1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R089-97. - JB 96-11-20 Monica L. Poelking B Add limit for linear energy threshold (LET) with no latch-up in section 1.5. Update the boilerplate to the requirements of MIL-PRF-38535. Editorial changes throughout
2、. - TVN 07-01-19 Thomas M. Hess C To correct switching waveforms input/output test limits to figure 4. Add test equivalent circuits and footnote 5 to figure 4. Add paragraph 2.2 for ASTM F1192 document. Delete class M requirements throughout.MAA 13-02-19 Thomas M. Hess REV SHEET REV C SHEET 15 REV S
3、TATUS OF SHEETS REV C C C C C C C C C C C C C C SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Thanh V. Nguyen DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIE
4、S OF THE DEPARTMENT OF DEFENSE AMSC N/A CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON DRAWING APPROVAL DATE 96-05-13 REVISION L
5、EVEL C SIZE A CAGE CODE 67268 5962-96593 SHEET 1 OF 15 DSCC FORM 2233 APR 97 5962-E195-13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISION LEVEL C
6、 SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device class Q) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying
7、Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 H 96593 01 V X A Federal RHA Device Device Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1
8、.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The dev
9、ice type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54ACTS540 Radiation hardened, inverting octal buffer/line driver with three-state outputs, TTL compatible inputs 1.2.3 Device class designator. The device class designator is a single letter identify
10、ing the product assurance level as follows: Device class Device requirements documentation Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package styl
11、e R GDIP1-T20 or CDIP2-T20 20 Dual-in-line X CDFP4-F20 20 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND
12、 AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VDD) -0.3 V dc to +7.0 V dc DC input voltage range (VIN) -0.3 V dc to VDD + 0.3 V dc DC output voltage range (VOUT) . -0.3 V dc to VDD
13、+ 0.3 V dc DC input current, any one input (IIN). 10 mA Latch-up immunity current (ILU) 150 mA Storage temperature range (TSTG) . -65C to +150C Lead temperature (soldering, 5 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +175C Maximum power dis
14、sipation (PD) . 1.0 W 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VDD) +4.5 V dc to +5.5 V dc Input voltage range (VIN) 0.0 V dc to VDDOutput voltage range (VOUT). 0.0 V dc to VDDMaximum input rise or fall time at VDD= 4.5 V (tr, tf) 1 ns/V 4/ Case operating temperature range (
15、TC) . -55C to +125C 1.5 Radiation features. 5/ Maximum total dose available (dose rate = 50 300 rads (Si)/s) . 1 x 106Rads (Si) Single event phenomenon (SEP): No SEU occurs at effective LET (see 4.4.4.4) . 80 MeV-cm2/mg 6/ No SEL occurs at effective LET (see 4.4.4.4) . 120 MeV-cm2/mg 6/ Dose rate up
16、set (20 ns pulse) 1 x 109Rads (Si)/s 6/ Latch-up . None 6/ Dose rate survivability 1 x 1012Rads (Si)/s 6/ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwi
17、se specified, all voltages are referenced to VSS. 3/ The limits for the parameters specified herein shall apply over the full specified VDDrange and case temperature range of -55C to +125C unless otherwise specified. 4/ Derate system propagation delays by difference in rise time to switch point for
18、tror tf 1 ns/V. 5/ Radiation testing is performed on the standard evaluation circuit (SEC). 6/ Limits are guaranteed by design or process, but not production tested unless specified by the customer through the purchase order or contract. Provided by IHSNot for ResaleNo reproduction or networking per
19、mitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, a
20、nd handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPAR
21、TMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these do
22、cuments are available online at https:/assist.dla.mil/quicksearch/or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Un
23、less otherwise specified, the issues of these documents are those cited in the solicitation or contract. ASTM INTERNATIONAL (ASTM) ASTM F1192 - Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of semiconductor Devices. (Copies of these documents are
24、 available online at http:/www.astm.org/ or from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA, 19428-2959). 2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes preceden
25、ce. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as
26、modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devi
