1、BRITISH STANDARDBS EN 12203:2003IncorporatingCorrigendum Footwear, leather and imitation leather goods manufacturingmachines Shoe and leather presses Safety requirementsICS 59.140.40; 61.080g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g
2、51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2009July 2006National forewordThis British Standard is the UK implementation of EN 12203:2003+A1:2009, incorporating Corrigendum July 2006. It supersedes BS EN 12203:2003, which is withdrawn.The start and f
3、inish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee
4、MCE/3/12, Leather products machinery Safety.A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a
5、 British Standard cannot confer immunity from legal obligations. BS EN 12203:2003+A1:2009This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 28 August 2003 BSI 2009Amendments/corrigenda issued since publicationAmd. No. Date Comments 16531Corrige
6、ndum No. 131 August 2006 Corrections to Clause 2 and Figure 15 31 October 2009 Implementation of CEN amendment A1:2009ISBN 978 0 580 62514 5EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 12203:2003+A1 August 2009 ICS 59.140.40; 61.060 Supersedes EN 12203:2003English Version Footwear, leather an
7、d imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements Machines pour la fabrication des chaussures et articles chaussants en cuir et matriaux similaires - Presses pour la fabrication de chaussures et articles en cuir - Exigences de scurit Maschinen zur Hers
8、tellung von Schuhen, Leder- und Kunstlederwaren - Schuh- und Lederpressen - Sicherheitsanforderungen This European Standard was approved by CEN on 1 November 2002 and includes Corrigendum 1 issued by CEN on 5 July 2006 and Amendment 1 approved by CEN on 16 July 2009. CEN members are bound to comply
9、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management
10、Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the off
11、icial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl
12、ovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN
13、 national Members. Ref. No. EN 12203:2003+A1:2009: EEN 12203:2003+A1:2009 (E) 2Contents page Foreword 5Introduction . 61 Scope 72 Normative references 83 Terms and definitions . 104 !List of significant hazards“ 135 Safety requirements and/or measures 355.1 Common requirements for all shoe and leath
14、er presses 355.1.1 Mechanical Equipment 355.1.2 Additional safety devices 375.1.3 Electrical equipment 375.1.4 Thermal protection 375.1.5 Noise control at the design stage 385.1.6 Fumes detrimental to health . 385.1.7 Ergonomics 385.1.8 Pressurized fluid systems 395.1.9 Control systems . 395.1.10 To
15、ol setting and adjustment . 415.1.11 Feeding system 415.1.12 Aids for transportation 425.2 Specific requirements for particular types of shoe and leather presses. 425.2.1 Sole attaching presses 425.2.2 Sole and insole moulding machines 425.2.3 Back part moulding machine 435.2.4 Backer, lining and to
16、e puff attaching machines . 435.2.5 Ironing presses with rotary table . 435.2.6 Marking, stamping, labelling and embossing machines . 435.2.7 Stitch marking machines 435.2.8 Upper preforming machines . 435.2.9 Automatic shoe and leather presses . 445.2.10 Folding presses . 455.2.11 Activating presse
17、s . 455.2.12 Relasting and last slipping machines . 455.2.13 Top piece attaching presses 455.2.14 Leather button covering machine 466 !Verification of safety requirements and/or protective measures“ 467 Information for use 56!7.1 General 567.2 Signal and warning devices 56!7.3“ Instruction handbook
18、(operating manual) . 56!7.4“ Declared noise emission values . 57!7.5“ !Marking“ . 58Annex A (normative) Requirements for guards . 59A.1 Fixed covers . 59A.2 Movable enclosing guards and movable covers 59A.3 Fencing . 59A.4 !Fixing elements of fixed guards and covers . 60BS EN 12203:2003+A1:2009EN 12
19、203:2003+A1:2009 (E) 3Annex B (normative) Requirements for interlocking devices Interlocking guards with and without guard locking . 61B.1 Interlocking guards without guard locking with one interlocking system and one position sensor . 61B.2 !Interlocking guards without guard locking, with one inter
20、locking system and two position sensors“ 61B.3 Interlocking guards with one interlocking system and one position sensor with guard locking . 61Annex C (normative) Requirements for trip devices . 62C.1 Mechanical trip device with one position sensor . 62C.2 Electro-sensitive protective devices (ESPD)
21、 with normal level 62C.3 Electro-sensitive protective devices (ESPD) with high level 63C.4 Electro-sensitive protective devices (high level) with control function 64Annex D (normative) Requirements for two-hand control devices . 65D.1 Two-hand control devices (normal level) 65D.2 Two-hand control de
22、vices (high level) 65Annex E (normative) Requirements for hold-to-run control devices 68E.1 Hold-to-run control devices (stop function) . 68E.2 Hold-to-run control devices (reverse function) 68Annex F (normative) Requirements for pressure sensitive mats and floors 70Annex G (normative) Requirements
23、for safe tools 71Annex H (normative) Requirements for stop and release control devices . 72Annex I (normative) Requirements for safety stroke devices 73Annex J (normative) Two-fault safety of machine control system 74Annex K (normative) Control measures for the suspension of safeguards . 75Annex L (
