EN 13201-2-2003 Road lighting Part 2 Performance requirements《公路照明 第2部分 性能要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3336-1999 Aerospace Series Aluminium Alloy AL-P7150-T651 Plate 6mm Less Than a Less Than or Equal to 40mm Edition P 3《航空航天系列.铝合金 AL-P7150-T651板材 6 mm小于或等于a小于或等于40 mm》.pdf

AECMA PREN 3337-1988 Aerospace Series Aluminium Alloy (7010) Solution Treated and Artificially Aged (T74511) Extruded Bars and Sections (a or D) Less Than or Equal to 130 mm with P.pdf

AECMA PREN 3338-2003 Aerospace Series Aluminium Alloy AL-P7050-T74511 Extruded Bar and Section a or D Less Than or Equal to 150 mm with Peripheral Coarse Grain Control Edition P 3《.pdf

AECMA PREN 3339-1998 Aerospace Series Aluminium Alloy AL-P7010-T76 Die Forgings a Less Than or Equal to 200 mm Edition P 2《航空航天系列.铝合金AL-P7010-T76 溶液处理和退火模锻件a小于或等于200 mm》.pdf

AECMA PREN 3340-1988 Aerospace Series Aluminium Alloy (7050) Solution Treated and Artificially Aged (T76) Die Forgings a Less Than or Equal to 200 mm Issue P 1《航空航天系列.铝合金(7050)模锻件a.pdf

AECMA PREN 3341-2003 Aerospace Series Aluminium Alloy AL-P6061-T4 or T42 Sheet and Strip 0 4 mm Less Than or Equal to a Less Than or Equal to 6 mm Edition P 3《航空航天系列.铝合金AL-P6061-T4.pdf

AECMA PREN 3342-2003 Aerospace Series Aluminium Alloy AL-P6061-T4 or T42 Drawn or Extruded Bar and Section a or D Less Than or Equal to 150 mm Edition P 3《航空航天系列.铝合金AL-P6061-T4 或 T.pdf

AECMA PREN 3343-1988 Aerospace Series Aluminium Alloy (7010) Solution Treated and Artificially Aged (T76511) Extruded Bars and Sections 1 Less Than (a or D) Less Than or Equal to 1.pdf

AECMA PREN 3344-2003 Aerospace Series Aluminium Alloy AL-P7050-T76511 Extruded Bars and Section a or D Less Than or Equal to 150 mm with Peripheral Coarse Grain Control Edition P 3.pdf