1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. - gt 02-07-12 R. MONNIN B Update drawing as part of five year review. -rrp 12-03-06 C. SAFFLE REV SHEET REV SHEET REV STATUS REV B B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12
2、 13 PMIC N/A PREPARED BY Rajesh Pithadia DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Rajesh Pithadia APPROVED BY Raymond Monnin MICROCIRC
3、UIT, LINEAR, DUAL, PULSE WIDTH MODULATION CONTROL CIRCUIT, MONOLITHIC SILICON DRAWING APPROVAL DATE 99-11-16 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-99584 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E251-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
4、se from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and spa
5、ce application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example:
6、5962 - 99584 01 Q E A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 speci
7、fied RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify t
8、he circuit function as follows: Device type Generic number Circuit function 01 1451A Dual, pulse width modulation control circuit 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documen
9、tation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and
10、as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class
11、M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage, VCC. 51
12、 V Amplifier input voltage, VIN. 20 V Collector output voltage, VOUT. 51 V Collector output current, IOUT . 21 mA Continuous total power dissipation, PD(TA= 25C) 1375 mW 2/ Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA): Case outlines E and
13、2 . 91C/W Storage temperature range -65C to +150C Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds 260C Maximum junction temperature (TJ) . 150C 1.4 Recommended operating conditions. Supply voltage, VCC. 3.6 V min to 50 V max Amplifier input voltage, VIN. 1.05 V min to 1.45 V max Collect
14、or output voltage, VOUT. 50 V max Collector output current, IOUT. 20 mA max Current into feedback terminal . 45 A max Feedback resistor, RF100 k min Timing capacitor, CT150 pF min to 15000 pF max Timing resistor, RT. 5.1 k min to 100 k max Oscillator frequency . 1 kHz min to 500 kHz max Ambient oper
15、ating temperature range, TA. -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are t
16、hose cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case
17、 Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Ave
18、nue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a spec
19、ific exemption has been obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ For TA 25C, derate at 11.0 mW/C. Provided by IHSNot for ResaleNo reproduction or net
20、working permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in
21、 accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance
22、with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and
23、 herein for device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Block diagram. The block diagram shall be as specified on figure 2. 3.2.4 Timing waveform. The timi
24、ng waveform shall be as specified on figure 3. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full
25、 ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition,
26、the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for devi
27、ce classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance
28、mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). Fo
29、r device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this
30、drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device cla
31、sses Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 here
32、in) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers facil
33、ity and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 52 (see MIL-PRF-38535, appendix
34、 A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test
35、Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max REFERENCE SECTION Output voltage VREFIOUT= 1 mA 1 01 2.4 2.6 V 2, 3 2.35 2.65 Output voltage change with temperature VREF2/ 1, 2, 3 01 4 % Input voltage regulation VIRVCC= 3.6 V to 40 V 1
36、01 12.5 mV 2 15 3 30 Output voltage regulation VORIOUT= 0.1 mA to 1 mA 1 01 7.5 mV 2 14 3 20 Short circuit output current IOSVOUT= 0 V 1, 2, 3 01 3 30 mA UNDERVOLTAGE LOCKOUT SECTION Hysteresis VHYS1 01 80 mV 2, 3 10 Reset threshold voltage VRESET1, 3 01 1.50 V 2 0.95 SHORT CIRCUIT PROTECTION (SCP)
37、CONTROL SECTION Input threshold voltage VITHSCP1 01 650 750 mV 2 400 550 3 800 950 Standby voltage VSB1, 2, 3 01 140 230 mV Latched input voltage VILATSCP1, 2, 3 01 120 mV OSCILLATOR SECTION Frequency change with temperature fTEMP2/ 1, 2, 3 01 10 % See footnotes at end of table. Provided by IHSNot f
38、or ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Condit
39、ions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max DEAD TIME (DTC) CONTROL SECTION Input bias current (DTC) IIBDTC1 01 1 A 2, 3 3 Latch mode (source) current (DTC) ISLATDTC1, 2, 3 01 -80 A Latched input voltage (DTC) VILATDTC1 01 2.3 V 2 2.22 3 2.28 In
40、put threshold voltage at f = 10 kHz VITHDTCZero duty cycle 2/ 1, 2, 3 01 2.25 V Maximum duty cycle 2/ 1.20 ERROR AMPLIFIER SECTION Input offset voltage VIOVOUT(FEEDBACK) = 1.25 V 1 01 -6 +6 mV 2 -10 +10 3 -12 +12 Input offset current IIOVOUT(FEEDBACK) = 1.25 V 1, 2 01 -100 +100 nA 3 -200 +200 Input
41、bias current IIBVOUT(FEEDBACK) = 1.25 V 1, 2 01 500 nA 3 700 Common mode input voltage range VCMVCC= 3.6 V to 40 V 1, 2, 3 01 1.05 to 1.45 V Open loop voltage amplification AVRF= 200 k 1, 2 01 70 dB 3 64 Common mode rejection ratio CMRR 1, 2, 3 01 60 dB Positive output voltage swing VOM+1, 2, 3 01 2
42、 V Negative output voltage swing VOM-1, 2, 3 01 1 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET
43、7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max ERROR AMPLIFIER SECTION Continued Output (sink) current (FEEDBACK) IOSINKVID= -0.1 V, VOUT= 1.25 V
44、 1 01 0.5 mA 2 0.4 3 0.3 Output (source) current (FEEDBACK) IOSOURCEVID= 0.1 V, VOUT= 1.25 1 01 -45 A 2 -25 3 -15 OUTPUT SECTION Collector off state current IOFFVOUT= 50 V 1, 2, 3 01 10 A Output saturation voltage VOSAT1 01 2 V 2 2.4 3 2.2 PWM COMPARATOR SECTION Input threshold voltage at f = 10 kHz
45、 (FEEDBACK) VITHFBZero duty cycle 2/ 1, 2, 3 01 2.25 V Maximum duty cycle 2/ 1, 2, 3 1.20 TOTAL DEVICE Standby supply current ISOFFOff state 1, 2, 3 01 1.8 mA Average supply current ISRT= 10 k 1, 2, 3 01 2.4 mA 1/ Unless otherwise specified, VCC= 6 V, f = 200 kHz. 2/ Not production tested. Provided
46、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 Device type 01 Case outline E 2 Terminal number Terminal symbol 1 CT
47、 NC 2 RT CT 3 1 IN+ RT 4 1 IN- 1 IN+ 5 1FEEDBACK 1 IN- 6 1DTC NC 7 1OUT 1FEEDBACK 8 GND IDTC 9 VCC1OUT 10 2OUT GND 11 2DTC NC 12 2FEEDBACK VCC13 2IN- 2OUT 14 2IN+ 2DTC 15 SCP 2FEEDBACK 16 REF NC 17 - 2IN- 18 - 2IN+ 19 - SCP 20 - REF NC = No connection FIGURE 1. Terminal connections. Provided by IHSN
48、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-99584 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 9 DSCC FORM 2234 APR 97 FIGURE 2. Block diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A
