1.60 .263 6.68 .627 15.93 .969 24.61 1.312 33.32 .071 1.80 .265 6.73 .685 17.40 .985 25.02 1.320 33.53 .072 1.83 .281 7.14 .696 17.68 .987 25.07 1.34
15、0 34.04 .076 1.93 .290 7.37 .700 17.78 1.002 25.45 1.343 34.11 .078 1.98 .340 8.64 .705 17.19 1.007 25.58 1.358 34.49 .084 2.13 .388 9.86 .708 17.98 1.031 26.19 1.362 34.59 .089 2.26 .394 10.01 .719 18.26 1.062 26.97 1.375 34.92 .092 2.34 .413 10.49 .728 18.49 1.108 28.14 1.377 34.98 .096 2.44 .418
16、10.62 .754 19.15 1.110 28.19 1.382 35.10 .100 2.54 .424 10.77 .769 19.53 1.112 28.24 1.437 36.50 .107 2.72 .433 11.00 .772 19.61 1.125 28.58 1.483 37.67 .114 2.90 .480 12.19 .774 19.66 1.127 28.63 1.562 39.67 .125 3.18 .490 12.45 .806 20.47 1.132 28.75 1.703 43.26 .145 3.68 .515 13.08 .812 20.62 1.1
17、56 29.63 .146 3.71 .518 13.16 .860 21.84 1.187 30.15 .150 3.81 .519 13.18 .875 22.22 1.233 31.32 FIGURE 2. Classes N and S -Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 6 Inches mm .116 2.95 .125 3.18 Shell size A thre
18、ad B C D F 8 .562-24 UNEF-2A .394 (10.01) .418 (10.62) .413 (10.49) .290 (7.37) .562 (14.27) 10 .688-24 UNEF-2A .515 (13.08) .535 (13.59) .530 (13.46) .388 (9.86) .696 (17.68) 12 .875-20 UNEF-2A .685 (17.40) .705 (17.91) .700 (17.78) .558 (14.17) .875 (22.23) 14 .938-20 UNEF-2A .754 (19.15) .774 (19
19、66) .769 (19.53) .627 (15.93) .936 (23.77) 16 1.062-18 UNEF-2A .881 (22.38) .901 (22.89) .896 (22.76) .772 (19.61) 1.062 (26.97) 18 1.188-18 UNEF-2A .987 (25.07) 1.007 (25.58) 1.002 (25.45) .860 (21.84) 1.187 (30.15) 20 1.312-18 UNEF-2A 1.112 (28.24) 1.132 (28.75) 1.127 (28.63) .985 (25.02) 1.312 (
20、33.32) 22 1.438-18 UNEF-2A 1.237 (31.42) 1.257 (31.93) 1.252 (31.80) 1.110 (28.19) 1.437 (36.50) 24 1.562-18 UNEF-2A 1.362 (34.59) 1.382 (35.10) 1.377 (34.98) 1.235 (31.37) 1.562 (39.67) FIGURE 3. Dimensions and configurations. Provided by IHSNot for ResaleNo reproduction or networking permitted wit
21、hout license from IHS-,-,-MIL-DTL-83723/82E 7 Shell size G H R number of teeth S +.005 / -.000 T 8 .594 (15.09) .812 (20.62) 12 .490 (12.45) .076 (1.93) .071 (1.80) 10 .719 (18.26) .937 (23.80) 15 .636 (16.15) .089 (2.26) .084 (2.13) 12 .812 (20.62) 1.031 (26.19) 21 .806 (20.47) 14 .906 (23.01) 1.12
22、5 (28.58) 24 .875 (22.23) 16 .969 (24.61) 1.250 (31.75) 30 1.002 (25.45) 18 1.062 (26.97) 1.343 (34.11) 33 1.108 (28.14) 20 1.156 (29.36) 1.437 (36.50) 36 1.233 (31.32) 22 1.250 (31.75) 1.562 (39.67) 39 1.358 (34.49) 24 1.375 (34.93) 1.703 (43.26) 42 1.483 (37.67) NOTES: 1. Dimensions are in inches.
23、 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Coupling indicator line shall be color coded red. 5. Rear accessory interchangeability dimens
24、ions shall be in accordance with MIL-DTL-83723. 6. Shell size 8 will not mate with MIL-DTL-26500 connectors. 7. See table I for contact cavities requiring this dimension. 8. Phantomed configuration optional. 9. The centerline of indicated projection must be located on vertical centerline 2. FIGURE 3
25、 Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 8 REQUIREMENTS: Dimensions and configurations: See figures 1 and 3 for classes A, G, K, M, R, T, W and Z. See figures 2 and 3 for classes N
26、 and S. This connector mates with MIL-DTL-83723/87, MIL-DTL-83723/92, MIL-DTL-83723/96 and MIL-C-83723/98. Insert arrangements and polarizing positions: See MIL-STD-1554 and table I. TABLE I. Insert arrangements requiring reduced diameter for lead-in chamfers on outer row of contact cavities as indi
27、cated. Shell size Insert arrangements Contact cavities 8 10 03, 98 06 1, 2, 3 1, 2, 3, 4, 5, 6 O-ring: See MIL-DTL-83723. Part or Identifying Number (PIN) example: M83723/ 82 W 22 55 N Military designation Specification sheet number Class Shell size Insert arrangement Polarizing position Changes fro
28、m previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-C-83723/98 MIL-DTL-26500 MIL-DTL-83723/87 MIL-DT
29、L-83723/92 MIL-DTL-83723/96 MIL-STD-1554 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/82E 9 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2008-163) DLA - CC Review activ
30、ities: Army - AR, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
