1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update boilerplate to MIL-PRF-38535 requirements. - jak 01-03-21 Thomas M. Hess B Change ground bounce immunity limits in table I. Editorial changes throughout. - jak 03-07-28 Thanh V. Nguyen C Update the boilerplate paragraphs to the current req
2、uirements of MIL-PRF-38535. - jak 10-04-01 Thomas M. Hess REV SHEET REV C C C C SHEET 15 16 17 18 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Joseph A. Kerby DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.d
3、la.mil STANDARD MICROCIRCUIT DRAWING CHECKED BY Thanh V. Nguyen THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL 16-BIT D-TYPE FLIP-FLOP WITH THREE-STATE OUTPUTS, TTL COMPATIBLE I
4、NPUTS, MONOLITHIC SILICON DRAWING APPROVAL DATE 94-12-09 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-94528 SHEET 1 OF 18 DSCC FORM 2233 APR 97 5962-E234-10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A
5、 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2233 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice o
6、f case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94528 01 Q X A Federal RHA Device De
7、vice Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the app
8、ropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type
9、 Generic number Circuit function 01 54ACTQ16374 16-bit D-type flip-flop with three-state outputs, TTL compatible inputs 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M V
10、endor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows
11、: Outline letter Descriptive designator Terminals Package style X GDFP1-F48 48 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitte
12、d without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2233 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VCC) -0.5 V dc to +7.0 V dc DC input voltage range (VIN)
13、 -0.5 V dc to VCC + 0.5 V dc DC output voltage range (VOUT) . -0.5 V dc to VCC+ 0.5 V dc DC input clamp current (IIK): VIN= -0.5 V -20 mA VIN= VCC+ 0.5 V . +20 mA DC output clamp current (IOK): VIN= -0.5 V -20 mA VIN= VCC+ 0.5 V . +20 mA DC output current (IOUT) per output pin 50 mA DC VCCor GND cur
14、rent (ICC, IGND) per pin . 400 mA Maximum power dissipation (PD) 750 mW Storage temperature range (TSTG) . -65C to +150C Lead temperature (soldering, 10 seconds) +300C Thermal resistance, junction-to-case (JC) See MIL-STD-1835 Junction temperature (TJ) +175C 1.4 Recommended operating conditions. 2/
15、3/ Supply voltage range (VCC) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VCCOutput voltage range (VOUT) +0.0 V dc to VCCMaximum low level input voltage (VIL) . 0.8 V dc Minimum high level input voltage (VIH) . 2.0 V dc Case operating temperature range (TC) . -55C to +125C Minimum
16、input edge rate (V/t) . 125 mV/ns (VINfrom 0.8 V to 2.0 V or from 2.0 V to 0.8 V) Maximum high level output current (IOH) . -24 mA Maximum low level output current (IOL) . +24 mA 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum
17、 levels may degrade performance and affect reliability. 2/ Unless otherwise noted, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange and case temperature range of -55C to +125C. Provided by IHSNot for ResaleNo reproduct
18、ion or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2233 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The followi
19、ng specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, Ge
20、neral Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit
21、 Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications. The following document(s) form a part of this documen
22、t to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in
23、 the solicitation. (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents may also be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a confl
24、ict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item req
25、uirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item require
26、ments for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device
27、classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified
28、on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Ground bounce load circuit and waveforms. The ground bounce load circuit and waveforms shall be as specified on figure 4. 3.2.6 Switching waveforms and test circuit. The switching waveforms and test circuit
29、shall be as specified on figure 5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2233 APR 97 3.3 Electrical
30、performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test require
31、ments. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where mark
32、ing of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-385
33、35. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-
34、PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be req
35、uired from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device class
36、es Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appen
37、dix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this d
38、rawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer
39、. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 38 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DR
40、AWING SIZE A 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2233 APR 97 TABLE I. Electrical performance characteristics. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V VCCGroup A subgroups Limits 3
41、/ Unit unless otherwise specified Min Max High level output voltage 3006 VOH For all inputs affecting output under test, VIH= 2.0 V min or VIL= 0.8 V max For all other inputs, VIN= VCCor GND IOH= -50 A 4.5 V 1, 2, 3 4.40 V 5.5 V 1, 2, 3 5.40 IOH= -24 mA 4.5 V 1 3.86 2, 3 3.70 5.5 V 1 4.86 2, 3 4.70
42、IOH= -50 mA 4/ 5.5 V 1, 2, 3 3.85 Low level output voltage 3007 VOL For all inputs affecting output under test, VIH= 2.0 V min or VIL= 0.8 V max For all other inputs, VIN= VCCor GND IOL= 50 A 4.5 V 1, 2, 3 0.10 V 5.5 V 1, 2, 3 0.10 IOL= 24 mA 4.5 V 1 0.36 2, 3 0.50 5.5 V 1 0.36 2, 3 0.50 IOL= 50 mA
43、4/ 5.5 V 1, 2, 3 1.65 Positive input clamp voltage 3022 VIC+For input under test, IIN= 18 mA 5.5 V 1, 2, 3 5.7 V Negative input clamp voltage 3022 VIC-For input under test, IIN= -18 mA 5.5 V 1, 2, 3 -1.2 Input current high 3010 IIHFor input under test, VIN= 5.5 V For all other inputs, VIN= VCCor GND
44、 5.5 V 1 0.1 A 2, 3 1.0 Input current low 3009 IILFor input under test, VIN= 0.0 V For all other inputs, VIN= VCCor GND 5.5 V 1 -0.1 A 2, 3 -1.0 Three-state output leakage current high 3021 IOZH5/ OEm = 2.0 V For all other inputs, VIN= VCCor GND VOUT= 5.5 V 5.5 V 1 0.5 A 2, 3 10.0 Three-state output
45、 leakage current low 3020 IOZL5/ OEm = 2.0 V For all other inputs, VIN= VCCor GND VOUT= 0.0 V 5.5 V 1 -0.5 A 2, 3 -10.0 Quiescent supply current, output high 3005 ICCHOEm = GND For all other inputs, VIN= VCCor GND 5.5 V 1 8.0 A 2, 3 160.0 Quiescent supply current, output low 3005 ICCLOEm = GND For a
46、ll other inputs, VIN= VCCor GND 5.5 V 1 8.0 A 2, 3 160.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94528 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION
47、LEVEL C SHEET 7 DSCC FORM 2233 APR 97 TABLE I. Electrical performance characteristics - Continued. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V VCCGroup A subgroups Limits 3/ Unit unless otherwise specified Min Max Quiescent supply current, output thr
48、ee-state 3005 ICCZ5/ OEm = VCCFor all other inputs, VIN= VCCor GND 5.5 V 1 8.0 A 2, 3 160.0 Quiescent supply current delta, TTL input level 3005 ICC6/ For input under test, VIN= VCC- 2.1 V For all other inputs, VIN= VCCor GND 5.5 V 1 1.0 mA 2, 3 1.6 Input capacitance 3012 CINTC= +25C See 4.4.1c GND 4 10 pF Output capacitance 3012 COUT5/ 5.5 V 4 15 pF Power dissipation capacitance CPD7/ 5.0 V 4 100 pF Low level ground bounce noise VOLP8/ VIH= 3.0 V, VIL= 0.0 V TA= +25C See 4.4.1d See figure 4 5.0 V 4 1100 mV VOLV8/ 5.0 V 4 -1300 High level VCCbounce noi
