1、AMSC N/A FSC 5985 INCH-POUND MS25057D 21 June 2013 SUPERSEDING MS25057C 9 November 2007 DETAIL SPECIFICATION SHEET TAKEUP, ANTENNA This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein sh
2、all consist of this specification sheet and MIL-DTL-7965. MS PIN MS25057-1 FIGURE 1. Dimensions and configuration. INACTIVE FOR NEW DESIGN AFTER 4 JUNE 1999. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25057D 2 NOTES: 1. Unless otherwise specif
3、ied, dimensions are in inches: One place decimal .1, two place decimals .02. 2. Millimeters are for information only. 3. Remove burrs and sharp edges. FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
4、-MS25057D 3 REQUIREMENTS: Material: Swivel: .06 inch thick corrosion-resistant steel, in accordance with SAE-AMS documents 5902, 5517, 5518, 5519 and ASTM-A666. Material for socket and tension takeup body shall be corrosion resistant steel in accordance with ASTM-A276. The ball is to be coated with
5、appropriate surface lubricant. Threads: Shall conform to MIL-S-7742. Maximum weight: 0.11 pound. Acquisition document: MIL-DTL-7965. This specification sheet takes precedence over documents referenced herein. Referenced documents. In addition to MIL-DTL-7965, this document references the following:
6、ASTM-A276 SAE-AMS5517 ASTM-A666 SAE-AMS-5518 MIL-S-7742 SAE-AMS-5519 MS25061 SAE-AMS-5902 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Navy - AS DLA - CC Air Force - 85 DLA -
7、CC (Project 5985-2013-027) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
