1、A-A-54150 b5 W 777777Li 0054775 T W A-A-54 15 O 30 April 1990 COMMERCIAL ITEM DESCRIPTION SCISSORS, IRIS, CURVED, 4-7/8 INCH The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-S-36526, which is cancelled. Thi
2、s Commercial Item Description covers surgical scissors suitable for use in the practice of eye surgery. Salient characteristics: General. The performance of the scissors shall be in accordance with ASTM F1079. Material. Material of the scissors shall be Class 4 corrosion resistant steel in accordanc
3、e with ASTM F899. Hardness. The scissors shall have a Rockwell Hardness C scale (HRC) of 50 to 55, when tested in accordance with ASTM E18 or E92 whichever is applicable. Conversion of hardness values shall be in accordance with ASTM E140. Style, desisn and dimensions. The scissors shall be in accor
4、dance with Defense Personnel Support Center (DPSC) Drawing No. 20741 for style, design and dimensions. Finish. The scissors shall have a mirror finish. The cutting edge shall be properly honed. The inside blades shall be ground to remove all surface imperfections, followed by polishing to produce a
5、non-reflective finish. Passivation. The scissors shall be properly passivated. Corrosion resistance. The scissors shall show-no evidence of corrosion or plating of copper when tested in accordance with ASTM F1089. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution
6、is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54150 b5 m 7777974 0054796 I m A-A-54 15 O Identification markins and labelins. Scissors shall be legibly marked with the contractors name or trademark and the word llstainless. Foreig
7、n manufactured scissors shall bear the name of the country of origin. Workmanship. The scissors shall be free from defects which detract from its appearance or impair its serviceability. Unit. Each (EA). One scissors, as specified, constitutes one unit. QUALITY ASSURANCE PROVISIONS. Responsibility f
8、or inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable f
9、or the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescrib
10、ed requirements. Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon request, at any time, or from time to time, during the performance of the contract and for a period of three years after deli
11、very of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory applicants or procedures) and testing (determination by technical means and chemical properties) o
12、f the item. Samplins for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, and as specified herein. scissors. Sampling shall be Inspection level II with an acceptable quality level (AQL) of 1.0. Unit of product for examination purposes shall be one Examination.
13、 Examination shall be conducted to determine compliance with specification requirements. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. product for test purposes shall be one scissors. Sampling shall be Inspection level S-2 with an AQL of 1.0. Samplins
14、for tests. Unit of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5LiL50 65 7777774 005Li777 3 E A-A-54 150 Tests. Tests shall be conducted to determine compliance 0 with specification requirements. Where feasible, the same sample shall be use
15、d for the determination of two or more test characteristics. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. T
16、he Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured
17、 using inchnpound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tol
18、erances specified in the inch/pound units, a request should be made to the contracting officer to determine if the products is acceptable. The contracting officer has the option of accepting or rejecting 0 the product. Requlatorv requirements. Federal Food, Drus, and Cosmetic Act. If the product cov
19、ered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction , offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug Cosmetic Act, as amended, and regulati
20、ons promulgated thereunder. offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal State, and local statutes, ordinances, and regulations. the In addition, the Recovered materials. The offeror/contract
21、or is encouraged to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54 1
22、5 O preservation, packaging, D acking, labelincr, and rnarkincr. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection tu preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the
23、supply source to the receiving activiky, plus reshipment rom receiving activity, and shall consm to applicable carrierk rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as epecified in the contract: and/or order. NOTE: document : The following Nat
24、ional Stock Number is covered by this 6515-00-616-8305 SCISSORS, IRXS, CURVED, 4-7/8 INCH, Qrdering data (Inemediae/exeriu package quantities and labeling and marking must: be specified in the contract and/or order) MILITARY INTERESTS : PREPARXNG ACTIVITY: Custodians: DoD-MB Army-MD Navy-MS Air Force-03 CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAC Agent : DLA-RM Praject: No. 65x5-4814 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