27、ces and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case out
28、lines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Switching wave
29、forms and test circuit. The switching waveforms and test circuit shall be as specified on figure 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISI
30、ON LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.2.6 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing and acquiring activity upon request. 3.3 Electrical performance charact
31、eristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and post irradiation parameter limits are as specified in table IA and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electr
32、ical test requirements shall be the subgroups specified in table IIA. The electrical tests for each subgroup are defined in table IA. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the enti
33、re SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for
34、 device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appe
35、ndix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior t
36、o listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein . 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-3853
37、5 shall be provided with each lot of microcircuits delivered to this drawing. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISION LEVEL C SHEET 6 DSC
38、C FORM 2234 APR 97 TABLE IA. Electrical performance characteristics. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Min Max High level input voltage VIH All 4.5 V 1, 2, 3 2.25 V M, D, P, L, R, F, G, H 3/ All 1 2.25 All 5.5 V 1,
39、 2, 3 2.75 M, D, P, L, R, F, G, H 3/ All 1 2.75 Low level input voltage VIL All 4.5 V 1, 2, 3 0.8 V M, D, P, L, R, F, G, H 3/ All 1 0.8 All 5.5 V 1, 2, 3 0.8 M, D, P, L, R, F, G, H 3/ All 1 0.8 High level output voltage VOH For all inputs affecting output under test, VIN= VDDor VSSIOH= -12.0 mA All
40、4.5 V 1, 2, 3 3.15 V M, D, P, L, R, F, G, H 3/ All 1 3.15 Low level output voltage VOL For all inputs affecting output under test, VIN= VDDor VSSIOL= 12.0 mA All 4.5 V 1, 2, 3 0.4 V M, D, P, L, R, F, G, H 3/ All 1 0.4 Input current high IIH For input under test, VIN= VDDFor all other inputs, VIN= VD
41、Dor VSSAll 5.5 V 1, 2, 3 +1.0 A M, D, P, L, R, F, G, H 3/ All 1 +1.0 Input current low IIL For input under test, VIN= VSSFor all other inputs, VIN= VDDor VSSAll 5.5 V 1, 2, 3 -1.0 A M, D, P, L, R, F, G, H 3/ All 1 -1.0 Output current (source) IOH4/ For output under test, VOUT= VDD - 0.4 V VIN= VDDor
42、 VSSAll 4.5 V and 5.5 V 1, 2, 3 -12.0 mA M, D, P, L, R, F, G, H 3/ All 1 -12.0 Output current (sink) IOL4/ For output under test, VOUT= 0.4 V VIN= VDDor VSSAll 4.5 V and 5.5 V 1, 2, 3 12.0 mA M, D, P, L, R, F, G, H 3/ All 1 12.0 Quiescent supply current IDDQVIN= VDDor VSSAll 5.5 V 1, 2, 3 10.0 A M,
43、D, P, L, R, F, G, H 3/ All 1 10.0 Quiescent supply current delta, TTL input levels IDDQ5/ For input under test, VIN= VDD- 2.1 V For all other inputs, VIN= VDDor VSSAll 5.5 V 1, 2, 3 1.6 mA M, D, P, L, R, F, G, H 3/ All 1 1.6 Short circuit output current IOS6/ 7/ VOUT= VDDand VSSAll 5.5 V 1, 2, 3 300
44、 mA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96593 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE IA. Electrical per
45、formance characteristics Continued. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Min Max Three-state output leakage current, high IOZHGm = 5.5 V For all other inputs, VIN= VDDor VSSVOUT= VDD All 5.5 V 1, 2, 3 +30.0 A M, D, P,
46、 L, R, F, G, H 3/ All 1 +30.0 Three-state output leakage current, low IOZLGm = 5.5 V For all other inputs, VIN= VDDor VSSVOUT= VSS All 5.5 V 1, 2, 3 -30.0 A M, D, P, L, R, F, G, H 3/ All 1 -30.0 Input capacitance CINf = 1 MHz See 4.4.1c All 0.0 V 4 15.0 pF Output capacitance COUTf = 1 MHz See 4.4.1c
47、 All 0.0 V 4 15.0 pF Switching power dissipation PSW8/ CL= 50 pF, per switching output All 4.5 V and 5.5 V 4, 5, 6 2.1 mW/ MHz M, D, P, L, R, F, G, H 3/ All 4 2.1 Functional test 9/ VIH= 0.5 VDD, VIL= 0.8 VSee 4.4.1b All 4.5 V and 5.5 V 7, 8 L H M, D, P, L, R, F, G, H 3/ All 7 L H Propagation delay
48、time, An to Yn tPLH10/ CL= 50 pF minimum See figure 4 All 4.5 V and 5.5 V 9, 10, 11 1.0 12.0 ns M, D, P, L, R, F, G, H 3/ All 9 1.0 12.0 tPHL10/ CL= 50 pF minimum See figure 4 All 4.5 V and 5.5 V 9, 10, 11 1.0 13.0 M, D, P, L, R, F, G, H 3/ All 9 1.0 13.0 Propagation delay time, output enable, Gm to Yn tPZH10/ CL= 50 pF minimum See figure 4 All 4.5 V and 5.5 V 9, 10, 11 2.0 15.0 ns M, D, P, L, R, F, G, H 3/ All 9 2.0 15.0 tPZL10/ CL= 50 pF minimum See figure 4 All 4.5 V and 5.5 V 9, 10, 11 2.0 14.0 M, D, P, L, R, F, G, H 3/ All 9 2.0 14
