1、AMSC N/A FSC 5355 MS25166F 15 December 2010 SUPERSEDING MS25166E 24 November 1964 DETAIL SPECIFICATION SHEET KNOB, POINTER, ILLUMINATED This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described here
2、in shall consist of this specification sheet and procurement specification NASM25049. .223 .0011.500.875.50055.500R .0625.250A ABB.031WHITE ARROW4522 30.062.188.938.844.750SECTION A - A.062 X 45METALINSERTSECTION B - B.594.375.223 .001PERMANTENTLY MARK MS PART NUMBER ANDMANUFACTURERS NAME OR TRADE-M
3、ARK.SET SCREWNASM565 P/N AN565DC8-7DRILL .136, AND10387THREAD NO. 8-32 NC-2BSPECIFICATION MIL-S-7742COUNTERDRILL .173DEPTH .250.250.719.253 .001.087 MAX 45 CHAMFER OR .078 MAXRADIUS FILLET RADIIFIGURE I. Knob. INCH-POUNDInactive for new design after 23 July 1997.Provided by IHSNot for ResaleNo repro
4、duction or networking permitted without license from IHS-,-,-MS25166F 2Notes: 1. Part number MS25166-1 2. Material: Knob, transparent thermoplastic. Insert, brass per ASTM B16/B16M, H02 half-hard. Setscrew, CRES per ASTM A582/582M, Type 303 or 303Se. 3. Finish: The entire outer surface of knob, exce
5、pt for the white arrow, shall be coated with gray mat material having a dark dull gray color conforming to color number 36231 per FED-STD-595. Insert, none. Setscrew, passivate. 4. Contrast of the white arrow and gray coating shall be not less than 2.5 when specified in MIL-DTL-7788. 5. Break all sh
6、arp edges and corners. 6. Dimensions are in inches. Unless otherwise specified, tolerance is .016, angle 2 0. 7. For design feature purposes, this standard takes precedence over procurement documents referenced herein. 8. Referenced documents shall be of the issue in effect on the date of invitation
7、 for bid. 9. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army -CR DLA -IS Navy - AS Air Force 11 (Project 5355-2010-002) NOTE: The activities lis
8、ted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
