DLA MS27226 REV B-2007 SWIVEL NUT ASSEMBLY 45 DEGREE ADAPTER HOSE TO TUBE REUSABLE HYDRAULIC FUEL AND OIL LINES《可重复使用的45度旋转螺母法兰软管组件适配器》.pdf

上传人:rimleave225 文档编号:696672 上传时间:2019-01-02 格式:PDF 页数:3 大小:43.88KB
下载 相关 举报
DLA MS27226 REV B-2007 SWIVEL NUT ASSEMBLY 45 DEGREE ADAPTER HOSE TO TUBE REUSABLE HYDRAULIC FUEL AND OIL LINES《可重复使用的45度旋转螺母法兰软管组件适配器》.pdf_第1页
第1页 / 共3页
DLA MS27226 REV B-2007 SWIVEL NUT ASSEMBLY 45 DEGREE ADAPTER HOSE TO TUBE REUSABLE HYDRAULIC FUEL AND OIL LINES《可重复使用的45度旋转螺母法兰软管组件适配器》.pdf_第2页
第2页 / 共3页
DLA MS27226 REV B-2007 SWIVEL NUT ASSEMBLY 45 DEGREE ADAPTER HOSE TO TUBE REUSABLE HYDRAULIC FUEL AND OIL LINES《可重复使用的45度旋转螺母法兰软管组件适配器》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 MS27226B INCH-POUND14 May 2007 SUPERSEDING MS27226A 22 September 2000 DETAIL SPECIFICATION SHEET SWIVEL NUT ASSEMBLY 45, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES This specification is approved for use by all Departments and Agencies of the Department of Defense. The requiremen

2、ts for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5070. FIGURE 1. 45 Swivel nut assembly dimensions and configuration. AMSC N/A FSC 4730Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27226B 2 Nippl

3、e assembly PIN (see note 3) Socket PIN Dash numberMS27225 MS24590 -4 -4 -4-5 -5 -5 -6 -6 -6-8 -8 -8 -10 -10 -10-12 -12 -12 MS24591-16 -16 -16 -20 -20 -20-24 -24 -24 -32 -32 -32NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Part or Identifying Number (PIN

4、). FIGURE 1. 45 Swivel nut assembly dimensions and configuration - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and MIL-DTL-5070, this drawing s

5、hall govern. Intended use. This assembly is designed for use only with hose conforming to MIL-DTL-8794. PIN example: MS 27226 -4 CZ Material/finish designator see table I Dash number on figure 1 Specification number MS prefix Identification of product. The PIN and the manufacturers Commercial and Go

6、vernment Entity (CAGE) Code or trademark shall be marked on a removable tag securely attached to the assembly. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27226B 3 TABLE I. Code for material and finish. Code Dash size Material/finish CC -4 thro

7、ugh -6 Carbon Steel - cadmium plating CZ -4 through -6 Carbon steel - zinc plating SS -4 through -6 Corrosion resistant steel - N/A AA -8 through -32 Aluminum - anodic coating TA -4 through -32 Titanium - anodized or fluoride phosphated. To the users of this document, it is recommended that the use

8、of carbon steel material with cadmium plating be used only when the other materials and finishes specified in this document cannot meet performance requirements. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due

9、to the extent of the changes. Referenced documents. In addition to MIL-DTL-5070, this document references the following: MIL-DTL-8794 MS27225 MS24590 MS24591 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - AS Air Force - 99 (Project 4730-2005-045) DLA - CC Review activi

10、ties: Army - AV Navy - MC, SA Air Force - 11, 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASTM D3913-2003(2015) Standard Test Method for Acidity in Basic Chromium Tanning Liquors《鞣皮液体碱性铬中酸度的标准试验方法》.pdf ASTM D3913-2003(2015) Standard Test Method for Acidity in Basic Chromium Tanning Liquors《鞣皮液体碱性铬中酸度的标准试验方法》.pdf
  • ASTM D3914-2002 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒平面剪切强度的标准测试方法》.pdf ASTM D3914-2002 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒平面剪切强度的标准测试方法》.pdf
  • ASTM D3914-2002(2008) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒平面剪切强度的标准试验方法》.pdf ASTM D3914-2002(2008) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒平面剪切强度的标准试验方法》.pdf
  • ASTM D3914-2002(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《拉挤玻璃纤维增强型塑料杆材的平面内剪切强度的标准试验方法》.pdf ASTM D3914-2002(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod《拉挤玻璃纤维增强型塑料杆材的平面内剪切强度的标准试验方法》.pdf
  • ASTM D3916-2002 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒抗拉特性的标准试验方法》.pdf ASTM D3916-2002 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《挤拉制玻璃纤维增强塑料棒抗拉特性的标准试验方法》.pdf
  • ASTM D3916-2008 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《挤拔玻璃纤维增强塑料棒张力特性的试验方法》.pdf ASTM D3916-2008 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《挤拔玻璃纤维增强塑料棒张力特性的试验方法》.pdf
  • ASTM D3916-2008(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《拉挤玻璃纤维增强塑料杆拉伸性能的标准试验方法》.pdf ASTM D3916-2008(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod《拉挤玻璃纤维增强塑料杆拉伸性能的标准试验方法》.pdf
  • ASTM D3917-1996(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes《热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范》.pdf ASTM D3917-1996(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes《热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范》.pdf
  • ASTM D3917-2008 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes《热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范》.pdf ASTM D3917-2008 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes《热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1