1、IS9560 REV G = 9999932 0086349 T90 PREPARING ACm DU-IS MILITARY SPECIFICATION SHEET CUSTOOWS: ARMY-AV WW- AS rnE BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND AR FORCE-99 OU- RNIW. 82 HEAT RESISTANT STEEL .4375-24 UNJF-3A Farm Approved OMB NO. 0704-0ia8 SPECIflcAnoN 2 SEP 93 MS95
2、60 RN G Ms9s60 2o 93 WRENCHING CONFIGURATION IN ACCORDANCE WITH AS 870 FOR THIS OISTANCR MSTRBUTION STATEUENT A. Appmued for public rdbQae; distribution i8 unlimited. - DASH UMBE -04 -05 -06 -0: -08 -09 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 - - Page 1 of 2 - L ,688 ,750 ,812 375 .938 1 .WO
3、 1.062 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 I .750 - - APPRON .105-,125 5.05 ,105-,125 5.28 .105-,125 5.51 .105-,125 5.74 .105-,125 5.97 .105-,125 6.20 .105-.125 6.43 .105-,125 6.67 .105-,125 6.90 .105-,125 7.13 .190-,250 7.59 .128-.ma 7.36 252-,312 7.82 ,315-,375 8.05 ,378- ,
4、438 8.27 .440-SOO 8.50 S02-.562 8.73 ,565-.625 8.96 TABLE I. DASH NUMBERS AND DIMENSIONS DASH IUMBER L -22 1.875 -23 2.000 -24 2.125 -25 2.250 -26 2.375 -27 2.500 -28 2.625 -29 2.750 -30 2.875 -31 3.000 -32 3.125 -33 3.250 -34 3.375 -35 3.500 -36 3.625 -37 3.750 -39 4.000 -38 3.875 K ,690- ,750 B15-
5、 ,875 ,940 - 1 .o00 1 .O65 - 1.125 1 .i90 - 1.250 1.315 - 1.375 1.44 - 1.5W 1 .565 - 1.625 1.690 - 1,750 1.815 - 1.875 1.940 - 2.000 2.065- 2.125 2.190- 2.250 2.315- 2.375 2.440 - 2.5M) 2.565 - 2.625 2.690- 2.750 2.81 5 - 2.875 - PPROX IEIGHT 8/100 9.43 9.90 10.38 10.85 11.32 11.79 12.26 12.72 13.19
6、 13.66 14.12 14.59 15.06 15.52 15.99 16.45 16.92 17.39 - DENOTES CHANGE(S) DASH UMBER L U -40 4.1 25 2.940 - 3.000 -41 4.250 3.065-3.125 -42 4.375 3.190-3.250 -43 4.500 3.315- 3.375 -44 4.625 3.440 - 3.500 -45 4.750 3.565 - 3.625 -46 4.875 3.690 - 3.750 -47 5.000 3.815- 3.875 -48 5.125 3.940-4.000 -
7、49 5.250 4.065-4.125 -50 5.375 4.190-4.250 -51 5.500 4.31 5 - 4.375 -52 5.625 4.440 - 4.500 -53 5.750 4.565 - 4.625 -54 5.875 4.690 - 4.750 -55 6.000 4.815- 4.875 -56 1.812 ,628- ,688 -57 1.938 ,752- ,812 APPRO WEIGKI LB/IoL! 17.85 18.3 1 18.75 19.31 19.66 20.12 20.59 21.05 21.51 21 97 22.33 22.80 2
8、3.27 23.74 24.21 24.67 9.20 9.67 INCH - POUNDI DD Form 672, MAY 88 -=- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9560 REV G 7799912 0086350 702 = PEPARING ACTMlY DU-IS JSTOMANS: ARMY-AV “f- AS UR FORCE-99 DIA- MEW: 82 Form Approved OMB No. 07
9、04-0188 MILITARY SPECIFICATION SHEET NUMBER 7. SEP 93 rmE MS9560 REV G BOLT, MACHINE-DOUBLE HEXACON. SUPERSEDING EXTENDED WASHER HEAD. CORROSION AND 9560 F 20 APR 9s HEAT RESISTANT STEEL. ,4575-24 UNJF-U REOUIREMENTS: 1. YATFRIN: CORROSION AND HEAT RESISTANT STEEL IN ACCORDANCE WITH AMS 5731-85. 2.
10、THREADS: THREADS IN ACCORDANCE WITH MIL-S-8879. INCOMPLETE THREADS NOT TO ENTER FILLET 3. DIMENCIONING ND Tm : DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ANSI Y14.5M. STRIEUTION STATEMPIT A. distribution is unlimited. 4. HFAD TO SHANK Film: HEAD TO SHANK FILLfT SWLL BE COLO ROLLED AFTE
11、R HEAT TREATMENT TO REMOVE ALL VISWL EVIDENCE OF GRINDING OR TOOL MARKS EXCEPT DASH NUMBER SIZES -15 AND SWER. Poge 2 of 1 5. =ENT P- : FLUORESCENT PENETRANT INSPECTION SHAiL BE IN ACCORDANCE WITH AMS 2645-83. 6. WRFACE TWRE: SURFACE TEXTURE. UNLESS OTHERWISE SPECIFIED, SHALL BE 125 MICROINCHES 7. I
12、fURWCE: UNLESS OTHERWISE SPECIFIED. TOLERANCES SHALL BE FOR LINEAR DIMENSIONS .010, EXCEPT UPSET HEAD IN ACCORDANCE WITH ANSI/ASME 846.1. ANGULAR DIMENSIONS *!Y. 8. EebLc: BREAK SHARP EDGES ,003-.O15 UNLESS OTHERWISE SPECIFIED. 9. PARTNUMBER: THE PART NUMBER SHALL CONSIST OF THE EASIC MS NUMBER FOUO
13、WED BY A DASH NUMBER FROM TABLE. EXAMPLE: MS9560-04 DASH NUMBER E BASIC MS NUMBER MS956D-04 INDICATES: BOLT. MACHINE-DOUBLE HEXAGON. EXTENDED WASHER HW, .4375-20 UNJF-3A. LENCTH ,688 NOTES: 1. ALL DIMENSIONS IN INCHES. 2. DO NOT USE UNASSIGNED PART NUMBERS. 3. IN THE MNT OF A CONFLICT BETwEfN THE Tf
14、xI OF THIS 5TANDARD AND THE REFERENCES CITED HEREIN. THE TM OF THIS STANDARD SHALL TAKE PRECEDENCE. REFERENCOD GOMRNMENT (OR NON-COVERNMENl) DOCUMENTS OF THE ISSUE LISTED IN THAT ISSUE OF THE DEPARTMENT OF DEFENSE INDEX OF THE SPECIFICATIONS AND STANDARDS (DODISS) SPECIFIED IN THE SOLICITATION FORM A PART OF THIS STANDARD TO THE MENT SPECIFIED HEREIN. 4. 5. MIS STANDARD WA DEMLOPED COWERATMLY WITH SAE AEROSPACE PROPULSION DMSION. 6. AS AND AMs ARE UE PUBLICATIONS. ID Form 672, MAY 88 -mnwuEoacrm Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