24、normative) Requirements for control guards (interlocking guards with start function) . 77Annex M (normative) Temperatures of burn threshold . 78Annex N (normative) Important considerations and requirements for planning, design and construction of automatic manufacturing systems . 79N.1 Project organ
25、isation 79N.2 Application of a safety strategy . 79N.3 Risk assessment 79N.4 Requirements for documentation 79N.5 Starting . 79N.6 Emergency stop . 80Annex O (normative) !Noise test code for shoe and leather presses . 82O.1 Scope 82O.2 Definitions 82O.2.1 Material . 82O.2.2 Processing temperature 82
26、O.2.3 Test cycle . 82O.2.4 Operator standing / sitting area (operating area) . 82O.3 Description of machinery family 82O.4 Measurement of A-weighted sound power level 82O.5 Measurement of A-weighted emission sound pressure level . 83O.5.1 Position of microphone for determination of A-weighted emissi
27、on sound pressure level at the workstation . 83O.6 Operating conditions . 83O.7 Measurement uncertainties 83O.8 Documentation . 83Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“. 85BS EN 12203:2003+A1:2009EN 12203:2003+A1:2
28、009 (E) 4Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 86BS EN 12203:2003+A1:2009EN 12203:2003+A1:2009 (E) 5Foreword This document (EN 12203:2003+A1:2009) has been prepared by Technical Committee CEN/TC 201, “Leather
29、and imitation leather goods and footwear manufacturing machinery - Safety“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting
30、national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document in
31、cludes Amendment 1, approved by CEN on 2009-07-16 and includes Corrigendum 1 issued by CEN on 5 July 2006. This document supersedes EN 12203:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“.The modifications of the related CEN Corrigendum have
32、 been implemented at the appropriate places in the text and are indicated by the tags .!This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Di
33、rective(s), see informative Annexes ZA and ZB, which are integral parts of this document.“!Annexes A to O are normative.“According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
34、 Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 12203:2003+A1:2009EN
35、 12203:2003+A1:2009 (E) 6Introduction !This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are
36、 different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard.“BS EN 12203:2003+A1:2009EN 12203:200
37、3+A1:2009 (E) 71 Scope 1.1 This European Standard is applicable to shoe and leather presses (see 3.1) used in the manufacture of footwear, leather and imitation leather goods and other related components. These machines are: Sole attaching presses (open and closed types); Sole and insole moulding ma
38、chines; Back part moulding machines; Backer, lining and toe puff attaching presses; Ironing presses; Marking, stamping, labelling and embossing machines; Stitch marking machines; Upper preforming machines; Automatic shoe and leather presses; a) Premoulding machines for thermoplastic counters and cou
39、nter forming machines; b) Integrated manufacturing systems; c) Presses with mobile stations and rotary configuration; Folding presses; Activating presses; Relasting and last slipping machines; Top piece attaching presses; Leather button covering machines. 1.2 This European Standard is not applicable
40、 to: Cutting and punching machines; NOTE !See EN 12044.“ Eyelet, hook and decorative nail attaching machines; !deleted text“ Presses used for shoe repair and orthopaedic works NOTE !See EN 12387.“BS EN 12203:2003+A1:2009EN 12203:2003+A1:2009 (E) 81.3 This European Standard specifies safety requireme
41、nts for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, compon
42、ent and system failure. 1.4 This European Standard covers significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (List of hazards see 4.) This European Standard does not deal with precise technical measures for reducing the risks of fumes and dust
43、s detrimental to health. The use of machines within the scope of this European Standard in industries other than those specified in 1.1 can give rise to hazard not considered during its preparation. 1.5 This European Standard is also applicable to additional equipment for material handling and opera
44、tion which are an integral part of the machine. 1.6 This European Standard assumes the machines are operated by adequately trained persons; are used with adequate workplace lighting conforming the local regulations or to EN 12464-1. 1.7 !This document is not applicable to shoe and leather presses wh
45、ich are manufactured before the date of its publication as EN.“2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
46、t (including any amendments) applies.“!deleted text“EN 294:1992, Safety of machinery Safety distance to prevent danger zones being reached by the upper limbsEN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“EN 547-1, Safety of machinery Human bo
47、dy measurements Part 1: Principles for determining the dimensions required for openings for whole body access into machineryEN 547-2, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings!deleted text“EN 574:1996, Safety of machine
48、ry Two-hand control devices Functional aspects Principles for designEN 614-1, Safety of machinery Ergonomic design principles Part 1: Terminology and general principlesEN 626-1:1994, Safety of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 894-2, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: DisplaysBS EN 12203:2
