1、 MS33678A 9 July 2004 SUPERSEDING MS33678 17 December 1958 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, INTEGRAL MOUNTING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein
2、shall consist of this specification sheet. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND This is a design standard not to be used as an MS part number. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33678A 2Inches mm .010 .25
3、4 .016 .406 .031 .787 .062 1.575 .065 1.651 .188 4.775 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33678A 3Shell size A Coupling thread B Min usable thread D + .015 (.381) - .000 ID I Max inser
4、t dia J + .031 (.787) - .000 J + .031 (.787) - .000 Mounting flange location 8S 1/228 .370 (9.398) .250 (6.350) 10S 5/824 .448 (11.379) .320 (8.128) 10SL 5/824 .448 (11.379) .448 (11.379) 12S 3/420 .557 (14.148) .448 (11.379) 14S 7/820 .682 (17.323) .525 (13.335) 16S 1.0020 .375 (9.534) .807 (20.498
5、) .650 16.510) .562 (14.275) .562 (14.275) 12 3/420 .557 (14.148) .448 (11.379) 14 7/820 .682 (17.323) .525 (13.335) 16 1.0020 .807 (20.498) .650 16.510) 18 11/818 .932 23.673 .770 (19.558) 20 11/418 1.058 (26.873) .925 (23.495) 22 13/818 1.182 (30.023) 1.020 (25.908) 24 13/418 1.307 (33.198) 1.145
6、29.083) 28 11/818 1.526 (38.760) 1.365 (34.671) 32 2.0018 1.776 (45.110) 1.615 (41.021) 36 21/416 .625 (15.875) 1.995 (50.673) 1.830 (46.482) .750 (19.05) .750 (19.05) FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without l
7、icense from IHS-,-MS33678A 4Shell size M +.031 (.787) -.000 Mounting flange location N Max outer dia P +.015 (.381) -.000 Key height 8S .532 (13.513) .130 (3.302) 10S .656 (16.662) .165 (4.191) 10SL .656 (16.662) .165 (4.191) 12S .782 (19.863) .224 (5.689) 14S .906 (23.012) .263 (6.680) 16S .562 (14
8、275) 1.032 (26.213) .325 (8.255) 12 .782 (19.863) .224 (5.689) 14 .906 (23.012) .263 (6.680) 16 1.032 (26.213) .325 (8.255) 18 1.156 (29.352) .385 (9.779) 20 1.282 (32.563) .463 (11.760) 22 .750 (19.050) 1.406 (35.712) .510 (12.954) 24 1.532 (38.913) .573 (14.554) 28 .812 (20.625) 1.782 (45.263) .6
9、83 (17.348) 32 2.032 (51.613) .808 (20.523) 36 .875 (22.225) 2.282 (57.963) .915 (23.241) FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33678A 5Requirements: Design and construction: See figure 1
10、 Where resilient inserts are used, J may be .109 (2.768 mm) less than indicated. Example of design designation: MS33678R18-5S = Environment resisting, receptacle size 18, insert arrangement -5 (see MIL-STD-1651), style S (socket contacts, see MIL-DTL-5015). MS3102R or modification thereof, may be u
11、sed in lieu of this design. For design details, see MIL-DTL-5015. Dimensions are in inches. Unless otherwise specified, tolerances are .016 (.406 mm). Insert arrangement shall be in accordance with MIL-STD-1651. Changes from previous issue. Marginal notations are not used in this revision to identif
12、y changes with respect to the previous issue due to the extent of the changes. Reference documents. This document references the following: MIL-DTL-5015 MS3102 MIL-STD-1651 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 11 (Project 5935-4419-030) DLA - C
13、C Review activities: Army - MI Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/www.dodssp.daps.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
