DS 2017 4-1965 Castle nuts ISO inch screw thread Finished《槽顶螺母 ISO英制螺纹 修整过的》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CEN TR 14520-2007 Packaging - Reuse - Methods for assessing the performance of a reuse system《包装 再利用 再利用系统性能评价方法》.pdf

CEN TR 14549-2004 Guide to the use of ISO 15649 and ANSI ASME B31 3 for piping in Europe in compliance with the Pressure Equipment Directive《关于依照《压力设备指令》在欧洲使用ISO 15649和ANSI ASME B3.pdf

CEN TR 14560-2003 Guidelines for selection use care and maintenance of protective clothing against heat and flame《防热及防火的防护服装的选择 使用 养护和维修指南》.pdf

CEN TR 14568-2003 EN 54 - Fire detection and fire alarm systems - Interpretation of specific clauses of EN 54-2 1997《EN 54-火灾探测和报警设备 EN 54-2-1997特殊条款的解释》.pdf

CEN TR 14585-2-2006 Corrugated metal hose assemblies for pressure applications - Part 2 Guidance on the use of conformity assessment procedures《压力设备用金属波纹软管组件 第2部分 合格评定程序使用指南+C624》.pdf

CEN TR 14585-3-2017 Corrugated metal hose assemblies for pressure applications - Part 3 Design method.pdf

CEN TR 14589-2003 Characterization of waste State of the art document Chromium VI specification in solid matrices《废物料的特性 当前发展文件 固体基质中六价铬规范》.pdf

CEN TR 1459-6-2015 Rough-terrain trucks - Safety requirements and verification C Part 6 Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck《.pdf

CEN TR 14599-2005 Terms and definitions for welding purposes in relation with EN 1792《有关EN 1792的焊接术语和定义 代替CR 14599-2002》.pdf